Banana Pro Build Won't Boot

[TonyGoose]

I've noticed some other threads about Banana Pi builds not booting.  I tried the 6.12v built on Jun 19 and that's when my device stopped booting.  It won't even power on.  I suspect the firmware update is corrupting the MicroSD card.  I originally had an older build running and ran an update/upgrade and my system wouldn't boot (won't power on) after that.  I purchased a new MicroSD card, and my system booted with an older build.  Not realizing my MicroSD would get corrupted, I tried updating/upgrading again and I'm back to not booting.  I don't have enough MicroSD cards to pinpoint the exact package.

 

My working build is from 6.6.17, 24.5.0-trunk.58.  It appears the archive is even older than that!

 

Is there any way to revive a MicroSD card?  I'm using SDFormatter to prep the card and Win32DiskImager to write the image.  

[Igor]

45 minutes ago, TonyGoose said:

I tried updating/upgrading again and I'm back to not booting. 

 

FYI. HDMI out is broken on those board at the moment. Try to access the board remotely. We don't have people to maintain those old boards.