Something went wrong while writing Armbian_community_26.2.0-trunk.7_Aml-s9xx-box_noble_current_6.12.58_cinnamon_desktop.img.xz to Mass Storage Device (armbi_boot, armbi_root) (/dev/sdb)

[Ari Anggoro Gustianto]

Something went wrong while writing Armbian_community_26.2.0-trunk.7_Aml-s9xx-box_noble_current_6.12.58_cinnamon_desktop.img.xz to Mass Storage Device (armbi_boot, armbi_root) (/dev/sdb)

 

When I made a boot with Balena Etecher, it turned out there was an error.

 

Something went wrong while writing Armbian_community_26.2.0-trunk.7_Aml-s9xx-box_noble_current_6.12.58_cinnamon_desktop.img.xz to Mass Storage Device (armbi_boot, armbi_root) (/dev/sdb)

 

I downloaded it from the link provided at https://www.armbian.com/amlogic-s9xx-tv-box/
The file I used was Ubuntu 24.04 (Noble) Cinnamon.

When I finished flashing, Balena couldn't verify the memory card and displayed an error.
Something went wrong while writing Armbian_community_26.2.0-trunk.7_Aml-s9xx-box_noble_current_6.12.58_cinnamon_desktop.img.xz to Mass Storage Device (armbi_boot, armbi_root) (/dev/sdb)

[Werner]

Don't use etcher.

https://docs.armbian.com/User-Guide_Getting-Started/#flash-to-sd-card