ssh missfire on bpi-m5 noble

[gene1934]

I had to install (they were missing) sshfs, then fuse and finally ssh on a bpi-m5, using a 128Gb u-sd as boot media. iso was noble from a week ago's download, and updated at 2nd boot after establishing my /etc/hosts file based network.  I can ssh from it /to/ the main box w/o any problem. But any attempt to reverse into it /from/ another machine /to/ it is "connection reset by peer". I haven't touched /etc/ssh/*config's from default values. Is there something I need to set/reset in those files to restore incoming logins?  And no, I do not enable root logins. Also, systemd is still a puzzle to me if its involved.

 

Thanks for any advice.

[Werner]

what?

 

armbianmonitor -u

[gene1934]

<https://paste.armbian.com/bebayihagi>

 

I did look at it, but nothing yelled at me in a quick scan. Not sure what I s/b looking at.

 

Thank you Werner.

 

 

[eselarm]

31 minutes ago, gene1934 said:

https://paste.armbian.com/bebayihagi

Network is down:

2: end0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000

 

All instances I could find.

 

I think your own networking methods conflict with what is common nowadays and also might be reason ssh server is not even running or depending on a pseudo random situation. Same as for other topic where you could not reach armbian repo server.