Clarion Posted November 26, 2017 Share Posted November 26, 2017 Hello, I bought the Opi Zero plus 2 H5 and installed Armbian and Octoprint unfortunately, I can not find a suitable WirringPi for the H5 so I can address the Gpio. Sorry for my bad English thx for help Link to comment Share on other sites More sharing options...
Larry Bank Posted November 26, 2017 Share Posted November 26, 2017 This is why I created the ArmbianIO project. As long as you're using a mainline kernel (4.1x), it should recognize your board and work. You can get it here: https://github.com/bitbank2/ArmbianIO Link to comment Share on other sites More sharing options...
Clarion Posted November 26, 2017 Author Share Posted November 26, 2017 I take it and have a fatal error i@orangepizeroplus2:~/ArmbianIO$ make -f make_demo cc -c -Wall -O2 main.c main.c:28:23: fatal error: armbianio.h: No such file or directory compilation terminated. make_demo:10: recipe for target 'main.o' failed make: *** [main.o] Error 1 Link to comment Share on other sites More sharing options...
Larry Bank Posted November 26, 2017 Share Posted November 26, 2017 You need to build the library first (just run make). It will copy the .h and .a to the /usr/local directory Link to comment Share on other sites More sharing options...
rusatch Posted November 27, 2017 Share Posted November 27, 2017 9 hours ago, Larry Bank said: This is why I created the ArmbianIO project. As long as you're using a mainline kernel (4.1x), it should recognize your board and work. You can get it here: https://github.com/bitbank2/ArmbianIO Nice project. Thanks for sharing Link to comment Share on other sites More sharing options...
Clarion Posted November 27, 2017 Author Share Posted November 27, 2017 that works thx Link to comment Share on other sites More sharing options...
Recommended Posts