matrasa Posted January 20, 2018 Share Posted January 20, 2018 I buy a touchscreen, with gt811 chip. After that, I google this post: So I try to install new kernel for H3 device. I read this page - https://www.armbian.com/kernel/ and install linux-image-dev-sun8i package. But after reboot my pi board don't work (see pic). How to install this new image properly? Sorry for my English. Link to comment Share on other sites More sharing options...
Igor Posted January 20, 2018 Share Posted January 20, 2018 Dev is "development" branch and possible broken. You have to use: linux-image-next-sunxi linux-headers-next-sunxi linux-dtb-next-sunxi linux-u-boot-orangepipc-next kernel with device tree blob package but is also not completely finished. It is under testing. You can leave headers out of you don't need them. 1 Link to comment Share on other sites More sharing options...
matrasa Posted January 20, 2018 Author Share Posted January 20, 2018 Igor, thank for very much! Just install these packages and now my touchscreen works well! 1 Link to comment Share on other sites More sharing options...
Recommended Posts