Quân Đậu Posted July 25, 2018 Share Posted July 25, 2018 Hi, I have downloaded and installed Armbian to my Pcduino3 board with the legacy kernel 3.4.113. But now I want to downgrade it to the kernel version 3.4.79. Is there any way to do it? Regards, Link to comment Share on other sites More sharing options...
Igor Posted July 25, 2018 Share Posted July 25, 2018 Why would you want to do that? Not enough bugs? Link to comment Share on other sites More sharing options...
Quân Đậu Posted July 25, 2018 Author Share Posted July 25, 2018 Because I want to re-use the compiled kernel modules ( hardwarelib, gpio, adc, pwm) at kernel version 3.4.79 of Linkspirte. Source codes of these modules is not public. Help me please. Link to comment Share on other sites More sharing options...
Igor Posted July 25, 2018 Share Posted July 25, 2018 4 hours ago, Quân Đậu said: Because I want to re-use the compiled kernel modules ( hardwarelib, gpio, adc, pwm) at kernel version 3.4.79 of Linkspirte. Source codes of these modules is not public. Help me please. I am not sure we can help anything in this topic. We don't have kernel 3.4.79 from Linksprite. We never had it. But A20 is very well supported in mainline kernel so you can try to use that instead. I don't have this particular board nor we support it, so some specifical things might make you troubles ... Get last mainline build (or better, build one. You need to use EXPERT="yes" switch for building unsupported images), switch to beta, upgrade and run armbian-config -> system -> hardware and see if you can manipulate any settings. Link to comment Share on other sites More sharing options...
Quân Đậu Posted July 26, 2018 Author Share Posted July 26, 2018 Ok, I'll try it. Thank you very much. Link to comment Share on other sites More sharing options...
Recommended Posts