Marko Milic Posted September 23, 2018 Share Posted September 23, 2018 Hello to you all! I've been running Armbian on H3 board (Orang Pi One) for some time now, with occasional problems that have been resolved one way or another. When I say 'another', I mean by writing image again to sd card, when it gets corrupted somehow. I've been there 3 or 4 times in more than a year. I don't know if it happens because of power loss or whatever, never been able to troubleshoot it and get it back up. I thought I had a similar situation a few days ago, but when I connected to serial, I noticed that it boots, but can't start network interface. I get the following message when ifup eth0: /bin/ip: error while loading shared libraries: /usr/lib/arm-linux-gnueabihf/libelf.so.1: Unable to run arch-specific checks I can't find anything reasonable with the help of favorite web search engine, do you have some idea? Thanks! Link to comment Share on other sites More sharing options...
Igor Posted September 23, 2018 Share Posted September 23, 2018 Have you tried to use some other/better SD card first? Link to comment Share on other sites More sharing options...
Marko Milic Posted September 23, 2018 Author Share Posted September 23, 2018 Hi Igor, thanks for the reply. I've planned to try with another card at some point, and also connecting the board to some kind of continuous power supply. But right now, I need to boot it with network up. Link to comment Share on other sites More sharing options...
Marko Milic Posted September 23, 2018 Author Share Posted September 23, 2018 Hm, I got network running, it seems now like one more filesystem corruption. Is t possible to check system files consistency somehow? Link to comment Share on other sites More sharing options...
Igor Posted September 23, 2018 Share Posted September 23, 2018 11 minutes ago, Marko Milic said: Hm, I got network running, it seems now like one more filesystem corruption. Is t possible to check system files consistency somehow? Check forum which this thread was moved:https://forum.armbian.com/forum/31-sd-card-and-power-supply/ Link to comment Share on other sites More sharing options...
Recommended Posts