0
SaiHou

Olimex Lime A20

Recommended Posts

I have 1 "Customised Olimex Lime A20 SBC with RTL-SDR chip installed in the board (AirNav XRANGE).

 

Currently the OS I'm using is the Lime A20 Armbian Stretch 4.14.84, everything is works fine except for the 2 GPIO LED. I have no idea how to let it work.

 

I have the edited "sun7i-a20-olinuxino-lime.dtb" from Armbian Jessie 4.11.5 which is mainly for the board.

 

May I know is there a way to incorporated the "Armbian Jessie 4.11.5's sun7i-a20-olinuxino-lime.dtb into the A20 Armbian Stretch 4.14.84 so that the 2 LEDs will work again?

 

Quote

/soc@01c00000/pinctrl@01c20800/led_status@0

/soc@01c00000/pinctrl@01c20800/led_adsb@0

 

The edited dtc for LEDs to work  "sun7i-a20-olinuxino-lime.dtb" attached. Hope to get some experts to assist me on this matter. Thanks in advance.

 

Regards,

SaiHou

sun7i-a20-olinuxino-lime.dtb

4.14.84 - sun7i-a20-olinuxino-lime.dtb

Share this post


Link to post
Share on other sites
0