-
Positions
-
Part time technical support
Position: Technical supportNumber of places: 12Applicants: 16 -
Single board computer maintainer
Position: Board maintainerNumber of places: 64Applicants: 76 -
Code reviewer
Position: Framework maintainerNumber of places: UnlimitedApplicants: 11 -
Test Automation Engineer
Position: Software integration test engineerNumber of places: 16Applicants: 10 -
Build framework maintainer
Position: Framework maintainerNumber of places: 16Applicants: 6
-
-
Chat | Social Media
#armbian at
irc.libera.chat or irc.oftc.net
Matrix or Discord
Mastodon | 𝕏 -
Activity Stream
-
47
Rupa X88 Pro 13 - RK3528 board with images
You can send your DTB, that has wi-fi? -
1
The USB ports on my Orange Pi 3B are not working.
Providing logs with armbianmonitor -u helps with troubleshooting and significantly raises chances that issue gets addressed. -
3
How to make displays work correctly (DSI, HDMI)?
I recognize this is an old thread - but there are no newer ones open and I figure having one thread instead of many is best. I'm trying to do the same thing as you OP, getting a raspberry pi DSI display working on a rockpi 4b+. I tried to adapt Radxa's DTS in a similar way you did from Armbian's Base DTS, and seeing what definitions changed and I came up with this non working DTS: Which gives the following DMESG error, very similar to yours: `[ 21.477004] rpi-ts-dsi ff960000.dsi.0: failed to attach dsi to host: -517 [ 21.477086] mipi-dsi ff960000.dsi.0: deferred probe pending: (reason unknown)` You'll note various differences between our DTS, like panel_in instead of panel_in_dsi, and mipi_dsi instead of mipi_dsi1. I based these off looking at the base DTS in Armbian kernel 6.18.32, but also on this project I found recently that brings support for 7 and 10 inch Osoyoo brand of DSI panels to the RockPi 4b+. I think that's really promising and will help with bringing DTS support to the raspberry pi panel (and others that are compatible). I recommend you look into it. I will continue iterating and update this thread with results if any. I don't think OP was pinning the problem on Armbian. OP was asking how to configure a custom DTS to work with the hardware they have. This is the community support forum, which is the correct place for this kind of discussion. -
4
Helios64 hangs with 26.2.1 / 6.18.10 kernel on cpu5
You could flash armbian to an SDcard, then set Jumper P10 to force UBoot to skip booting from EMMC and pick the sdcard instead. From there you can directly mount the internal storage and chroot into it to run armbian-config and enable the overlay. -
1
The USB ports on my Orange Pi 3B are not working.
Hello, I flashed the latest KDE version to the SD card of my Orange Pi 3B using Armbian Imager, but for some reason the USB ports are not working at all. There's no power coming from the USB ports, and the keyboard backlight isn't working at all. What could be the reason? Can you help me? I've never experienced anything like this before.
-
-
Member Statistics
