Building the image was surprisingly simple and my first impression is that it works just fine. Thank you all so much!
I uploaded the image Armbian_5.74_Bananapim2ultra_Debian_stretch_dev_4.20.6 here, in case anyone would need it: http://www.share-online.biz/dl/YQ026FMP1LO (I hope this link is allowed; sorry, if not).
Building the image was surprisingly simple and my first impression is that it works just fine. Thank you all so much!
I uploaded the image Armbian_5.74_Bananapim2ultra_Debian_stretch_dev_4.20.6 here, in case anyone would need it: http://www.share-online.biz/dl/YQ026FMP1LO (I hope this link is allowed; sorry, if not).
You can, but not in this section, but here: https://forum.armbian.com/forum/23-community-forums BTW. board boots, just HDMI is broken - fixed in 4.20.y+
@Mario Schmidt Dont give up
The actual 4.20.6 image for the M2 Ultra does boot fine on the M2 Berry and HDMI/WiFi is working (tested console-server).
But it isnt directly downloadable at this time - you have to compile the image with the armbian-build-system: https://docs.armbian.com/Developer-Guide_Build-Preparation/
A small virtual (or real) Ubuntu-18.04-x64-Mini-Server and some commands and you are up and running for compiling the DEV-image with 4.20.6
login as: root
root@192.168.6.20's password:
____ ____ _ __ __ ____ ____
| __ )| _ \(_) | \/ |___ \ | __ ) ___ _ __ _ __ _ _
| _ \| |_) | | | |\/| | __) | | _ \ / _ \ '__| '__| | | |
| |_) | __/| | | | | |/ __/ | |_) | __/ | | | | |_| |
|____/|_| |_| |_| |_|_____| |____/ \___|_| |_| \__, |
|___/
Welcome to ARMBIAN 5.74 user-built Debian GNU/Linux 9 (stretch) 4.20.6-sunxi
System load: 0.02 0.17 0.09 Up time: 4 min
Memory usage: 6 % of 1000MB IP: 192.168.6.20
Usage of /: 7% of 15G
[ General system configuration (beta): armbian-config ]
Last login: Mon Feb 4 20:49:08 2019
root@bpi-m2-berry(192.168.6.20):~# uname -a
Linux bpi-m2-berry 4.20.6-sunxi #5.74 SMP Mon Feb 4 16:30:46 +03 2019 armv7l GNU/Linux
root@bpi-m2-berry(192.168.6.20):~# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.6.20 netmask 255.255.255.0 broadcast 192.168.6.255
inet6 fe80::53:bcff:fe93:a802 prefixlen 64 scopeid 0x20<link>
ether 02:53:bc:93:a8:02 txqueuelen 1000 (Ethernet)
RX packets 1337 bytes 111725 (109.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 893 bytes 162240 (158.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 34
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.6.28 netmask 255.255.255.0 broadcast 192.168.6.255
inet6 fe80::b2f1:ecff:fe21:703e prefixlen 64 scopeid 0x20<link>
ether b0:f1:ec:21:70:3e txqueuelen 1000 (Ethernet)
RX packets 2 bytes 276 (276.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 12 bytes 1276 (1.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
top - 21:10:37 up 22 min, 3 users, load average: 0.07, 0.04, 0.03
Tasks: 110 total, 1 running, 60 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.1 us, 0.2 sy, 0.0 ni, 99.8 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st
KiB Mem : 1024580 total, 838916 free, 73200 used, 112464 buff/cache
KiB Swap: 512288 total, 512288 free, 0 used. 922740 avail Mem
Here in this screenshots you will see the M2 Ultra image with some of my optical configurations - so for me its look better at the M2 Berry
Mario Schmidt got a reaction from Igor in Banana Pi M2 Berry won't boot
Mario Schmidt got a reaction from guidol in Banana Pi M2 Berry won't boot
Mario Schmidt reacted to chwe in Banana Pi M2 Berry won't boot