balbes150

Ver 20230626-legacy - fix WiFi and BT

To fix the sound, need to check the kernel. Is there a version of the image where the sound worked?

Can you check the installation on eMMC and show the startup log UART from eMMC, after installing Armbian on eMMC on the original Android ? To install, use armbian-install.

@NicoD To run from an SD card, after writing the image, add the boot.ini file to the root dir (exactly to the root dir, not to the subdirectory, i.e. it should be like this /boot.ini) And so far, the UART log at this launch. https://disk.yandex.ru/d/rYwlbXIDWg1gvQ

With this, too, everything is clear, tomorrow I will try to send you a correction.

Tnx. I saw the reason what is missing to run Armbian if the default Android firmware is used. ^)

I only need the output of the u-boot operation, before the kernel starts running Android. You can easily "limit" the desired output - when the kernel startup lines start (line "Start kernel ..."), just turn off the power. I also need the same log to run Armbian from an Sd card.

Ver 20230623-legacy - fix 8Gb RAM work LAN, USB, SD, HDMI, analog and HDMI sound

If possible, I am interested in the Armbian startup log from the SD card with the VIM3 in its normal state, as it arrives to users upon purchase (i.e. the default factory state of SPI\eMMC).

Test version of images 20230622-legacy for star64. https://disk.yandex.ru/d/eEC4riP1jBWCeg Important. For the system to work correctly, you need to update the bootloader once. To do this, download the image from the link https://disk.yandex.ru/d/zsqznfa1ySI2gw burn it to the SD card, connect it to Star64 and turn on the power, wait 2 minutes and turn off the power. After that, you can write an ArmbianTV image to the SD card, connect it to Star64 and the system will start automatically. The next steps are usually the initial setup of Armbian. In versions with DE (IceWM XFCE). even video playback in the window works (fullscreen mode does not work) through the Parole player. Analog audio output is enabled by default, to switch to HDMI audio, use the settings via Volume Control as usual. root@192.168.1.51's password: ____ _ __ _ _ / ___|| |_ __ _ _ __ / /_ | || | \___ \| __/ _` | '__| '_ \| || |_ ___) | || (_| | | | (_) |__ _| |____/ \__\__,_|_| \___/ |_| Welcome to Armbian 23.06 Jammy with Linux 5.15.115-star64 System load: 3% Up time: 3 min Memory usage: 3% of 3.80G IP: 192.168.1.51 CPU temp: 39°C Usage of /: 17% of 7.1G RX today: 19.4 KiB [ 10 security updates available, 12 updates total: apt upgrade ] Last check: 2023-06-22 12:32 [ General system configuration (beta): armbian-config ] Last login: Thu Jun 22 12:32:24 2023 root@star64:~# cat /proc/cpuinfo processor : 0 hart : 1 isa : rv64imafdc mmu : sv39 isa-ext : uarch : sifive,u74-mc processor : 1 hart : 2 isa : rv64imafdc mmu : sv39 isa-ext : uarch : sifive,u74-mc processor : 2 hart : 3 isa : rv64imafdc mmu : sv39 isa-ext : uarch : sifive,u74-mc processor : 3 hart : 4 isa : rv64imafdc mmu : sv39 isa-ext : uarch : sifive,u74-mc root@star64:~# neofetch .-/+oossssoo+/-. root@star64 `:+ssssssssssssssssss+:` ----------- -+ssssssssssssssssssyyssss+- OS: Ubuntu 22.04.2 LTS riscv64 .ossssssssssssssssssdMMMNysssso. Host: Pine64 Star64 /ssssssssssshdmmNNmmyNMMMMhssssss/ Kernel: 5.15.115-star64 +ssssssssshmydMMMMMMMNddddyssssssss+ Uptime: 4 mins /sssssssshNMMMyhhyyyyhmNMMMNhssssssss/ Packages: 509 (dpkg) .ssssssssdMMMNhsssssssssshNMMMdssssssss. Shell: bash 5.1.16 +sssshhhyNMMNyssssssssssssyNMMMysssssss+ Resolution: 1920x1080 ossyNMMMNyMMhsssssssssssssshmmmhssssssso Terminal: /dev/pts/0 ossyNMMMNyMMhsssssssssssssshmmmhssssssso CPU: (4) @ 1.500GHz +sssshhhyNMMNyssssssssssssyNMMMysssssss+ Memory: 118MiB / 3893MiB .ssssssssdMMMNhsssssssssshNMMMdssssssss. /sssssssshNMMMyhhyyyyhdNMMMNhssssssss/ +sssssssssdmydMMMMMMMMddddyssssssss+ /ssssssssssshdmNNNNmyNMMMMhssssss/ .ossssssssssssssssssdMMMNysssso. -+sssssssssssssssssyyyssss+- `:+ssssssssssssssssss+:` .-/+oossssoo+/-. root@star64:~#

Igor asked me to help you with the launch of Armbian. Show the UART startup log in two states - Armbian start from SD card and kreskue start from SD card. IMHo kreskue is a bad tool and I would not advise using it, everything can be done without it.

In the LEGACY image (20230620), I can see how the fan turns on for a second when turned off. I have not yet been able to load the device to reach a temperature above 65 degrees in order to evaluate the operation of the fan under load. On the latest legacy version (20230620), I see the availability of available networks in the network management interface. Wi-fi has the lowest priority for me, I don't check and test it. This is as it should be, this is a common group for all 3588.

ver edk2-efi kernel 6.2 + mesa-23 (pancsf) user@firefly-itx-3588j:~$ glmark2-es2-wayland ======================================================= glmark2 2021.02 ======================================================= OpenGL Information GL_VENDOR: Mesa GL_RENDERER: Mali-G610 (Panfrost) GL_VERSION: OpenGL ES 3.1 Mesa 23.2.0-devel (git-8aa5ca2f01) ======================================================= [build] use-vbo=false: FPS: 4457 FrameTime: 0.224 ms [build] use-vbo=true: FPS: 5987 FrameTime: 0.167 ms [texture] texture-filter=nearest: FPS: 6159 FrameTime: 0.162 ms [texture] texture-filter=linear: FPS: 6215 FrameTime: 0.161 ms [texture] texture-filter=mipmap: FPS: 6110 FrameTime: 0.164 ms [shading] shading=gouraud: FPS: 5176 FrameTime: 0.193 ms [shading] shading=blinn-phong-inf: FPS: 4849 FrameTime: 0.206 ms [shading] shading=phong: FPS: 4389 FrameTime: 0.228 ms [shading] shading=cel: FPS: 4431 FrameTime: 0.226 ms [bump] bump-render=high-poly: FPS: 2161 FrameTime: 0.463 ms [bump] bump-render=normals: FPS: 6730 FrameTime: 0.149 ms [bump] bump-render=height: FPS: 6675 FrameTime: 0.150 ms [effect2d] kernel=0,1,0;1,-4,1;0,1,0;: FPS: 5899 FrameTime: 0.170 ms [effect2d] kernel=1,1,1,1,1;1,1,1,1,1;1,1,1,1,1;: FPS: 2946 FrameTime: 0.339 ms [pulsar] light=false:quads=5:texture=false: FPS: 6197 FrameTime: 0.161 ms [desktop] blur-radius=5:effect=blur:passes=1:separable=true:windows=4: FPS: 1584 FrameTime: 0.631 ms [desktop] effect=shadow:windows=4: FPS: 4124 FrameTime: 0.242 ms [buffer] columns=200:interleave=false:update-dispersion=0.9:update-fraction=0.5:update-method=map: FPS: 550 FrameTime: 1.818 ms [buffer] columns=200:interleave=false:update-dispersion=0.9:update-fraction=0.5:update-method=subdata: FPS: 563 FrameTime: 1.776 ms [buffer] columns=200:interleave=true:update-dispersion=0.9:update-fraction=0.5:update-method=map: FPS: 711 FrameTime: 1.406 ms [ideas] speed=duration: FPS: 2309 FrameTime: 0.433 ms [jellyfish] <default>: FPS: 2977 FrameTime: 0.336 ms [terrain] <default>: FPS: 195 FrameTime: 5.128 ms [shadow] <default>: FPS: 2940 FrameTime: 0.340 ms [refract] <default>: FPS: 455 FrameTime: 2.198 ms [conditionals] fragment-steps=0:vertex-steps=0: FPS: 5845 FrameTime: 0.171 ms [conditionals] fragment-steps=5:vertex-steps=0: FPS: 5401 FrameTime: 0.185 ms [conditionals] fragment-steps=0:vertex-steps=5: FPS: 5759 FrameTime: 0.174 ms [function] fragment-complexity=low:fragment-steps=5: FPS: 5473 FrameTime: 0.183 ms [function] fragment-complexity=medium:fragment-steps=5: FPS: 5021 FrameTime: 0.199 ms [loop] fragment-loop=false:fragment-steps=5:vertex-steps=5: FPS: 5413 FrameTime: 0.185 ms [loop] fragment-steps=5:fragment-uniform=false:vertex-steps=5: FPS: 5463 FrameTime: 0.183 ms [loop] fragment-steps=5:fragment-uniform=true:vertex-steps=5: FPS: 5076 FrameTime: 0.197 ms ======================================================= glmark2 Score: 4189 =======================================================

there is no easy way, if you need a new kernel, use the appropriate image with a new kernel.

Test versions are available. I will post all the details on the forum at the link. https://bbs.stationpc.com/forum.php?mod=viewthread&tid=411&extra=page%3D1%26filter%3Dauthor%26orderby%3Dlastpost

ver 20230616-edge kernel 6.4-rc6 (HDMI not work) work - SD card, USB, wifi. management is possible via UART or USB-LAN root@192.168.1.19's password: _ _ _ | \ | | ___ ___| |__ __ _ | \| |/ _ \_ / '_ \ / _` | | |\ | __// /| | | | (_| | |_| \_|\___/___|_| |_|\__,_| Welcome to Armbian 22.08.0-trunk Jammy with Linux 6.4.0-rc6-d1 System load: 129% Up time: 2 min Memory usage: 19% of 478M IP: 192.168.1.19 Usage of /: 5% of 29G RX today: 23.6 KiB [ 5 security updates available, 8 updates total: apt upgrade ] Last check: 2023-06-16 09:56 [ General system configuration (beta): armbian-config ] Last login: Fri Jun 16 09:55:59 2023 root@nezha:~# neofetch .-/+oossssoo+/-. root@nezha `:+ssssssssssssssssss+:` ---------- -+ssssssssssssssssssyyssss+- OS: Ubuntu 22.04.2 LTS riscv64 .ossssssssssssssssssdMMMNysssso. Host: Allwinner D1 Nezha /ssssssssssshdmmNNmmyNMMMMhssssss/ Kernel: 6.4.0-rc6-d1 +ssssssssshmydMMMMMMMNddddyssssssss+ Uptime: 6 mins /sssssssshNMMMyhhyyyyhmNMMMNhssssssss/ Packages: 529 (dpkg) .ssssssssdMMMNhsssssssssshNMMMdssssssss. Shell: bash 5.1.16 +sssshhhyNMMNyssssssssssssyNMMMysssssss+ Terminal: /dev/pts/0 ossyNMMMNyMMhsssssssssssssshmmmhssssssso CPU: (1) ossyNMMMNyMMhsssssssssssssshmmmhssssssso Memory: 97MiB / 478MiB +sssshhhyNMMNyssssssssssssyNMMMysssssss+ .ssssssssdMMMNhsssssssssshNMMMdssssssss. /sssssssshNMMMyhhyyyyhdNMMMNhssssssss/ +sssssssssdmydMMMMMMMMddddyssssssss+ /ssssssssssshdmNNNNmyNMMMMhssssss/ .ossssssssssssssssssdMMMNysssso. -+sssssssssssssssssyyyssss+- `:+ssssssssssssssssss+:` .-/+oossssoo+/-. root@nezha:~# cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdc mmu : sv39 uarch : thead,c906 mvendorid : 0x5b7 marchid : 0x0 mimpid : 0x0

Ver 20230615-current

You have not installed the correct u-boot from this theme in SPI\MTD.

Version 20230401 with kernel 6.2 (pancsf-midstream). With HDMI USB support. https://disk.yandex.ru/d/W8pOOhizVjq91A To enable HW acceleration, install the mesa package with the forced overwrite option or an archive to enable acceleration for wayland. To enable wayland acceleration, you need to replace the files in the /usr/lib/aarch64-linux-gnu directory with the contents of the archive (with file replacement). After that, acceleration will work with wayland. X11 and wayland acceleration works the same way on Debian Sid (the images are the same as Ubuntu). After starting the system and initial configuration, replace the files from the archive in the same way and acceleration will work. The results of running in Debian Sid Gnome for x11 and wayland. dpkg -i --force-overwrite mesa_23.0.0-dev-2_arm64.deb After installation and reboot, HW acceleration will work in x11 and wayland. Please note, this is a test version of mesa for the initial evaluation of the work, some of the functions do not work in it and there may be bugs. With x11, the system works more stably, but the test results are lower than in gnome+wayland. deb\archive https://disk.yandex.ru/d/h8c-Y2FfAvx76g

Version 20230325-edge with kernel 6.2 (pancsf-midstream). With HDMI USB LAN support. https://disk.yandex.ru/d/Xt36QdVcxRdEDA

A test version of Armbian images to run from NVMe without having to write the curve of the official u-boot version to SPI (which breaks the launch of other systems from SD cards and other media). The whole system works completely with NVMe . https://disk.yandex.ru/d/V5AxXNN2yJnOfg The installation of the system on NVMe and u-boot in SPI was checked using the standard tools of the armbian-config utility. Everything works correctly. Also in this new u-boot, the ability to start the system in EFI mode is available. To install a system with EFI\grub on NVMe. Install a new bootloader in SPI. Start the system from the SD card and burn the system image with the EFI\grub DD utility to NVMe. images with EFI\grub support are located in directories with the extension "EFI"

Test version of the Armbian+EDK2 system (UEFI\grub) is available. The system startup control is performed as on a regular PC - through the menu on the monitor screen, therefore, to fully use all the features of selective startup, you need to have a connected monitor and keyboard To use this option. Download the EDK2 image. https://users.armbian.com/balbes150/edk2/ https://disk.yandex.ru/d/kK6KIqHShRHLyw Unpack and burn to SD card. Download the Armbian image (kernel 6.1.0-rc7), For Station M2 https://disk.yandex.ru/d/C4Ql9v0BvhKPjQ For Station P2 https://disk.yandex.ru/d/5XuGz9WgF7FGCg unpack and burn it to a USB drive (8-16GB flash drives are recommended, I haven't checked other options). Connect the SD card and USB drive. Turn on the power. If the system does not start immediately, go to settings and select the device to start. On the EDK2 boot screen, select "Maintaining Manager boot" in the menu item and configure the device used for startup in it (change "none" to "UEFI ...."). Select Reset. If you did everything correctly, after restarting EDK2, you will receive a GRUB menu with a choice of system\kernel. If you do not select anything, the default system will be started in 5 seconds, and in 10-20 seconds (depending on the type of USB flash drive) there will be a standard Armbian customizer for the first launch. If desired, you can place the entire system on an SD card, but additional steps will be required at startup. At startup, the kernel switches the UART console to the correct value for RK (1500000) and you can monitor the kernel startup process and control the system through the UART console. That is, the parameters 115200 can only be useful for viewing the primary output from EDK2 itself, but this is only necessary for developers, for ordinary users, kernel output and system management are more useful, so I recommend using the standard value for Rockchip of 150000. https://github.com/150balbes/edk2_uefi

Alpha version of Armbian images for OrangePi 800. https://disk.yandex.ru/d/3Xta87KhFem-Bw

The first version of Armbian images for Station M3 rk3588s (rk3588s-roc-pc) is available. the launch is very simple - download, unpack, burn to an SD card, connect to the device and turn on the power. The system starts automatically. At the first launch, perform the initial setup in the same way as all Armbian-enabled devices. https://disk.yandex.ru/d/-zSW21XKN0pfIA

Added alpha version of image build support for RISC-V. So far, this is an early version and some of the functions do not work in it. Currently, support has been added for the StarFive model. https://rvspace.org/ Details can be seen in this topic. https://forum.rvspace.org/t/armbian-for-starfive-build-system-ubuntu-debian/468 Added support for Nezha D1 and Lichee RV (Dock) with Allwinner D1 RISC-V chip. To start the system. Download the image, unpack it, burn it to the SD card. Connect the SD card to the device and turn on the power. Further steps for initial setup are similar for all Armbian systems. For the Nezha D1 model, HDMI, LAN, USB, analog audio via 3.5 jack works. For Lichee RV Dock works HDMI WiFi USB USB-LAN Link to download images. https://disk.yandex.ru/d/da8qJ8wyE1hhcQ https://www.cnx-software.com/2021/12/30/sipeed-lichee-rv-risc-v-module-gets-5-carrier-board-with-hdmi-and-usb-ports-optional-wifi/ forum MangoPI https://forum.mangopi.org/