SteeMan

Doing some forum cleanup and moved this thread to the appropriate forum

Start by reading the following two FAQ posts: https://forum.armbian.com/topic/16976-status-of-armbian-on-tv-boxes-please-read-first and https://forum.armbian.com/topic/17106-installation-instructions-for-tv-boxes-with-amlogic-cpus

Moved post to the correct forum

Please read the following two FAQ posts first: https://forum.armbian.com/topic/16976-status-of-armbian-on-tv-boxes-please-read-first and https://forum.armbian.com/topic/17106-installation-instructions-for-tv-boxes-with-amlogic-cpus

Moved to new thread in appropriate forum

My first thought is that you don't actually have emmc in your box. You don't provide any details, so I am just guessing. I have 'identical' TX3 Mini boxes that on one the emmc works fine and the other it is not detected. When I opened the box, it turned out the manufacturer installed cheaper nand instead of the claimed emmc. And mainline kernels don't support nand storage. It is very common that boxes may not contain the components claimed (or can change randomly over time in an effort to cut production costs). This is one of many reasons TV boxes aren't supported by Armbian. https://forum.armbian.com/topic/16976-status-of-armbian-on-tv-boxes-please-read-first/

Moved post to the correct forum

@brusli Also given that the archived builds @s-petersen linked to are over 3 years old, I'm not sure they are something you would want to use anyway (even if you trust a random third party download site). Three year old builds equal three years of unpatched security vulnerabilities.

@hadestlse It is assumed that you have the knowledge and skills to build linux kernels and apply patches if you are going to attempt to do that. If not then I wouldn't recommend trying to incorporate the patch @hexdump referenced above. Not knowing your level of developer knowledge, I would first point you towards the Armbian developer docs. https://docs.armbian.com/Developer-Guide_Build-Preparation/

Please start by reading the two TV Box FAQ posts: https://forum.armbian.com/topic/16976-status-of-armbian-on-tv-boxes-please-read-first and https://forum.armbian.com/topic/17106-installation-instructions-for-tv-boxes-with-amlogic-cpus

Moved post to correct forum

Moved post to the correct forum. Please read: https://forum.armbian.com/topic/16976-status-of-armbian-on-tv-boxes-please-read-first The build you are using is over 2 and a half years old. Please read: https://forum.armbian.com/topic/17106-installation-instructions-for-tv-boxes-with-amlogic-cpus (Note that you may need to change the extlinux.conf file to read: "LINUX /uImage" , I am investigating an issue, but I haven't yet confirmed it on an s905x3 box like yours).

@vcmsptx Also, there is no meson-g12a-gt1-mini-a dtb file in these builds. Where did you get that? And are you sure you put it in the correct location? Also are you sure that dtb file is compatible with a mainline kernel?

@vcmsptx with the new builds (i.e. the 6.0.x kernels) try changing the extlinux.conf file to use: LINUX /uImage I noticed an issue that the u-boot currently packaged (u-boot-s905x2-s922) doesn't boot the Image binary but will boot the uImage kernal binary. At least this is the case on my s905x2 based box. If you can confirm this same behavior on your box, that would be helpful.

@vcmsptx What build and instructions are you using?

The first place to start is with the following two FAQ posts: https://forum.armbian.com/topic/16976-status-of-armbian-on-tv-boxes-please-read-first https://forum.armbian.com/topic/17106-installation-instructions-for-tv-boxes-with-amlogic-cpus

The first place to start is with the following two FAQ posts: https://forum.armbian.com/topic/16976-status-of-armbian-on-tv-boxes-please-read-first https://forum.armbian.com/topic/17106-installation-instructions-for-tv-boxes-with-amlogic-cpus

Please read the following FAQ post: https://forum.armbian.com/topic/16976-status-of-armbian-on-tv-boxes-please-read-first (Short answer is: don't expect wifi to work on TV Boxes)

As an unsupported board, the 4C+ only exists on the Community Supported boards page: https://github.com/armbian/community

@Cliff There is no official Armbian software for this box as this is not a supported box by Armbian. If I may ask, where did you get this 'official' armbian from? The only reason I ask, is if there is something that leads people to believe something is supported when it isn't, that is an area that we can improve docs/website, etc to avoid future confusion.

Correct. This if from the Inovato website: IMPORTANT NOTE: If you have any questions or problems with this process, by all means use the Armbian Forums to search for information, but please DO NOT ask questions if you can't find your answer. They don't support the Quadra firmware: We do. So please use the Support category on this forum.

@Titus The software you have installed is not from Armbian. That developer has a fork of Armbian but does not participate in Armbian development nor these forums. In fact they use the Armbian name without permission. You will need to contact the developer who provided this software to you for your questions/support.

Please provide more information, I can't guess as to what you are doing/seeing. That is what is supposed to happen. Pressing the reset button during boot will cause the board to load the multiboot setup from an sd card. This is something you should only need to do once. You mention usb, do you mean sd card? What happens after you release the reset button?

Read the TV Box FAQ items on this forum: https://forum.armbian.com/topic/16976-status-of-armbian-on-tv-boxes-please-read-first https://forum.armbian.com/topic/17106-installation-instructions-for-tv-boxes-with-amlogic-cpus

@wapins The build you are using is a fork of Armbian. That developer has no association with armbian and does not interact with armbian developers or these forums. They use the armbian name without permission. You need to post your question in their forums as we can't help you here.