snakekick
-
Posts
19 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by snakekick
-
-
Kernel 5.15.93 (get not "stable" with 6x kernel)
linux-u-boot-current-helios64_21.08.9_arm64.deb
Uptime 20 Days (but kernel panic after ±30 Days)
CPU Speed:
MIN_SPEED=600000
MAX_SPEED=1200000
GOVERNOR=ondemand
Systemusage:
Fileserver (Mergerfs/Snapraid with 5 SSD+1USB HDD with daily diff/scrub/sync )
Webserver
1 Docker Container
./cpufreq-switching-2-b_delay_5000
allocated 64MB
test: toggle freq before write
0/100 cpub_freq 600000
cpub_freq 816000
cpub_freq 1008000
cpub_freq 1200000
cpub_freq 1416000
cpub_freq 1608000
cpub_freq 1800000
cpub_freq 1608000
cpub_freq 1416000
cpub_freq 1200000
cpub_freq 1008000
cpub_freq 816000
cpub_freq 600000
cpub_freq 408000
cpub_freq 600000
cpub_freq 816000
cpub_freq 1008000
kernelpanic
-
hello mikeakers,
you can test you memory with
for i in $(seq 1 100);do python3 -c "import pkg_resources" || break;done
it is possible that bootloader was also updated during the update to bookworm and that can be a problem
if this run 5-6 times without errors you try to limit the cpu speed with armbian-config
for me, my system only run "stable" with 600-1200mhz
-
-
Hi,
I have also been testing Bookworm for a week.
I start with a clean install and use snapraid.
Before bookworm I use kernel 5.15 with Bullseye. To get a stable system I have to limit my cpu to 600>1200mhz on demand.
Now with bookworm and kernel 6.1.36 these settings are not enough. Every time I start a snapraid sync I get kernel ops.
I'm now back to kernel 5.15 with debian bookworm and it looks more stable (1 full sync successful)
//edit.
system is still unstable.
i found a good fast test
for i in $(seq 1 100);do python3 -c "import pkg_resources" || break;done
give me a free() invalid pointer issue
I found in this thread that there can be a problem with memory speed detection?
https://github.com/armbian/build/issues/4761
/edit 2
For me, it looks like the new uboot version from here https://github.com/armbian/build/issues/4761
Solved all my problems. Snapraid sync --force-full without any problems (ran 6 hours) and the python3 test (6 times) also without any errors.
and best of all, the helios are now running at full speed! 400>1800MHz on demand
this was not possible before the uboot update. if i understand correctly. the ddr memory now dects better with correct speed settings.
edit3
hahaha
Rejoyed too soon
kernel:[47341.023705] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Message from syslogd@helios64 at Aug 22 10:59:53 ...
kernel:[47341.023705] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Message from syslogd@helios64 at Aug 22 10:59:53 ...
kernel:[47341.045273] Code: aa1c03e0 93407c62 2a0803e1 9400819e (a9408261)
;(
-
Hello, can sombody please explane the current status?
is it secure to make a apt update (and reboot) or is update now not possible or recomment
-
Hi,
a new version armbian-bsp-cli-helios64 (21.05.4) released today but still have the same error. ;((
-
Hello,
i don´t have a xserver installed so i don´t have and can use xrandr
log´s are here.
thanks you
-
Hello,
today i try a USB C to HDMI Adapter and i get some picture on tv but it´s really unreadable and my log is full of this:rockchip-vop ff8f0000.vop: [drm:vop_plane_atomic_update [rockchipdrm]] *ERROR* Maximum dst width (3840) exceeded
it is possible to restrict the resolution in the terminal? i think this error ocure because to high resolution or wrong detection
Thank you
-
...now i got the same ....
5 SDD SanDisk SDSSDH3 2T00
but yet only with one disk.
no zfs but snapraid with daily check and scrub
[Sat May 8 20:16:25 2021] ata4.00: exception Emask 0x10 SAct 0x80000 SErr 0xb80100 action 0x6
[Sat May 8 20:16:25 2021] ata4.00: irq_stat 0x08000000
[Sat May 8 20:16:25 2021] ata4: SError: { UnrecovData 10B8B Dispar BadCRC LinkSeq }
[Sat May 8 20:16:25 2021] ata4.00: failed command: READ FPDMA QUEUED
[Sat May 8 20:16:25 2021] ata4.00: cmd 60/00:98:40:0d:fa/04:00:56:00:00/40 tag 19 ncq dma 524288 in
res 40/00:9c:40:0d:fa/00:00:56:00:00/40 Emask 0x10 (ATA bus error)
[Sat May 8 20:16:25 2021] ata4.00: status: { DRDY }
[Sat May 8 20:16:25 2021] ata4: hard resetting link
[Sat May 8 20:16:25 2021] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[Sat May 8 20:16:25 2021] ata4.00: configured for UDMA/133
[Sat May 8 20:16:25 2021] sd 3:0:0:0: [sdd] tag#19 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=0s
[Sat May 8 20:16:25 2021] sd 3:0:0:0: [sdd] tag#19 Sense Key : 0x5 [current]
[Sat May 8 20:16:25 2021] sd 3:0:0:0: [sdd] tag#19 ASC=0x21 ASCQ=0x4
[Sat May 8 20:16:25 2021] sd 3:0:0:0: [sdd] tag#19 CDB: opcode=0x28 28 00 56 fa 0d 40 00 04 00 00
[Sat May 8 20:16:25 2021] blk_update_request: I/O error, dev sdd, sector 1459227968 op 0x0:(READ) flags 0x80700 phys_seg 127 prio class 0
[Sat May 8 20:16:25 2021] ata4: EH complete
-
when i now read the Helios64 Production Update 4
https://blog.kobol.io/2020/08/23/helios64-update4/
"Our test successful rate is not as high as we expected. It turned out that our FAT software was a bit too strict resulting in some board failing the FAT while they are actually OK"
its get a little bit bad taste...
-
Hello,
i want use and control kodi on my Helios64 with the tv remote.
Have someone experiance with that and
a recommendation for cables or usb c dockingstation?thank you
-
-
-
my helios have the same problem after 5-7 days.
not useable for a real nas ;(
-
Hello,
i have a litte problem with my armbian/helios.
I use a usb hdd for "backup" (snapraid parity) that only need to run every 2 days so that i unmount the drive and put this in standby (hdparm -y /dev)
All goes well but after some time the drive awake again (without mount) and i dont know how i can prefent this.
does anyone have an idea where I can look
thanks for help.
-
This changelog say thats now work with kernel 5.9? Displayport over USB C
-
hello,
while i am copy files on my server and start 1 or 2 torrent i see that my memory gett less.Yes thats only buffer and caches but he eat faster then he get free so that he starts swapping (what cost cpu and speed)
a litte search and i see that
cat > /proc/sys/vm/swappiness is 100 and look on my other systems it is set to 60
now woth change this value he dont start swapping and free up faster the memory.
can someone explane me why this here is set to 100?
thank you
-
Hello,
for me with ubuntu it´s work great to add this ppa and all things are fine
https://launchpad.net/~jonathonf/+archive/ubuntu/zfs?field.series_filter=focal
you need only install kernel headers with armbian config and than you can install zfs-dkms
Helios64 - Armbian 23.08 Bookworm issues (solved)
in Rockchip
Posted · Edited by snakekick
Thank you @ebin-dev same here, 6.6.29 (much more) stable with your dtb.
I know we are all the community and can make changes but... is it possible for you to make a ticket/change request or as its called to add your changes to the main armbian image?
so that we have a good running Helios out of the box?
That would be fantastic!