![](https://forum.armbian.com/uploads/set_resources_18/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
![](https://forum.armbian.com/uploads/n2a/n2a-0eb2392eec4fa13842ccb06c32086a903a8ab5c3.avatars_letters.png)
hannah
-
Posts
16 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by hannah
-
-
11 hours ago, lcapriotti said:
TX3 first version (BZ, 100Mb eth), no luck with eth with these DTBs.
I will keep on trying..
High resolution PCB Pic: https://ibb.co/zbqW5HH
My PCB version is QZ:
CS_905X3_TX95_B4_QZ_V1.2
-
-
I read this:
```
Could You please Post here some Information, about the BlueTooth-Config-Details?
```
What exactly are you after please? With those 2 above .dtbs it simply works. No extra configuration needed.
-
Hello all,
At this time all issues resolved. Thanks for the pointer from @SteeMan
I am running from SD Card.
Image Used: Armbian_20.10_Arm-64_focal_current_5.9.0_desktop.img.xz
Uboot: u-boot-s905x2-s922 > u-boot.ext
dtb: /dtb/amlogic/meson-sm1-sei610.dtb - BlueTooth, HDMI Audio, WIFI Works, Ethernet does NOT work.
To get wifi working:
```
sudo mv /lib/firmware/brcm/brcmfmac4330-sdio.txt /lib/firmware/brcm/brcmfmac4330-sdio.txt.old
sudo ln -s /lib/firmware/brcm/brcmfmac-ap6330-sdio.txt /lib/firmware/brcm/brcmfmac4330-sdio.txt
```Additionally I have tested this dtb: meson-sm1-sei610-x96maxplus.dtb. Found from this below link.
BlueTooth, HDMI Audio, WIFI and Ethernet too work.
Admin you can mark this thread as SOLVED.
Thank you and kind regards
Hannah
-
-
Hello again:
Latest dmesg:
Issue: NO HDMI Audio
I now removed the pulseaudio and install alsa. I have followed this guide:
Commands run:
```
Remove pulseaudio
hannah@tx3:~$ sudo killall pulseaudio
hannah@tx3:~$ sudo apt-get purge pulseaudio pulseaudio-utils pavumeter pavucontrol
hannah@tx3:~$ sudo apt autoremoveInstall alsa
hannah@tx3:~$ sudo apt-get install alsa-base alsa-tools alsa-tools-gui alsa-utils alsa-oss alsamixergui libalsaplayer0
Reading package lists... Done
Building dependency tree
Reading state information... Done
alsa-utils is already the newest version (1.2.2-1ubuntu2).
The following additional packages will be installed:
libfltk1.1 linux-sound-base
Suggested packages:
apmd oss-compat
The following NEW packages will be installed:
alsa-base alsa-oss alsa-tools alsa-tools-gui alsamixergui libalsaplayer0 libfltk1.1 linux-sound-base```
Clearly Sound is NOT working as alsa cannot find a sound card.
from dmesg:
```
[ 4.385344] kernel: ALSA device list:
[ 4.388320] kernel: No soundcards found.
```
Any help appreciated.
Kind regards
Hannah
-
Hello again,
Is there a way to get AUDIO over HDMI work in this box, please?
Thank you in advance.
Regards
Hannah
-
Hello,
dmesg output here:
Re: NO Sound, I see this message in the dmesg:
root@tx3:/var/log# dmesg | grep sound -B1
[ 4.375254] ALSA device list:
[ 4.378276] No soundcards found.Re: NO Bluetooth, I try following:
```
root@tx3:/var/log# dmesg | grep Found
[ 8.872902] systemd[1]: Found device /dev/ttyS2.
[ 8.944830] systemd[1]: Found device /dev/ttyAML0.
[ 9.386775] systemd[1]: Found device /dev/disk/by-label/BOOT.
[ 9.612554] systemd[1]: Found device /sys/subsystem/net/devices/eth0.root@tx3:/var/log# /usr/bin/hciattach /dev/ttyS2 bcm43xx 1500000
Can't get port settings: Input/output error
Can't initialize device: Input/output error
root@tx3:/var/log# /usr/bin/hciattach /dev/ttyAML0 bcm43xx 1500000
bcm43xx_init
Initialization timed out.```
Please guide me to resolve the SOUND issue.
I am an advanced user of LINUX, so I assume I will be able to follow your instruction.
Kind regards
Hannah
-
Hello @all
I Have a Tanix TX3 Amlogic S905X3 With 4GB RAM and 32GB ROM.
It has a SP6330 Wifi / bluetooth Chip.High resolution PCB Pic: https://ibb.co/zbqW5HH
I want to get the Sound and BlueTooth Working.
I have used the Premade "Armbian_20.10_Arm-64_focal_current_5.9.0_desktop.img.xz" and Ethernet Works, Wifi Works (with small tweaks)
This link helped me to get wifi working.
Armbian Build for Nexbox A95X with AP6330.
My armbian info:
```
root@tx3:~# cat /etc/armbian-release
# PLEASE DO NOT EDIT THIS FILE
BOARD=arm-64
BOARD_NAME="ARM-64"
BOARDFAMILY=arm-64
BUILD_REPOSITORY_URL=https://github.com/150balbes/Build-Armbian.git
BUILD_REPOSITORY_COMMIT=62b8c07-dirty
DISTRIBUTION_CODENAME=focal
DISTRIBUTION_STATUS=supported
VERSION=20.10
LINUXFAMILY=arm-64
BRANCH=current
ARCH=arm64
IMAGE_TYPE=user-built
BOARD_TYPE=conf
INITRD_ARCH=arm64
KERNEL_IMAGE_TYPE=Image```
1. u-boot used:
u-boot-s905x2-s922 > u-boot.ext
2. dtb used:
```
root@tx3:/etc/firmware# cat /boot/extlinux/extlinux.conf
LABEL Armbian
LINUX /zImage
INITRD /uInitrd# aml s9xxx
FDT /dtb/amlogic/meson-g12a-x96-max.dtb
APPEND root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0```
3. To get wifi working:
```
sudo mv /lib/firmware/brcm/brcmfmac4330-sdio.txt /lib/firmware/brcm/brcmfmac4330-sdio.txt.old
sudo ln -s /lib/firmware/brcm/brcmfmac-ap6330-sdio.txt /lib/firmware/brcm/brcmfmac4330-sdio.txt
```4. Sound is NOT working via HDMI.
Steps done:
```
root@tx3:~# sound.sh
G12AX96MAX
root@tx3:~# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: G12AX96MAX [G12A-X96-MAX], device 0: fe.dai-link-0 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: G12AX96MAX [G12A-X96-MAX], device 1: fe.dai-link-1 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: G12AX96MAX [G12A-X96-MAX], device 2: fe.dai-link-2 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
```5. Bluetooth is NOT Working.
Steps done:
dmesg output filtered for bluetooth:
```
root@tx3:~# dmesg | grep -i bluetooth
[ 9.567673] Bluetooth: Core ver 2.22
[ 9.567680] Bluetooth: Starting self testing
[ 9.637375] Bluetooth: ECDH test passed in 68049 usecs
[ 9.641395] Bluetooth: SMP test passed in 3868 usecs
[ 9.641412] Bluetooth: Finished self testing
[ 9.641503] Bluetooth: HCI device and connection manager initialized
[ 9.641516] Bluetooth: HCI socket layer initialized
[ 9.641523] Bluetooth: L2CAP socket layer initialized
[ 9.641537] Bluetooth: SCO socket layer initialized
[ 9.896146] Bluetooth: HCI UART driver ver 2.3
[ 9.896155] Bluetooth: HCI UART protocol H4 registered
[ 9.896157] Bluetooth: HCI UART protocol BCSP registered
[ 9.896213] Bluetooth: HCI UART protocol LL registered
[ 9.896215] Bluetooth: HCI UART protocol ATH3K registered
[ 9.896240] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 9.896580] Bluetooth: HCI UART protocol Intel registered
[ 9.897208] Bluetooth: HCI UART protocol Broadcom registered
[ 9.897240] Bluetooth: HCI UART protocol QCA registered
[ 9.897243] Bluetooth: HCI UART protocol AG6XX registered
[ 9.897268] Bluetooth: HCI UART protocol Marvell registered
[ 10.257607] Bluetooth: hci0: BCM: chip id 62
[ 10.258093] Bluetooth: hci0: BCM: features 0x0f
[ 10.259825] Bluetooth: hci0: BCM4330B1
[ 10.259834] Bluetooth: hci0: BCM4330B1 (002.001.003) build 0000
[ 10.781597] Bluetooth: hci0: BCM4330B1 'brcm/BCM4330B1.hcd' Patch
[ 11.615360] Bluetooth: hci0: BCM4330B1 37.4 MHz Class 1 Ampak
[ 11.615400] Bluetooth: hci0: BCM4330B1 (002.001.003) build 0000
[ 11.616135] Bluetooth: hci0: BCM: Using default device address (43:30:b1:00:00:00)
[ 17.792428] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.792435] Bluetooth: BNEP filters: protocol multicast
[ 17.792448] Bluetooth: BNEP socket layer initialized```
root@tx3:/tmp# mkdir -p /etc/firmware
root@tx3:/etc/firmware# ln -sf /lib/firmware/brcm/BCM4330B1.hcd /etc/firmware
root@tx3:/etc/firmware# ls -l
lrwxrwxrwx 1 root root 32 Jan 6 17:10 BCM4330B1.hcd -> /lib/firmware/brcm/BCM4330B1.hcdroot@tx3:/etc/firmware# hcitool scan
Device is not available: No such deviceroot@tx3:/etc/firmware# hciconfig -a
hci0: Type: Primary Bus: UART
BD Address: 43:30:B1:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN RAW
RX bytes:2261 acl:0 sco:0 events:245 errors:0
TX bytes:54895 acl:0 sco:0 commands:245 errors:0
root@tx3:/etc/firmware# /usr/bin/hciattach /dev/ttyAML0 bcm43xx 1500000
bcm43xx_init
Initialization timed outroot@tx3:/etc/firmware# hciattach -l | grep bcm
bcm2035 0x0a5c,0x2035
bcm43xx 0x0000,0x0000Kindly guide me here.
Regards
Hannah
-
-
Hello All,
May I please get some help here?
Thank you
Hannah
-
I also have thoroughly reviewed this earlier topic and still unable to resolve this WIFI issue. Please assist.
```
Armbian on S905W TVBOX (COOLEME / W95T )
https://forum.armbian.com/topic/6849-armbian-on-s905w-tvbox-cooleme-w95t/```
-
Hello,
Issue: No WIFI in my TV Box
My BOX:
A95X F1 Amlogic S905W Quad core 2GB DDR3 16GB eMMC 2.4G WIFI Chip SV6051P
hxxps://www.youtube.com/watch?v=BL-bbD_X0v0
Note I have thoroughly reviewed this thread and still unable to get wifi in this box.
Here are the details:
- Image used:
https://mega.nz/folder/j9QSDQSQ#6WpasOlbZYIInfw6yo4phQ/file/78xiBbga
Image Name: Armbian_20.10_Arm-64_focal_current_5.9.0_desktop.img.xz- dtb used = meson-gxl-s905w-p281.dtb
root@arm-64:/boot/extlinux# less extlinux.conf
# aml s9xxx
FDT /dtb/amlogic/meson-gxl-s905w-p281.dtb
APPEND root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0- armbian info:
```
root@arm-64:/boot/extlinux# cat /etc/armbian-release
# PLEASE DO NOT EDIT THIS FILE
BOARD=arm-64
BOARD_NAME="ARM-64"
BOARDFAMILY=arm-64
BUILD_REPOSITORY_URL=https://github.com/150balbes/Build-Armbian.git
BUILD_REPOSITORY_COMMIT=62b8c07-dirty
DISTRIBUTION_CODENAME=focal
DISTRIBUTION_STATUS=supported
VERSION=20.10
LINUXFAMILY=arm-64
BRANCH=current
ARCH=arm64
IMAGE_TYPE=user-built
BOARD_TYPE=conf
INITRD_ARCH=arm64
KERNEL_IMAGE_TYPE=Imageroot@arm-64:/boot/extlinux# uname -a
Linux arm-64 5.9.0-arm-64 #20.10 SMP PREEMPT Wed Oct 14 12:04:42 MSK 2020 aarch64 aarch64 aarch64 GNU/Linux```
- no wlan0 interface
```
root@arm-64:~# nmcli device show | grep -i general.device
GENERAL.DEVICE: eth0
GENERAL.DEVICE: lo```
- I see ssv* files in firmware folder
```
root@arm-64:/boot/extlinux# ls -l /lib/firmware/ssv*
-rw-rw-r-- 1 root root 81176 Nov 20 19:21 /lib/firmware/ssv6051-sw.bin
-rw-rw-r-- 1 root root 2494 Nov 20 19:21 /lib/firmware/ssv6051-wifi.cfg
-rwxrwxr-x 1 root root 39808 Nov 20 19:21 /lib/firmware/ssv6x5x-sw.bin
-rwxrwxr-x 1 root root 3373 Nov 20 19:21 /lib/firmware/ssv6x5x-wifi.cfg
root@arm-64:/boot/extlinux# ls -l /usr/lib/firmware/ssv*
-rw-rw-r-- 1 root root 81176 Nov 20 19:21 /usr/lib/firmware/ssv6051-sw.bin
-rw-rw-r-- 1 root root 2494 Nov 20 19:21 /usr/lib/firmware/ssv6051-wifi.cfg
-rwxrwxr-x 1 root root 39808 Nov 20 19:21 /usr/lib/firmware/ssv6x5x-sw.bin
-rwxrwxr-x 1 root root 3373 Nov 20 19:21 /usr/lib/firmware/ssv6x5x-wifi.cfg```
- I created this file ssv6051.conf
```
root@arm-64:/etc/modprobe.d# cat ssv6051.conf
options ssv6051 stacfgpath=/lib/firmware/ssv6051-wifi.cfg```
At this time I do not see any wlan0 interface and thus WIFI is NOT available.
Kindly assist and guide me.
Regards
Hannah
Armbian for Tanix TX3 Amlogic S905X3 with SP6330 WiFi/Bluetooth module
in Amlogic CPU Boxes
Posted
Hello,
I find that youtube playback video is very choppy.
Is it possible to enable Hardware Decoding, please?
If yes then how please.
Regards in advance
Hannah