Jump to content

maka

Members
 View Profile  See their activity

  • Posts

    123

  • Joined

  • Last visited

 Content Type 

Everything posted by maka

  1. maka
    It seems that you know about all hardware in the arm world. That's very good to help. I know all the rk3566 boxes won't work but let the lucky guys have their happy time, the first second when kernel shows its log. Do you know something about ethernet icplus Ip1001M on rockchip?
  2. maka
    3566-box-demo.dts has reached 6.2 kernel. Time to fly !!!
  3. maka
    Sorry, device too slow and doubled message.
  4. maka
    There are two Linux images for X96 X6 this month !!!
  5. maka
    Thanks for explaining your thoughts and let forget about nonsenses. I think someone can reverse his dtb making a comparison with the X96 X6 one. Current dtb is more simple but this work is always difficult and not for everyone. The problem is that nowadays there is little sharing about findings.
  6. maka
    Can you explain me the other non senses? There is no real pmic in the tvbox. I have to explain you the meaning of Phantom?
  7. maka
    Has anyone checked minimyth2 x96_x6 dtb? This is a fully working dtb for edge mainline kernel. I think is a rebuild of an SBC dtb where you need a lot of deprecated nodes deletions and the addition of a Phantom pmic20 node. Works well but its not a compiled one but a "Frankenstein" and runs cool. Maybe dangerous for some bosses!
  8. maka
    I think you can' t run klipper without gpio or can you?
  9. maka
    I prefer to use a usb drive and you can boot from It. This way you get 150 MB/s instead of 20 MB/s and you can feel your box like a Desktop PC.
  10. maka
    Look here
  11. maka
    I can tell you this box works. You can use u200 dtb but there is a better one in the forum. I have not used the new builds so follow Steeman's advices. I will follow to help.
  12. maka
    Genlekt Your problem is that the kernel cannot make a clean reboot and not the booting hardware. This is a usual trouble difficult to repair. A software change is the best solution but maybe none of your choices will work fine on this.
  13. maka
    If you get black screen with usb stick that means the board is booting but i'm afraid you need a compatible dtb file and is not easy to find one. U200 is the first device i would try.
  14. maka
    I can confirm that rk3566 is fully supported from 6.0 The patch is from Piotr Oniszczuk. Will see a box- demo device tree in mainline kernel? I have seen a distro kernel supporting a rk3566 TV box but this has not been reported to users.
  15. maka
    It seems to me that you have not flashed Linux uboot to emmc so booting from there is not working. Booting from sd card is not a bad solution though.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines

  I accept