MR01

Thanks, it's working well.
Subnet should be the same.
Now if only router can eat it in some mode (DHCP or wired repeater) to make it good Wi-Fi again! 😀

I got the ethernet patch to work. You can find them here. Use the latest 6.7.9 kernel images.
 
https://armdev.pixeldrift.net/transpeed/8k618-t/

@MR01 that 5.19.15 version was an experimental version; I compiled it without the extra wifi drivers because they were causing compilation issues. If you need something "stable" you should stay stick with the community version available on github which is updated regularly and prefer the "current" kernel flavour in place of edge.

@jock My Hero!

 

5.15 ~ 5.18 fells laggy
this 5.19 from @jock needs to be the standart

H96 MAX V12 RK3318 4gb/64gb Board v1.4
Desktop 1.3ghz verry responsive and also fix HDMI 4K display problems
LOG: http://ix.io/4gJ6
GeekBench: https://browser.geekbench.com/v5/cpu/18845814
 

@MR01 It should work as usual, that part never changed and the boot priority is always sdcard -> USB -> eMMC. I don't remember if there were minor or major bugs in that part in the past. Perhaps you can try to upgrade the bootloader with apt update && apt install linux-u-boot-rk322x-box-current, but usually it is best to upgrade bootloader and kernel together, so I don't suggest to do that.
 
You can also try to boot multitool from USB stick, but the best way to do experiments is to burn an armbian image onto sdcard or USB stick so you don't touch the installed system. Of course remember to decompress the image first, if your image writer does not so automatically.

Lima driver for 3D is active and working pretty fine since a long time, the only reason it was disabled for X.org was the slower performances in desktop usage due to missing "optimizations" in modesetting X.org driver.
This causes buffers being moved back and forth and thus degraded performance but, as you confirm, 3D is enabled for X.org too.
 
For any other usage unrelated to X.org (including Wayland/Weston, Kodi, OpenGL games, ...) Lima driver and 3D acceleration have always been available.
 

@awawa@markst I found out how POWEROFF the RED led of SPIDF

 
echo 1 > /sys/class/leds/working/brightness  
Strange as it can be 1 = OFF and 0 = ON

@jock Grazie ancora per tutto quello che fai!! 

I made a guide after resolving the problem on my own after many not working guides.