Efe Çetin
-
Posts
121 -
Joined
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Everything posted by Efe Çetin
-
@DroZDI which image did you download
-
It's interesting. I'll check it out to see what's missing
-
You need something like https://github.com/armbian/build/blob/main/patch/kernel/rockchip-rk3588-edge/dt/rk3588s-orangepi-5b.dts#L32 to enable it on mainline. I don't know the situation because of i don't have ap6275p module for opi5 but it works with Khadas edge 2. And we have an overlay for opi5 in 6.1 https://github.com/armbian/linux-rockchip/blob/rk-5.10-rkr6/arch/arm64/boot/dts/rockchip/overlay/orangepi-5-ap6275p.dts
-
You should download it from here https://redirect.armbian.com/orangepi5-plus/archive/
-
Install armbian-firmware-full
-
Packages are built daily, not after every change on main. The current package on armbian beta repo was built on 8:22 11 April. The fix got merged after this build. If you want to try the fix, you can build package using Armbian build system
-
It was just got merged recently. Wait for 406 or 407 to get the fix.
-
hi @BatVanko would you like to try https://github.com/armbian/build/pull/6486?
-
This PR should fix USBC on OPi5 -> https://github.com/armbian/build/pull/6485
-
Unfortunately opi5 is not near me and can't make any test right now. I'll try to find what's wrong with usbc on 6.8 when i find a chance to try.
-
You can add it like https://github.com/armbian/build/blob/main/patch/kernel/rockchip-rk3588-edge/board-khadas-edge2-add-nodes.patch#L1347 I suppose you don't need to make any change since 5b and edge2 uses the same pcie phy
-
OrangePi 5 Plus - rtc hym8563 - irq issue
Efe Çetin replied to Marco Schirrmeister's topic in Orange Pi 5 Plus
@Marco Schirrmeister can you send a PR to armbian to add your patch? -
Check here
-
I think you use opi5 image instead of opi5+. You have to read description properly
-
@octal8 which image did you download
-
Armbian Mantic XFCE desktop 7 dec WITH Hdmi desktop
Efe Çetin replied to Gullik's topic in Orange Pi 5
Vertical USB2 and type-c is not working yet -
1- HDMI is pretty experimental. 2- Can you send lsusb output 3- Yeah it's a known issue about edge kernel. I suppose it's related to cpufreq @adr3nal1n27
-
What Works: - USB2 and USB3 - PCIe2 - GMAC - eMMC on HS200 mode - Cpufreq - User and maskrom buttons Dmesg Output: https://paste.armbian.com/onelomofit You can download them from Rolling releases section on https://www.armbian.com/nanopi-r6s/ page. Images include devicetrees for R6S and R6C. If you have R6C, you must change the devicetree from armbianEnv.txt.
-
@robnielsen yes it has the orange pi 5 dtb, you can migrate
-
I am not able to reproduce it
-
Orange Pi 5 Plus - Dual boot - is possible ?
Efe Çetin replied to costel's topic in Orange Pi 5 Plus
Yes dual boot is possible. You can use uboot to load EFI files and then you can use a bootloader like grub, systemdboot. Btw you can use https://github.com/edk2-porting/edk2-rk3588 too. It works well with 5.10 legacy kernel. -
OrangePi 5 Plus bookworm images have no video or network
Efe Çetin replied to rvandegrift's topic in Orange Pi 5 Plus
You need to download it from https://redirect.armbian.com/orangepi5-plus/archive/ -
@buzzfab i implemented 6.5-rc1 support for opi5 in the past. I'll also add support for opi5+ this week or next week Note: It's experimental, most thing is not mainlined yet.
-
Can you debug it with usb ttl if you have? Looks like the overlay is not loaded
-
Fixed with https://github.com/armbian/linux-rockchip/pull/72
