Dbosco

@royk thanks for the build, still i didn't test it but i performed some new tests, using the dist from Joshua Riek as Ubuntu is ready, with GPU, and the Kernel is already patched And same problem with Nexus, but i was able to build Omega and is working fine if in System -> Video i select my TV on not the default option (dunno why), after that i can change the resolution to 1080p and everything is working fine, HDR10, x265, x264, 4k.. all good although when i start a video the change of resolution is a bit slow and in the Kodi logs i can see an issue with the EDID: 2024-04-22 10:53:53.119 T:2038 error <general>: [display-info] Error parsing EDID: 2024-04-22 10:53:53.119 T:2038 error <general>: [display-info] ---------------------------------------------- 2024-04-22 10:53:53.119 T:2038 error <general>: [display-info] Block 1, CTA-861 Extension Block: 2024-04-22 10:53:53.119 T:2038 error <general>: [display-info] Colorimetry Data Block: Reserved bits MD0-MD3 must be 0. 2024-04-22 10:53:53.119 T:2038 error <general>: [display-info] 2024-04-22 10:53:53.119 T:2038 error <general>: [display-info] ---------------------------------------------- after these messages in can see in the Kodi log that is able to load all the resolutions profiles Don't know if there is a fix for the EDID After installing Omega it create automatically the GBM profile, using that Kodi works, meanwhile if I'm using yours with the FFMPEG_RKMPP_DEC_OPT="afbc=on" option the video is not showing and Kodi crash cat /usr/local/share/wayland-sessions/kodi-gbm.desktop [Desktop Entry] Name=Kodi on GBM Comment=This session will start Kodi media center Exec=kodi-standalone --windowing=gbm TryExec=kodi-standalone Type=Application Keywords=audio;video;media;center;tv;movies;series;songs;remote; Icon=kodi Also, there was an issue with the python IMP module not found that caused some crashes, and addon probs. finally resolved installing python3-zombie-imp

@royk thanks again for your help I've followed the step to build ffmpeg, mpp and rga, but after that i cannot build kodi anymore, and I'm unable to understand where the error is, i suppose that can be related with the configure option of ffmpeg. i've added these ones: ./configure --prefix=/usr --enable-gpl --enable-gnutls --enable-libass --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libdav1d --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-nonfree --enable-gpl --enable-libopus --enable-version3 --enable-libdrm --enable-rkmpp --enable-rkrga and this are the results when i grep from ffmpeg V..... av1_rkmpp Rockchip MPP (Media Process Platform) AV1 decoder (codec av1) V..... h263_rkmpp Rockchip MPP (Media Process Platform) H263 decoder (codec h263) V..... h264_rkmpp Rockchip MPP (Media Process Platform) H264 decoder (codec h264) V..... hevc_rkmpp Rockchip MPP (Media Process Platform) HEVC decoder (codec hevc) V..... mpeg1_rkmpp Rockchip MPP (Media Process Platform) MPEG1VIDEO decoder (codec mpeg1video) V..... mpeg2_rkmpp Rockchip MPP (Media Process Platform) MPEG2VIDEO decoder (codec mpeg2video) V..... mpeg4_rkmpp Rockchip MPP (Media Process Platform) MPEG4 decoder (codec mpeg4) V..... vp8_rkmpp Rockchip MPP (Media Process Platform) VP8 decoder (codec vp8) V..... vp9_rkmpp Rockchip MPP (Media Process Platform) VP9 decoder (codec vp9) V..... h264_rkmpp Rockchip MPP (Media Process Platform) H264 encoder (codec h264) V..... hevc_rkmpp Rockchip MPP (Media Process Platform) HEVC encoder (codec hevc) V..... mjpeg_rkmpp Rockchip MPP (Media Process Platform) MJPEG encoder (codec mjpeg) ... overlay_rkrga VV->V Rockchip RGA (2D Raster Graphic Acceleration) video compositor ... scale_rkrga V->V Rockchip RGA (2D Raster Graphic Acceleration) video resizer and format converter ... vpp_rkrga V->V Rockchip RGA (2D Raster Graphic Acceleration) video post-process (scale/crop/transpose) and i've also started from scratch with a different build "Armbian_24.5.0-trunk.434_Orangepi5_noble_vendor_6.1.43_xfce_desktop" installed panfork, ubuntu, updated the kernel with patches, compiled ffmpeg, mpp and rga, and as last kodi could be related with a ffmpeg bad configuration? thanks

thanks @royk now Kodi starts unfortunately when i'm playing a file the video is not showing, and I can listen the audio in the background. same with sudo systemctl stop gdm3 -> env FFMPEG_RKMPP_DEC_OPT="afbc=on" kodi --windowing=gbm --audio-backend=alsa to recap: build: Armbian_24.2.4_Orangepi5_jammy_vendor_6.1.43_kde-neon-amazingfated_desktop patched with 0001-rga3_uncompact_fix.patch and 0002-vop2_rbga2101010_capability_fix.patch Kodi Nexus GBM+GLES, with patches 0001-windowing-gbm-Dynamic-plane-selection.patch and 0002-VideoLayerBridgeDRMPRIME-Use-crop-fields-to-render-t.patch tested with GDM3 and SDDM dunno what i'm doing wrong

@royk after applying the patches i've tried to build Kodi with severals of the configurations available and always with GLES, but there are some issues: cmake ../kodi -DCMAKE_INSTALL_PREFIX=/usr/local -DCORE_PLATFORM_NAME="x11 wayland gbm" -DAPP_RENDER_SYSTEM=gles it start Kodi but with X11 cmake ../kodi -DCMAKE_INSTALL_PREFIX=/usr/local -DCORE_PLATFORM_NAME=gbm -DAPP_RENDER_SYSTEM=gles and cmake ../kodi -DCMAKE_INSTALL_PREFIX=/usr/local -DCORE_PLATFORM_NAME=wayland -DAPP_RENDER_SYSTEM=gles Kodi doesn't starts, it just return to the login page for all the cases the session name is "Kodi" and not "Kodi-Wayland" as was before with GDM3 and previous kernel. ls /usr/share/xsessions plasmax11.desktop ls /usr/share/wayland-sessions plasma.desktop any idea? thanks!

that's great Royk! so i can build Kodi following the official github guide, with GBM and GLES + patches 0001-windowing-gbm-Dynamic-plane-selection.patch / 0002-VideoLayerBridgeDRMPRIME-Use-crop-fields-to-render-t.patch ? or should i use a different configuration? thanks!

Hi! i've tried to apply the patch but i still have a black screen, maybe i did something wrong build: Armbian_24.2.4_Orangepi5_jammy_vendor_6.1.43_kde-neon-amazingfated_desktop After armbian wizard i did: apt update & upgrade reboot apt install kodi kodi-repository-kodi reboot start Kodi in GBM i've tested a video file, and black screen so i've quit from Kodi and i did the procedure below to apply the patches 0001-rga3_uncompact_fix.patch / 0002-vop2_rbga2101010_capability_fix.patch: % git clone -b rk-6.1-rkr1 https://github.com/amazingfate/linux-rockchip.git % cd linux-rockchip % wget https://github.com/hbiyik/ffmpeg-rockchip/wiki/patches/rockchip-kernel/0001-rga3_uncompact_fix.patch % wget https://github.com/hbiyik/ffmpeg-rockchip/wiki/patches/rockchip-kernel/0002-vop2_rgba2101010_capability_fix.patch % patch -p1 < 0001-rga3_uncompact_fix.patch patching file drivers/video/rockchip/rga3/rga3_reg_info.c Reversed (or previously applied) patch detected! Assume -R? [n] y % patch -p1 < 0002-vop2_rgba2101010_capability_fix.patch patching file drivers/gpu/drm/rockchip/rockchip_vop2_reg.c % make CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 rockchip_linux_defconfig % make KBUILD_IMAGE="arch/arm64/boot/Image" CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 -j "$(nproc)" bindeb-pkg Results: dpkg-deb: building package 'linux-libc-dev' in '../linux-libc-dev_6.1.43-1_arm64.deb'. dpkg-deb: building package 'linux-image-6.1.43' in '../linux-image-6.1.43_6.1.43-1_arm64.deb'. dpkg-deb: building package 'linux-image-6.1.43-dbg' in '../linux-image-6.1.43-dbg_6.1.43-1_arm64.deb'. dpkg-genbuildinfo --build=binary -O../linux-upstream_6.1.43-1_arm64.buildinfo dpkg-genchanges --build=binary -O../linux-upstream_6.1.43-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) Then I did % cd .. % sudo dpkg -i *.deb Results: Selecting previously unselected package linux-headers-6.1.43. (Reading database ... 183026 files and directories currently installed.) Preparing to unpack linux-headers-6.1.43_6.1.43-1_arm64.deb ... Unpacking linux-headers-6.1.43 (6.1.43-1) ... Selecting previously unselected package linux-image-6.1.43. Preparing to unpack linux-image-6.1.43_6.1.43-1_arm64.deb ... Unpacking linux-image-6.1.43 (6.1.43-1) ... Selecting previously unselected package linux-image-6.1.43-dbg. Preparing to unpack linux-image-6.1.43-dbg_6.1.43-1_arm64.deb ... Unpacking linux-image-6.1.43-dbg (6.1.43-1) ... Preparing to unpack linux-libc-dev_6.1.43-1_arm64.deb ... Unpacking linux-libc-dev:arm64 (6.1.43-1) over (5.15.0-102.112) ... Setting up linux-headers-6.1.43 (6.1.43-1) ... Setting up linux-image-6.1.43 (6.1.43-1) ... * dkms: running auto installation service for kernel 6.1.43 Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area... make -j8 KERNELRELEASE=6.1.43 KERNEL_DIR=/lib/modules/6.1.43/build all... cleaning build area... v4l2loopback.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/6.1.43/updates/dkms/ depmod... [ OK ] update-initramfs: Generating /boot/initrd.img-6.1.43 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8156b-2.fw for built-in driver r8152 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8156a-2.fw for built-in driver r8152 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8153c-1.fw for built-in driver r8152 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8153a-4.fw for built-in driver r8152 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8153a-2.fw for built-in driver r8152 W: Possible missing firmware /lib/firmware/keyspan/usa49wlc.fw for built-in driver keyspan W: Possible missing firmware /lib/firmware/keyspan/usa49w.fw for built-in driver keyspan W: Possible missing firmware /lib/firmware/keyspan/usa19w.fw for built-in driver keyspan W: Possible missing firmware /lib/firmware/keyspan/usa18x.fw for built-in driver keyspan W: Possible missing firmware /lib/firmware/keyspan/usa19qw.fw for built-in driver keyspan W: Possible missing firmware /lib/firmware/keyspan/mpr.fw for built-in driver keyspan W: Possible missing firmware /lib/firmware/keyspan/usa19qi.fw for built-in driver keyspan W: Possible missing firmware /lib/firmware/keyspan/usa19.fw for built-in driver keyspan W: Possible missing firmware /lib/firmware/keyspan/usa28xb.fw for built-in driver keyspan W: Possible missing firmware /lib/firmware/keyspan/usa28xa.fw for built-in driver keyspan W: Possible missing firmware /lib/firmware/keyspan/usa28x.fw for built-in driver keyspan W: Possible missing firmware /lib/firmware/keyspan/usa28.fw for built-in driver keyspan W: Possible missing firmware /lib/firmware/bfubase.frm for built-in driver bfusb W: Possible missing firmware /lib/firmware/intel/ibt-12-16.ddc for built-in driver btintel W: Possible missing firmware /lib/firmware/intel/ibt-12-16.sfi for built-in driver btintel W: Possible missing firmware /lib/firmware/intel/ibt-11-5.ddc for built-in driver btintel W: Possible missing firmware /lib/firmware/intel/ibt-11-5.sfi for built-in driver btintel W: Possible missing firmware /lib/firmware/mrvl/sdsd8997_combo_v4.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8987_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sdsd8977_combo_v2.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8897_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8887_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8797_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8787_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8688.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8688_helper.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/rtl_bt/rtl8851bu_config.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8851bu_fw.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8852cu_config.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8852cu_fw.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8852bu_config.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8852bu_fw.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8852au_config.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8852au_fw.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8821a_config.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8821a_fw.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8761a_config.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8761a_fw.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8723a_fw.bin for built-in driver btrtl update-initramfs: Armbian: Converting to u-boot format: /boot/uInitrd-6.1.43 Image Name: uInitrd Created: Tue Apr 16 13:06:04 2024 Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 15405164 Bytes = 15044.11 KiB = 14.69 MiB Load Address: 00000000 Entry Point: 00000000 update-initramfs: Armbian: Symlinking /boot/uInitrd-6.1.43 to /boot/uInitrd ln: failed to create symbolic link '/boot/uInitrd': Operation not permitted update-initramfs: Symlink failed, moving /boot/uInitrd-6.1.43 to /boot/uInitrd renamed '/boot/uInitrd-6.1.43' -> '/boot/uInitrd' update-initramfs: Armbian: done. Free space after deleting the package linux-image-6.1.43 in /boot: 67.7M Setting up linux-image-6.1.43-dbg (6.1.43-1) ... Setting up linux-libc-dev:arm64 (6.1.43-1) ... % reboot Tested Kodi again, and black screen Any suggestion? Thanks!!

Hi! I've tested it as well, and I was able to access the desktop after an apt update & upgrade from SSH, try that Enviado desde mi SM-G991B mediante Tapatalk

Hi! i've tested Kodi in the Armbian_24.2.2_Orangepi5_jammy_vendor_6.1.43_minimal, and i've a black screen under GBM Pressing the key "o" i can see that is HW decoded, and the audio come out then, following the guide https://github.com/hbiyik/ffmpeg-rockchip/wiki/Rendering, i've stopped the desktop environment with sudo service gdm stop and started kodi with FFMPEG_RKMPP_DEC_OPT="afbc=on" kodi --windowing=gbm --audio-backend=alsa, but nothing changed I've tried with direct to plane and EGL thanks

@royk and it worked! OSD is back, tested some medias x264/5 and all good @PajPaj i ran a full system update and tested an HDR video and it works fine, compare my system info screenshot with your system to see if there is something different and understand how can be solved

@royk this is what i see

Hi @royk, thanks so much for the patch! i've performed 2 tests: Armbian_23.8.1_Orangepi5_jammy_legacy_5.10.160_gnome_desktop Kodi Nexus with x264 & x265 media: the OSD works now, but when is opened the screen goes black, and the image reappear when is closed back. For some medias the screen is always black Armbian_23.08.420-monka_orangepi5_jammy_legacy_5.10.160_gnome-desktop-AFM-1.6 with a fresh install without apt update, the OS come with Kodi Matrix and works with both x264 and x265. After updating the same appears as for Armbian_23.8.1_Orangepi5_jammy_legacy_5.10.160_gnome_desktop I'll test more and let you know

Hi, I'm trying to create a new SD to test the latest Armbian OS, Kodi can start in Wayland, the correct configuration is applied for DRM, but it crash after the request to play a video. Tested with x264 and x265. It happens with DRM off as well and I tried to check the Kodi crash log but I don't understand where the problem is. What do you think? The release is: Armbian 23.8.0-trunk.270 Jammy with Linux 5.10.160-legacy-rk35xx Also tested severals releases with the kernel 6.5-rc5 but the HDMI video output is not working Thanks!! kodi_crashlog-20230826_100637.log

thanks @bottlelid! it worked

Thanks! Will try it and let you know Enviado desde mi iPhone utilizando Tapatalk

Hi, in my case I've the following error: The following packages have unmet dependencies: kodi-inputstream-adaptive : Depends: kodi-api-inputstream (< 3.1.0) I tried to reinstall kodi-api-inputstream: " sudo apt-get install --reinstall kodi-api-inputstream Reading package lists... Done Building dependency tree... Done Reading state information... Done Note, selecting 'kodi' instead of 'kodi-api-inputstream' 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded. Need to get 38.4 kB of archives. After this operation, 0 B of additional disk space will be used. Get:1 https://ppa.launchpadcontent.net/liujianfeng1994/rockchip-multimedia/ubuntu jammy/main arm64 kodi arm64 2:20.2+dfsg-4+gles [38.4 kB] Fetched 38.4 kB in 0s (120 kB/s) (Reading database ... 163812 files and directories currently installed.) Preparing to unpack .../kodi_2%3a20.2+dfsg-4+gles_arm64.deb ... Unpacking kodi (2:20.2+dfsg-4+gles) over (2:20.2+dfsg-4+gles) ... Setting up kodi (2:20.2+dfsg-4+gles) ... Processing triggers for desktop-file-utils (0.26-1ubuntu3) ... Processing triggers for gnome-menus (3.36.0-1ubuntu3) ... Processing triggers for man-db (2.10.2-1) ... Processing triggers for mailcap (3.70+nmu1ubuntu1) ... " Any idea on how to solve it? Distribution: Armbian 23.02.2 Jammy Thanks!

@royk Tried everything and for some reason now is working with the hdmi audio extractor. OPI to TV no way to do it There is probably some incompatibility issue between the OS and my TV, but at least now is ok. More cables and stuff but with Dolby and happy Thanks again for your time Enviado desde mi MI 8 SE mediante Tapatalk

@royk Hi tried with Alsa, same issue If can be useful i'm attaching logs and a screenshot from Kodi when playing Thanks! kodi.log

@Alex D@dkg not sure if can help, but i saw on RebornOS more passtrough options there, i cannot remember if TrueHD was available

@royk i didn't remove 90-pulseaudio.rules, but now is back in place What is in /etc/udev/rules.d/11-rockchip-multimedia.rules KERNEL=="mpp_service", MODE="0660", GROUP="video" KERNEL=="rga", MODE="0660", GROUP="video" KERNEL=="system-dma32", MODE="0666", GROUP="video" KERNEL=="system-uncached-dma32", MODE="0666", GROUP="video" RUN+="/usr/bin/chmod a+rw /dev/dma_heap" HDMI-OUT and card alias were correctly added As suggested I've disabled other devices, and kept only HDMI did this " sudo alsa force-reload && pulseaudio -k && pulseadaudio -D " and also a reboot Unfortunately the issue persists as example I've attached a recording of the audio output that i've when i'm trying to play ac3 7 abr. 17.08​.aac

@royk sudo rm /etc/udev/rules.d/90-naming-audios.rules rm: cannot remove '/etc/udev/rules.d/90-naming-audios.rules': No such file or directory rules.d:% ls 10-wifi-disable-powermanagement.rules 11-rockchip-multimedia.rules 50-usb-realtek-net.rules 99-rk-device-permissions.rules I've looked here: /usr/lib/udev/rules.d and found: 90-alsa-restore.rules 90-console-setup.rules 90-libinput-fuzz-override.rules 90-nm-thunderbolt.rules 90-pipewire-alsa.rules 90-pulseaudio.rules and tried to remove only this one 90-pulseaudio.rules, but no luck I'm only trying to get AC3 and AAC is there others folders with rules.d ? will check this one IEC958_SUBFRAME_LE and let you know Thanks again for your time and support

@royk you're right i didn't uninstall correctly the previous version, only purge without --auto-remove. Now working! Thank you! I've another issue in Kodi regard passtrough, unfortunately for me is not working properly. I've tried the config of this guide, Martivo with ansible, Joshua Riek, the following one (adding DP port as well) And unfortunately the audio output is always distorted, with noises, like when you send an incompatible digital format to TV or AV The official Orange android version works as expected, also my previous setup with Odroid C4. So it seems that there is some config that is incompatible with my TV (TCL 2022) OPI5 -> TV -> Sony sound bar (ARC) I've tried unplugging Sony sound bar, but no luck In internet I've found several guides and tips, modifying alsa daemon, changing sample and other stuff. Also tried to use only Alsa disabling Pulse, same behavior Tested with Kodi, VLC, various media files, all distros available for OPI5 Various HDMI cables HDMI audio extractor Do you have any suggestion? Thanks

@Alex D thanks, i've tried that, and this is the error: make -j8 Scanning dependencies of target cec_swig_compilation [ 4%] Building CXX object src/libcec/CMakeFiles/cec.dir/CECClient.cpp.o [ 4%] Swig compile libcec.i for python [ 9%] Building CXX object src/libcec/CMakeFiles/cec.dir/adapter/RPi/RPiCECAdapterCommunication.cpp.o [ 9%] Building CXX object src/libcec/CMakeFiles/cec.dir/LibCECC.cpp.o [ 13%] Building CXX object src/libcec/CMakeFiles/cec.dir/LibCEC.cpp.o [ 13%] Building CXX object src/libcec/CMakeFiles/cec.dir/CECProcessor.cpp.o [ 15%] Building CXX object src/libcec/CMakeFiles/cec.dir/adapter/RPi/RPiCECAdapterMessageQueue.cpp.o [ 18%] Building CXX object src/libcec/CMakeFiles/cec.dir/adapter/RPi/RPiCECAdapterDetection.cpp.o /home/dani/libcec/src/libcec/adapter/RPi/RPiCECAdapterDetection.cpp:40:10: fatal error: interface/vmcs_host/vc_cecservice.h: No such file or directory 40 | #include <interface/vmcs_host/vc_cecservice.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[2]: *** [src/libcec/CMakeFiles/cec.dir/build.make:132: src/libcec/CMakeFiles/cec.dir/adapter/RPi/RPiCECAdapterDetection.cpp.o] Error 1 make[2]: *** Waiting for unfinished jobs.... In file included from /home/dani/libcec/src/libcec/adapter/RPi/RPiCECAdapterCommunication.cpp:37: /home/dani/libcec/src/libcec/adapter/RPi/RPiCECAdapterCommunication.h:45:10: fatal error: interface/vmcs_host/vc_cecservice.h: No such file or directory 45 | #include <interface/vmcs_host/vc_cecservice.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[2]: *** [src/libcec/CMakeFiles/cec.dir/build.make:146: src/libcec/CMakeFiles/cec.dir/adapter/RPi/RPiCECAdapterCommunication.cpp.o] Error 1 In file included from /home/dani/libcec/src/libcec/adapter/RPi/RPiCECAdapterMessageQueue.cpp:37: /home/dani/libcec/src/libcec/adapter/RPi/RPiCECAdapterMessageQueue.h:41:10: fatal error: interface/vmcs_host/vc_cecservice.h: No such file or directory 41 | #include <interface/vmcs_host/vc_cecservice.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[2]: *** [src/libcec/CMakeFiles/cec.dir/build.make:160: src/libcec/CMakeFiles/cec.dir/adapter/RPi/RPiCECAdapterMessageQueue.cpp.o] Error 1 [ 18%] Built target cec_swig_compilation make[1]: *** [CMakeFiles/Makefile2:261: src/libcec/CMakeFiles/cec.dir/all] Error 2 make: *** [Makefile:136: all] Error 2 Thanks!

Hi! I'm interested to add CEC support in Kodi, but I'm unable to build it as I don't know how to exclude the RPI, could you tell me which is the command? Thanks! Enviado desde mi MI 8 SE mediante Tapatalk

Thanks for your feedback Efe