-
Posts
4 -
Joined
-
Last visited
Reputation Activity
-
gTs2 got a reaction from wildcat_paris in Cubieboard 2 - errors booting Armbian from SD card
the only things left were either a wrong write or a wrong image
dd img to sdcard under linux
dd pipe to sha256sum, wrong
dd img to sdcard under windows, dd pipe it to sha256sum, the same wrong value
used win32diskimager, sha256 is correct, sdcard boots, i left it alone for for now to do its work
either i don't know how to use dd maybe some of the weird options like notrunc or whatever, or dd is dumb
now i'm going to play some obduction to calm down, i am angry at myself because i was almost certain your image was wrong... after all how could you develop for a board you don't even have? But I had more trust in you (because you are people) than i have in computers (because... computers...) and thankfully i insisted on checking as much as i could before i started pointing fingers
thank you for your work and if you need anything tested on a cb2just ask, i'm handy with both hw/sw
-
gTs2 reacted to zador.blood.stained in Cubieboard 2 - errors booting Armbian from SD card
I downloaded and checked Armbian_5.20_Cubieboard2_Ubuntu_xenial_4.7.3.img, and it has SPL signature in place. If your board fails to detect it, it is most likely a problem on your side - SD card, card reader, power supply or board itself. Or you are writing the image wrong.
-
gTs2 reacted to Igor in Cubieboard 2 - errors booting Armbian from SD card
I try to boot this image on Cubietruck and it boots fine. Back in the old days we used to have one image for Cubieboard2 and Cubietruck since they are very similar.
If you use two SD cards, get third one, use windows tools ... Don't really have any better idea
http://docs.armbian.com/User-Guide_Getting-Started/#how-to-prepare-a-sd-card
-
gTs2 reacted to zador.blood.stained in Cubieboard 2 - errors booting Armbian from SD card
Unfortunately we don't have Cubieboard 2, so we can't debug booting issue on this board.
This is strange. If board boots from NAND while SD is inserted, then it means that SPL signature was not found on the card or SD failed to initialize.
So system booted from NAND detects SD card and detects partition table on it (since /dev/mmcblk0p1 is created)?