atula

Armbian_5.88_Rockpi-4b_Debian_stretch_default_4.4.180 what pin is w1 default pin ? i not find /boot/dtb/rockchip/overlay i try armbianEnv.txt overlays=w1-gpio param_w1_pin=GPIO4_D2 and root@rockpi:/# lsmod Module Size Used by w1_therm 16384 0 w1_gpio 16384 0 wire 32768 2 w1_gpio,w1_therm but nothing /sys/bus/w1/devices/

it is the same for both models https://wiki.radxa.com/Rockpi4/hardware/rockpi4#gpio

i have rockpi 4 A model without bluetooth, its possible use serial@ff180000 UART0 gpio like GPIO4_D5, (RX)

I'm studying more

WD Black 500GB, PCIe, 3400/2500 MB/s - SSD- M.2 works only Armbian_5.67_Rockpi4b_Debian_stretch_default_4.4.154_desktop_20181210-gpt.img.gz i'll test later other (Kingston 240GB A1000, PCIe NVMe, 1500/1000 MB/s -SSD) SSD disks, other armbian images not working this M.2 SSD disk Armbian_5.73.190128_Rockpi-4b_Debian_stretch_dev_4.20.0.img PCIe NVMe not work can i download Armbian_5.67_Rockpi4b_Debian_stretch_default_4.4.154_desktop_20181210-gpt.img.gz without a desktop this img?

M.2 NV SSD not work with 4.20.13.img 4.4.154 works

i2c work now fine, thank you i try find MAC

yes, in all RockPi image use the same MAC. in radxa rock it modify in "parameter" txt, raspberry also

two same addresses do not work on the same network, the other must be different (dhcp IP) "/dev/i2c-0 /dev/i2c-1 /dev/i2c-3 /dev/i2c-4" none is working

GPIO2_A7, GPIO2_B0, like raspberry or GPIO2_A0, GPIO2_A1 or ? BMP280, ds2482, ds2483 and ADS115... + i have two, rockpi4a and rockpi4b, how i repare MAC adress

w1 works "param_w1_pin=GPIO4_D5" ok how to find i2c root@rockpi:~# dmesg|grep i2c [ 1.543735] i2c /dev entries driver and root@rockpi:~# ls /dev/*i2c* /dev/i2c-0 /dev/i2c-1 /dev/i2c-3 /dev/i2c-4 i2cdetect find nothing

I ask more,,,sorry what pin is w1 default pin ? how i find it

root@rockpi:~# dmesg|grep serial [ 1.965909] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A [ 1.969249] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud = 1500000) is a 16550A [ 1.972774] ff370000.serial: ttyS1 at MMIO 0xff370000 (irq = 41, base_baud = 1500000) is a 16550A what pin is "ttyS0" ? when "okay" serial@ff1b0000 { .................................... pinctrl-0 = < 0x42 >; status = "disabled"; phandle = < 0xd9 >; network fall

Thank you very much for script, /dev/ttyS1 and /dev/ttyS2 also, two other not work I'm trying them again but two uarts is fine

rockpi 4 ARMBIAN 5.74.190202 nightly Debian GNU/Linux 9 (stretch) 4.20.0-rockchip64 could someone help me to take uart0, 1, 3. uart2 works , pin 8, 10 root@rockpi:~# ls /dev/ttyS* /dev/ttyS0 /dev/ttyS1 /dev/ttyS2 /dev/ttyS3 i dont need serial console step by step and simply

pcduino3 nano Armbian_5.31_Pcduino3nano_Debian_jessie_next_4.11.5.img cat /proc/adc2 work in ubuntu how i do in armbian? .......heaven just knows

does not work, I build own armbian jessie img step by step, just the same end result .....all works SDcard but not nand what this mean "nand header bad for ali MBR copies" its print to screen when script (nand-sata-install) do partitions is it possible that NAND is not completely blank when script do partitions?

this is my problem, what wrong, "nand header bad for ali MBR copies"

i tested also install to SSD hd, boot from nand, system sata....connection 'eth0' active.....server not found....not work Onboard Storage 4GB Flash there is H27UBG8T2CTR 32GB can not be possible that only 4GB....28GB is broken.....and with ubuntu work I'm not so smart that would know, maybe work only sdcard with jessie, bananapi3 nand and bananapiM1 sata works fine with ambian jessie, there is also rtl8211E

perhaps due to something else because the Ubuntu pcduino3b_nano_dd_1404 to work with nand I tested the desktop version Armbian_5.20_Pcduino3nano_Debian_jessie_3.4.112_desktop, eth0 connect, i see the router ip, sdcard and nand sdcard work but nand no when i flash ssh and monitor hdmi, can be seen twice fs error when partitions are made sorry for my bad english

pcduino3 nano, Armbian_5.20_Pcduino3nano_Debian_jessie_3.4.112, all works fine sdcard, when i "nand-sata-install" to nand - ifconfig is ok - systemctl status sshd -l is ok - ping google.com is ok ssh does not work apt-get update does not work what did I do wrong ?