Jump to content

teknoid

Members
  • Posts

    33
  • Joined

  • Last visited

Everything posted by teknoid

  1. no WiFi Adapter after fresh installation. usbcore.autosuspend=-1 fixes it: ___ _ _ _ ____ ____ / _ \ __| |_ __ ___ (_) __| | / ___|___ \ | | | |/ _` | '__/ _ \| |/ _` | | | __) | | |_| | (_| | | | (_) | | (_| | | |___ / __/ \___/ \__,_|_| \___/|_|\__,_| \____|_____| Welcome to Armbian 24.2.1 Bookworm with Linux 6.6.16-current-meson64 System load: 46% Up time: 0 min Memory usage: 7% of 1.82G IP: 192.168.25.252 CPU temp: 28°C Usage of /: 66% of 3.0G [ Menu-driven system configuration (beta): sudo apt update && sudo apt install armbian-config ] root@odroid:~# cat /boot/armbianEnv.txt verbosity=1 console=both overlay_prefix=meson rootdev=UUID=1cf10f1a-aa21-4ff0-875d-c59f57c87173 rootfstype=ext4 extraboardargs=fastboot noswap isolcpus=3 usbcore.autosuspend=-1 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u root@odroid:~# lsusb Bus 001 Device 007: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T Bus 001 Device 006: ID 7392:7822 Edimax Technology Co., Ltd EW-7612UAn V2 802.11n Wireless Adapter [Realtek RTL8192CU] Bus 001 Device 005: ID 05e3:0610 Genesys Logic, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  2. root@odroid:~# mount |grep mmc /dev/mmcblk1p1 on / type ext4 (ro,noatime) /dev/mmcblk0p1 on /data type ext4 (ro,noatime) root@odroid:~# reboot Failed to connect to bus: No such file or directory root@odroid:~# client_loop: send disconnect: Broken pipe hje@prime:~$ hje@prime:~$ hje@prime:~$ hje@prime:~$ hje@prime:~$ ssh root@odroid ___ _ _ _ ____ ____ / _ \ __| |_ __ ___ (_) __| | / ___|___ \ | | | |/ _` | '__/ _ \| |/ _` | | | __) | | |_| | (_| | | | (_) | | (_| | | |___ / __/ \___/ \__,_|_| \___/|_|\__,_| \____|_____| Welcome to Armbian 24.2.1 Bookworm with Linux 6.6.16-current-meson64 System load: 46% Up time: 0 min Memory usage: 7% of 1.82G IP: 192.168.25.252 CPU temp: 28°C Usage of /: 66% of 3.0G fresh installation on emmc, reboot works fine.
  3. I just tested Armbian_23.11.1_Bananapipro_bookworm_current_6.1.63.img: dd bs=8M if=Armbian_23.11.1_Bananapipro_bookworm_current_6.1.63.img of=/dev/sdc Boots without any problems, opening ssh gives me: Welcome to Armbian! Documentation: https://docs.armbian.com | Community support: https://forum.armbian.com IP address: 192.168.25.15 Create root password: ********* Repeat root password: ********* Support status: community support (looking for a dedicated maintainer) Choose default system command shell: 1) bash 2) zsh 1 Shell: BASH Creating a new user account. Press <Ctrl-C> to abort
  4. Probably it is a problem in uboot, it cannot detect any SD-Cards. Thats why uboot is searching for a TFTP server to boot from there. You can set up a TFTP Server and check if you can at least boot the kernel and see if your SD-Card is detected in the kernel.
  5. @ickam, I just tested Armbian_23.05.0-trunk_Odroidc2_bullseye_current_6.1.29_minimal.img and could not reproduce your problem. After boot please wait 2-3 mins and carefully check your DHCP Server Log. For me it works as expected: May 23 11:04:36 tron dnsmasq-dhcp[2938540]: DHCPDISCOVER(enp6s0f0) 00:1e:06:33:b5:0a May 23 11:04:36 tron dnsmasq-dhcp[2938540]: DHCPOFFER(enp6s0f0) 192.168.25.16 00:1e:06:33:b5:0a May 23 11:04:36 tron dnsmasq-dhcp[2938540]: DHCPREQUEST(enp6s0f0) 192.168.25.16 00:1e:06:33:b5:0a May 23 11:04:36 tron dnsmasq-dhcp[2938540]: abandoning lease to 00:1e:06:33:b5:0a of 192.168.25.16 May 23 11:04:36 tron dnsmasq-dhcp[2938540]: DHCPACK(enp6s0f0) 192.168.25.16 00:1e:06:33:b5:0a c2 Welcome to ARMBIAN! Documentation: https://docs.armbian.com | Community: https://forum.armbian.com IP address: 192.168.25.16 Create root password: ********* Repeat root password: ********* Shell: BASH Creating a new user account. Press <Ctrl-C> to abort
  6. Nanopi Neo Plus 2 (H5) linux-u-boot-nanopineoplus2-current_23.05.0-trunk--2022.07-Se092-P6b27-Ha9af-Vaada-B4b55_arm64.deb linux-image-current-sunxi64_23.05.0-trunk--6.1.26-Sca1c-D4008-P8596-C1438Hfe66-HK01ba-Vc222-Ba98e_arm64.deb OK, but distorted audio output over USB, I believe this came up since kernel 5.16+ and is still present in 6.x Banana Pi Pro (A20) linux-u-boot-bananapipro-current_23.05.0-trunk--2022.07-Se092-P6b27-H0429-Vaada-B4b55_armhf.deb linux-image-current-sunxi_23.05.0-trunk--6.1.26-Sca1c-D4008-P8596-C596bHfe66-HK01ba-V014b-Ba98e_armhf.deb OK Odroid C2 linux-u-boot-odroidc2-current_23.05.0-trunk--2022.01-Sd637-P6c67-H7ff5-V603e-B4b55_arm64.deb linux-image-current-meson64_23.05.0-trunk--6.1.27-Sca48-D4008-Pc5ba-C072bHfe66-HK01ba-Ve377-Ba98e_arm64.deb OK Armbian_23.05.0-trunk_Odroidc2_bullseye_current_6.1.29_minimal.img full image test: OK new build system is a very good improvement 👍
  7. Not yet noticed - I don't have a serial console permanently connected to my board. Looks like an error in the PMU https://linux-sunxi.org/AXP209 driver or it's interaction with the kernel during shutdown: https://lkml.iu.edu/hypermail/linux/kernel/1909.2/04767.html No idea how to solve this.
  8. root@sabre18:~# cat /etc/default/cpufrequtils ENABLE=true MIN_SPEED=480000 MAX_SPEED=1104000 GOVERNOR=conservative check your max cpufreq setting. My neo plus 2 runs stable only at 1,1GHz
  9. yes, mostly the nodes in the device tree are available but deactivated with status = "disabled"; And you simply can active them by saying status = "okay"; in an overlay. Furhermore you can override the standard values. What you did in the past with module parameters you nowdays do it in the device tree. check this: https://elinux.org/images/f/f9/Petazzoni-device-tree-dummies_0.pdf It helped me to get an overview what DTS is and how it interacts with the linux kernel drivers. Oh yes, its not easy to understand. It will take some time (at least for me it took years) but playing around is good for practise and step by step you will get familiar with it. Next version 22.05 will have the regulators enabled by default so you do not need the overlay anymore.
  10. http://tron.dyn.cc/sun7i-bananpro-ahci.dts download my test user overlay, copy it to your system and activate it (as root) with: armbian-add-overlay sun7i-bananpro-ahci.dts this should work on any kernel below 5.17 after release of 22.05 you need to remove it from /boot/overlay-user/
  11. solved with https://github.com/armbian/build/pull/3613 thanks @the-going
  12. [...found another thread] followup here:
  13. yes, these patches will go into official armbian images and will be available with next release 22.05 I think. Thanks @Igor for reactivating the state to supported. Now the official downloads are back on armbian page: https://redirect.armbian.com/bananapipro/Bullseye_current So I recommend you to first use the official image to get proper kernel and userland environment on your board. Later you can upgrade the kernel in usual way by "apt get update / upgrade" or aptitude. If you want to debug a non starting board you need to connect the serial console via USB to UART and watch it e.g. via minicom. And yes a native Linux machine is highly recommended 😉
  14. Hi @Igor perfect, thanks. Next step is to upgarde the WIFI firmware to 5.90.244: [ 13.975858] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: May 16 2018 23:42:49 version 5.90.244 FWID 01-0 I loaded it from kernel git here: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/brcm?id=d9430acf46774d75fa269a667b7b4598d60aa353 It magically diasppeared in the current kernel git repository, but I found it in a commit from 2018. I will test it for the next few days and then upload to armbian firmware repo.
  15. I know, I already hired for nanopi neo plus2 🙂 https://www.armbian.com/nanopi-neo-plus2/
  16. https://github.com/armbian/build/pull/3549 @Igor you may add me as maintainer for Banapi Pro.
  17. | __ )| _ \(_) | _ \ _ __ ___ | _ \| |_) | | | |_) | '__/ _ \ | |_) | __/| | | __/| | | (_) | |____/|_| |_| |_| |_| \___/ Welcome to Armbian 22.05.0-trunk with Linux 5.15.30-sunxi No end-user support: built from trunk System load: 7% Up time: 26 min Memory usage: 6% of 967M IP: 192.168.1.251 CPU temp: 34°C Usage of /: 71% of 908M building kernel and minimal image was succesful. But SATA is missing. Solution is to enable the reg_ahci_5v regulator pin like this: https://git.yoctoproject.org/linux-yocto-contrib/plain/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts Tested with a user overlay and armbian-add-overlay - SATA is back. I'd like to integrate it into armbian: - patch in patch/kernel/archive/sunxi-5.15/patches.armbian/arm-dts-sun7i-a20-bananapro-add-ahci-regulator.patch - added to patch/kernel/archive/sunxi-5.15/series.armbian But it get's not processed during kernel compiling? @Igor what I'm missing. There is already a patches.armbian/arm-dts-sun7i-a20-bananapro-add-hdmi-connector-de.patch - would it better to patch this patch to have only one file per board?
  18. https://github.com/armbian/build/pull/3504 this is my first pull request ever, please check.
  19. The mainline sunxi sets the cpufreq to 1,3 GHz on the nanopineoplus2. This is too fast for the older models. I would like to seed a /etc/default/cpufrequtils file with reduced MAX_SPEED. Where can I place it inside the armbian build process? Or do you have another idea how to initially reduce the max cpu speed? And btw. could you please reenable the automatic build for nanopineoplus2. I already set status to "supported" on the board page. But I belive there is something magic to bring this back.
  20. Hi Werner, oh yes, I definitively have access. I run two of these boards in my DACs for several years now: https://github.com/teknoid/dac/blob/master/pics/sabre18-top.jpg
  21. Hi community, I successfully set up 22.02 on a nanopineoplus2. Building and installation went fine. Some minor things I noticed: - zram on /var/log was full at some time - installing kernel headers failed in step "Compiling headers" with a segfault: scripts/dtc/livetree.c:809:13: internal compiler error: Segmentation fault 809 | static bool any_label_tree(struct dt_info *dti, struct node *node) | ^~~~~~~~~~~~~~ manually running "make" in /lib/modules/5.15.15-sunxi64/build also failed, but at least I got the dtc compiler compiled. | \ | | _ \(_) | \ | | ___ ___ | _ \| |_ _ ___ |___ \ | \| | |_) | | | \| |/ _ \/ _ \ | |_) | | | | / __| __) | | |\ | __/| | | |\ | __/ (_) | | __/| | |_| \__ \ / __/ |_| \_|_| |_| |_| \_|\___|\___/ |_| |_|\__,_|___/ |_____| Welcome to Armbian 22.02.0-trunk with bleeding edge Linux 5.15.15-sunxi64 No end-user support: built from trunk System load: 2% Up time: 5:55 Memory usage: 12% of 985M Zram usage: 1% of 492M IP: 192.168.1.206 192.168.1.207 CPU temp: 37°C Usage of /: 79% of 2.0G storage/: 99% of 458G storage temp: 22°C Last login: Fri Jan 21 11:05:05 2022 from 192.168.1.253 I would kindly ask you to put the nanopineoplus2 back onto the list of supported boards. You may enter me as maintainer if necessary. Best regards Heiko
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines