Werner
-
Posts
5894 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Werner
-
-
17 hours ago, Tido said:
At some place these rules need to be.
If thinking about...why?
See people that are moderating forums or will moderate in future are most likely no kids. They use common sense when doing their stuff. So it should suffice to MAYBE tell them these rules on time and it should be fine.
17 hours ago, Tido said:© 2019 Armbian. All rights reserved.
Not sure if this is even necessary. Theoretically Armbian is based within the European Union and therefore the EU copyright laws are active which don't see the need of such a hint. There is copyright protection in general. Those hints are needed by US law AFAIK.
-
You could try to set a fixed mac in your /boot/armbianEnv.txt like
ethaddr=02:38:a0:82:2d:c0
-
4 hours ago, Mangix said:
I have two power supplies that are the same as the one included EXCEPT for the fact that they are female connectors, not male. Any way to adapt them so that they work?
If they have the have the exact same ratings in voltage and current I'd say (and assumed you are a bit familiar with the basics) pickup a couple fitting connectors and solder them to the wires.
-
Isn't U-Boot the same for dev and current at the moment? Both are 2020.04?
-
7 hours ago, Tido said:
how will you cover all 3?
Basically doing the same thing as I did before when merging common issues and p2p. Merge their names too.
-
7 hours ago, Tido said:
Already there... https://forum.armbian.com/terms link is at the bottom of the forum
What I meant was merge the two seperate text blocks into one of not decided to throw the moderator part out completly. I know it is there, I got the mentioned information from right there
-
Marking this one as done to keep clarity and all important things has been adjusted.
-
There. Done
-
16 minutes ago, CHB said:
ok, after reading a lot of post in this forum i saw that the fastest cpu for tvbox was S922X or RK3399, which can advise me the best tvbox with eMMC memory (I will like to install the system on eMMC instead of android)
the goal being to find a tvbox that boots with armbian, a network card that works (I only connect to tvbox to the ethernet network, no screen, no sound, no BT or wifi or other, so the graphics are not important, just see in terminal mode) I want to install bionic or focal in server mode.
Thanks for your help
Then the best idea is to not get a tvbox but a board that is officially supported: https://www.armbian.com/download/
-
The registration terms containing:
QuoteUsers with moderator rights:
enforce users policy.
move threads to the correct sub forum
cut and move off topic sections from one thread to another,
merge more topics under one if that gives better topic overview,
can edit posts for a purpose of:
moving code under code,
moving text under spoilers,
if author explicitly asked for,
breaking the rules will result in a warning. Multiple warnings will result in revoking moderator rights
While the regulation as it is makes sense it does not being in the registration notes since the chance that a users registierung him-/herself just to become a moderator is decently low.
These should be more kind of rules that members have to agree which are elected to become a forums moderator.
Therefore I suggest to either remove those entirely or rewrite them to descripe what the rights and duties of moderators are and integrate this information into the common terms.
-
Another minor update.
Contact information has been updated. You can access and edit these information by clicking on your avatar at the very top right corner, click on Profile and then hit the Edit Profile button.
-
1 hour ago, son said:
So now we cannot using GC-2035 for Orange Pi ?
As long as noone takes up the task and write a proper driver for it and push it to mainline: no.
-
Not much to say about that. Do some of these mostly proprietary IM even still exist?
I suggest to replace a few of those with more adequate solutions like IRC, Matrix or Mastodon and threw out AIM, MSN, ICQ and Yahoo.
Opinions?
-
I also noticed that the subforums SD card and PSU issues and the garbage collector Board doesn't start are kind of redundant. Should those be merged too?
-
54 minutes ago, rna said:
Hi, is there anybody that successfully runs Armbian on H3 soc?
Sure, have multiple OrangePi One and an OrangePi Zero here which are built around the H2+/H3 SoC and working nicely.
However in your case I'd suggest start a) using the search engine and b) using the matching thread and not the one for aarch64 (H3 is 32bit and armhf).
-
Providing logs with
armbianmonitor -usignificantly raises chances that issue is getting addressed.
What command do you use to copy your files?
-
Move to p2p support since this is not an officially supported board.
You can try to isolate the issue by trying other builds like legacy (5.4), current (which is 5.8 at the moment so your current build is outdated) or even dev (5.9.0-rc2).
-
Patch has been upstreamed and is available in 5.8.6. No changes for us but to remove the previously added patch.
-
[ warn ] * applying kali-wifi-injection-1.patch [ failed ]
There is more. No idea about the cause. But did not really look into. Just noticed by chance.
-
[ warn ] * [l][c] wifi-4003-fix-sha256_state-clashes.patch [ failed ] [ warn ] * [l][c] wifi-4004-fix-cfg80211-for-5.8.patch [ failed ]
FYI
-
Yeah I was thinking about to add these codenames...but I think I remove it again to to confuse newbies...
-
Usually ntpd/chrony should take care for that. You could try to restart the equivalent daemon and check the logs if the times is correct again.
No need for an open port. A working internet connection is sufficient.
-
- Common issues and peer to peer support have been merged since they mostly cover the same
- Bugtracker forums for A64 & H5 has been merged with H6 since they share the same board family
-
Merge "SD card and PSU issues" with "Board does not start"?
in Armbian Project Administration
Posted
Yep, something like this.
Another reason to get rid of one of those
Understand. But it seems to me it is kind a mixed at the moment because there was not much such "movement".