krachlatte got a reaction from NicoD in Orangepi 3 h6 allwiner chip
i think the problerm is in this files these are coiming wiht the overlay, cbecuase forme the schematic its not PA oit is PD6 for the gmac
since you say v0.06 was working i changed back the usb settings i will upload a ne image
usb0_vbus-supply = <®_usb_vbus>;
+ usb1_vbus-supply = <®_usb_vbus>;
- usb3_vbus-supply = <®_usb_vbus>;
status = "okay";
v0.11 released and available for download
krachlatte reacted to NicoD in Orangepi 3 h6 allwiner chip
If you would read this thread you'd know that these people are working on getting a good OS working for it.
So no, there is no useable and stable os for it, no you can't use PCIe on it. This will take time.
There are other sbc's that can do what you want. I'd go for the NanoPi M4. It now has got a hat with 4xSATA.
A lot more work has been done for the RK3399's. It's also still a work in progress. But for what you want it's more than ready.
I wish everybody working on it good luck, I'm following this thread for a while, and have been testing a lot of @krachlatte images. I hope you're going to find the problem and may receive your unit quickly. I also had to wait a very long time for it(+1 month).
I can say that Orange Pi uses different images for the eMMC version vs without eMMC. I've tried a non-eMMC image and this didn't work on my eMMC version. So this could also be a factor to keep in mind.
krachlatte got a reaction from guidol in Orangepi 3 h6 allwiner chip
running on beelink gs1, headless
is v0.07 working, please send me the dmesg output after you have changed the /boot/armbianEnv.txt and verbosity=7
also could you send
tail -n 100 /var/log/syslog
or if you prefer in nmtui clone mac setting ...
/etc/network/interfaces to set the mac adress
iface eth0 inet dhcp
hwaddress ether 00:11:22:33:44:00