Search the Community

HowTo: Setting up resolution 1600x900 & 1366x768 ? &how can i set up other resolutions those are not in h3disp like 1600x900 board is orangepi-pc

1. Orange pi pc cant shut down ,remains blink. 2. Cant eject usb /sda file directory not available. 3.funny with much updates still cant connect to Internet with clearing block interfaces from armbian config.

Hello, I installed the Ubuntu desktop image from: https://www.armbian.com/orange-pi-pc/ to the SD Card with: sudo dd bs=4M if=Armbian_5.38_Orangepipc_Ubuntu_xenial_default_3.4.113_desktop.img of=/dev/sdb conv=fsync The orange pi does not boot, it took some time and the red LED is flashing on the top side and the screen is black. Maybe I did something wrong? Regards, caro

I have to clear possible blocked interfaces everytime I log on to get access to Internet. I m connected to network but if i dont clear that button i dont get access. Can help me .

I've installed armbian 5.38 debian stretch 4.14.14 on my Orange Pi PC .. after changing notwork settings (by using "armbian-config") from DHCP to Static , then back to DHCP, eth0 is not able anymore to get IP address.. "newtorkclt" return: IDX LINK TYPE OPERATIONAL SETUP 1 lo loopback n/a unmanaged 2 eth0 ether n/a unmanaged every suggestion will be usefull..

Hello again. I am beating my head against the network configuration again and would dearly love some help. I have two orange pi pc boards with static ip's in the 192.168.1. range. They are only connected to each other. They can ping and ssh each other just fine. I am trying to set up nfs shares between them without success. In /etc/exports I have: /home/martin/folder 192.168.1.*(rw,sync,no_subtree_check,nohide) I have "ALL: 192.168.1." in my /etc/hosts.allow. In /etc/fstab I have: 192.168.1.XXX:/home/martin/folder/from_lev /home/lev/folder/to_martin nfs rw,sync,noauto,user,x-systemd.automount 0 0 And vis-versa on the other pi. The folders all exist. I've rebooted, and tried a bunch of other things, but am still stuck. "sudo mount -a" returns without an error, although with that automount in there I'm not sure if it's trying anything. When I attempt to go into /folder/from lev the command line just hangs. A "sudo showmount" command returns "clnt_create: RPC: Program not registered." Google searches bring up a bunch of information about other distros, so I don't know if I have a firewall problem, port problem, services problem. . . Any ideas? Thanks in advance.

I find orangepipc packages in http://apt.armbian.com/dists/stretch/main/binary-armhf/Packages they are: linux-stretch-root-dev-orangepipc v5.37 linux-stretch-root-next-orangepipc v5.37 linux-headers-sun8i for kernel-3.4.113 v5.35 linux-image-sun8i for kernel-3.4.113 v5.35 linux-u-boot-orangepipc-default v5.35 same as they in Jessie.. what's the status about debian stretch on orangepipc? gfx, network, video?

Pink screen on monitor Acer AL1716. Armbian 5.35 legacy OrangePi PC HDMI with DSUB convertor new installation In previous version 5.24 works monitor fine. If I connect OPI to second monitor LG1752S and restart OPI, screen is OK. After reconnect back to AL1716, screen is still ok. But after restart with AL1716 is screen again pink. Tested some different resolutions with h3disp, but still get pink screen. Looks like problem with monitor detection at start. Is possible to disable detection after start with working monitor and set as default? Any other solution? Edit: I found simple workaround. Start OrangePi PC WITHOUT connected to monitor. After booting sequence is done, connect monitor back and screen is back.

I buy a touchscreen, with gt811 chip. After that, I google this post: So I try to install new kernel for H3 device. I read this page - https://www.armbian.com/kernel/ and install linux-image-dev-sun8i package. But after reboot my pi board don't work (see pic). How to install this new image properly? Sorry for my English.

Hi Everyone. I expect I'm making a simple mistake here, but I'm pretty new to this and could use some help. I am trying to set a static ip address on an orange pi pc running armbian Jessie 5.36. I want a static ip to set up an nfs between multiple boards. I've done this before on debian desktops, but this time I'm getting errors. I have tried multiple ways (editing the /etc/network/interfaces, nmtui, nmcli) without success. For simplicity, here's a version of what I'm doing. I start with a clean install. The Opi connects to my router fine. I add and update all the packages I need, then use nmtui to change the name of the network connection from "Ethernet Connection 1" to "Ethernet1". I try to set the static ip with this command: nmcli con mod Ethernet1 ipv4.address 192.168.1.100 ipv4.method manual connection.autoconnect yes This command does not produce any errors. I reboot, and the static ip address does display on the boot screen and /sbin/ifconfig. The problem is that any commands that need the network now give the error "Network is unreachable." Route -n is not empty, so I think I have a route out, but obviously I'm missing something. I can restore the network connection by setting the method back to automatic but as soon as I set it to manual I get this error. Any ideas?

I got an Orange Pi PC with Armbian Ubuntu Desktop installed. It runs perfectly fine. 1080p resolution, sound, ethernet, browsing, what-have you. It can even play x265 videos flawlessly (which is why I got it for as my RPi3 can't). Highest temp is 46C so far (with or without a heat sink and no fan). Anyway, I've updated and upgraded and then installed Kodi. My media is on my NAS, so I input my SMB info, and it connects fine. But as it reads the media, Kodi just shuts off on its own. No crash report or anything. It just closes and I'm back on the desktop. Re-opening it starts Kodi up for a sec and then closes itself. Deleting the user folder under a Kodi directory fixes the crashing, but after having Kodi read up my media again, it crashes yet again seconds later. It seems to be a database issue, maybe? Does anyone use Kodi here?

Hi, RTL811AU wifi dongle has different wlan number each time it is plugged in or system started. It has different MAC as well. Numbers after wlan corresponds to attached MAC addresses. my sysem is OrangepiPC with development kernel. dmesg shows following (I have removed a plugget in the same dongle 3 times)

Supporting of smb1 have been disabled on my windows hosts for security reasons. And now there are no ability to mount share from windows hosts on my orange pi pc. Can developers add this feature to armbian system in nearest updates? root@orangepipc:/media# mount -t cifs //192.168.1.5/D /media/share_test/ --verbose -o vers=2.1,user=user,pass=verystrongpassword mount.cifs kernel mount options: ip=192.168.1.5,unc=\\192.168.1.5\D,vers=2.1,user=user,pass=******** mount error(22): Invalid argument Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) root@orangepipc:/media# mount -t cifs //192.168.1.5/D /media/share_test/ --verbose -o user=user,pass=verystrongpassword mount.cifs kernel mount options: ip=192.168.1.5,unc=\\192.168.1.5\D,user=user,pass=******** mount error(112): Host is down Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)

Hi, Latest build Armbian 5.37 OPi PC legacy Jessie Desktop but desktop is not coming up on screen after default user creation, am I missing something or is this a new issue? Christos

Just got compiled a new OPi PC, Ubuntu desktop, Armbian 5.36 with mainline 4.14.3 kernel, image. The on-board codec sound though is just at a whisper level no matter what, it looks its there but barely heard at all. Can we fix that?

IPv6 is not working correctly for me although my connection information seems right, I am not able to ping6 to google.com for example. IPv4 is working fine. Is this a known bug? Or does anybody know a solution to this problem? In the pictures below you can see what error I'm getting and also my connection information.

Hi, I had set up my orange pi pc a long time ago and kinda forgot about it. I am looking at upgrading from debian 8 to debian 9 and I am not sure how it works with armbian? Do I just change the sources.list from jessie to stretch? or do I need to do something special? sources.list deb http://httpredir.debian.org/debian jessie main contrib non-free deb-src http://httpredir.debian.org/debian jessie main contrib non-free deb http://httpredir.debian.org/debian/ jessie-updates main contrib non-free deb-src http://httpredir.debian.org/debian/ jessie-updates main contrib non-free # security packages come always from main repository deb http://security.debian.org/ jessie/updates main contrib non-free deb-src http://security.debian.org/ jessie/updates main contrib non-free uname -a Linux orangepipc 3.4.113-sun8i #18 SMP PREEMPT Thu Jun 15 02:16:06 CEST 2017 armv7l GNU/Linux Apologies for asking something quite basic.

Hello all. Try as I might, I can't get HDMI sound on my OpiPC. orangepi@orangepipc:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sndhdmi [sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 I originally had no asound.conf, but I made one: pcm.!default { type hw card 1 } ctl.!default { type hw card 1 } Looking around, I see an unanswered question on this from '16. HDMI on the TV does work with a Meego stick. I did have audio through the headphone jack before I went and added the asound.conf and edited the alsa config file. But HDMI just refuses to work.

Hi, OPiPC with latest mainline (ARMBIAN 5.34 user-built Ubuntu 16.04.3 LTS 4.13.12-sunxi). Need to test the I2S0. From what I see in patches, the I2S driver code is already there so I just need an overlay to use it. Is there any DT overlay for using the H3 I2S0 with any codec ? Even as a generic simple-audio-codec ? Christos

Hi, How can I enable both the CS0 and CS1 on the SPI on OPiPC mainline? Need to have both spidev0.0 and spidev0.1 drivers concurently available, yet only one of them is enabled and visible. My armbianEnv.txt verbosity=1 logo=disabled console=both disp_mode=1920x1080p60 overlay_prefix=sun8i-h3 rootdev=UUID=72c69678-cb49-4c08-b5d3-396060e8ff18 rootfstype=ext4 overlays=spi-add-cs1 spi-spidev param_spidev_spi_bus=0 param_spidev_spi_cs=1 param_spidev_spi_cs=0 param_spidev_max_freq=10000000 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u If the latest param is param_spidev_spi_cs=1 then I get only spidev0.1, if the latest param is param_spidev_spi_cs=0 then I get spidev0.0, but never both of them. Is there any way that I can have both spidev0.0 and spidev0.1 available ? Christos

Hi, I would like to know if it is possible to limit USB speed to 1.1 standard on orangepipc and how to do it? I know it is doable on raspbian but I couldn't find info about doing this on armbian

Edit: Please see my second post in this thread. I think I've identified exactly what my problem is, please see my second post in the thread. I need to change the display mode to something that my own TV is able to display. But no matter what I've tried, I haven't been able to change the display mode. How do you do it? ---- Hello, I just got an Orange Pi PC. I installed using the Armbian_5.32.170629_Orangepipc_Ubuntu_xenial_dev_4.11.7.7z image. I'm able to log in through SSH, and I've installed all updates (apt-get update && apt-get upgrade) I have the Orange Pi PC connected to my HDMI television. The screen appears blank, nothing appears on it at any time. I tried experimenting with the disp_mode option in armbian-config -> System -> Bootenv. I tried "disp_mode=1280x720p60" and "disp_mode=640x480p60", neither have worked. The default didn't work either. edit: The screen is still blank. Since I posted, I've also tried putting these setenv video-mode sunxi:1280x720-24@60,monitor=dvi,hpd=1,edid=1 disp.screen0_output_mode=1280x720p60 in /boot/armbianEnv.txt, and then running "sudo mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr" and rebooting a few times. I also put 'saveenv' at the end of /boot/boot.cmd. None of this seems to have changed anything. What would you suggest I try doing next? ------- beyond this line, information taken from my Orange PI PC: ------- Kernel version: Linux orangepipc 4.11.12-sun8i #16 SMP Tue Nov 7 00:24:13 CET 2017 armv7l armv7l armv7l GNU/Linux dmesg: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.11.12-sun8i (root@armbian) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08) ) #16 SMP Tue Nov 7 00:24:13 CET 2017 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Xunlong Orange Pi PC [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7cc00000 [ 0.000000] On node 0 totalpages: 253952 [ 0.000000] free_area_init_node: node 0, pgdat c0b5fd80, node_mem_map ef740000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 57344 pages, LIFO batch:15 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 16 pages/cpu @ef6ec000 s34572 r8192 d22772 u65536 [ 0.000000] pcpu-alloc: s34572 r8192 d22772 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 252224 [ 0.000000] Kernel command line: root=UUID=37031002-c65e-4113-b451-f4b61a52ca54 rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=640x480p60 panic=10 consoleblank=0 loglevel=1 ubootpart=5fabfc8f-01 ubootsource=mmc sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 1015808 bytes of page_ext [ 0.000000] Memory: 971892K/1015808K available (6144K kernel code, 386K rwdata, 2392K rodata, 1024K init, 328K bss, 27532K reserved, 16384K cma-reserved, 212980K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf800000 - 0xbfe00000 ( 6 MB) .text : 0xc0008000 - 0xc0700000 (7136 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b60980 ( 387 kB) .bss : 0xc0b62000 - 0xc0bb40b0 ( 329 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000013] Switching to timer-based delay loop, resolution 41ns [ 0.000176] Console: colour dummy device 80x30 [ 0.000188] console [tty1] enabled [ 0.000209] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000219] pid_max: default: 32768 minimum: 301 [ 0.000387] Security Framework initialized [ 0.000397] AppArmor: AppArmor disabled by boot time parameter [ 0.000442] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000449] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001095] CPU: Testing write buffer coherency: ok [ 0.001476] CPU0: update cpu_capacity 1024 [ 0.001483] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001799] Setting up static identity map for 0x40100000 - 0x4010004c [ 0.002497] smp: Bringing up secondary CPUs ... [ 0.013099] CPU1: update cpu_capacity 1024 [ 0.013104] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.023742] CPU2: update cpu_capacity 1024 [ 0.023747] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.034355] CPU3: update cpu_capacity 1024 [ 0.034361] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.034424] smp: Brought up 1 node, 4 CPUs [ 0.034431] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.034434] CPU: All CPU(s) started in HYP mode. [ 0.034436] CPU: Virtualization extensions available. [ 0.035297] devtmpfs: initialized [ 0.041046] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.041277] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.041292] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.042083] xor: measuring software checksum speed [ 0.134194] arm4regs : 1261.600 MB/sec [ 0.234238] 8regs : 750.000 MB/sec [ 0.334290] 32regs : 768.000 MB/sec [ 0.434336] neon : 1282.400 MB/sec [ 0.434340] xor: using function: neon (1282.400 MB/sec) [ 0.434429] pinctrl core: initialized pinctrl subsystem [ 0.435275] NET: Registered protocol family 16 [ 0.437588] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.438792] cpuidle: using governor ladder [ 0.438918] cpuidle: using governor menu [ 0.439619] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.439623] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.624562] raid6: int32x1 gen() 189 MB/s [ 0.794585] raid6: int32x1 xor() 160 MB/s [ 0.964699] raid6: int32x2 gen() 255 MB/s [ 1.134879] raid6: int32x2 xor() 198 MB/s [ 1.304999] raid6: int32x4 gen() 258 MB/s [ 1.475036] raid6: int32x4 xor() 193 MB/s [ 1.645149] raid6: int32x8 gen() 247 MB/s [ 1.815145] raid6: int32x8 xor() 172 MB/s [ 1.985255] raid6: neonx1 gen() 494 MB/s [ 2.155299] raid6: neonx1 xor() 366 MB/s [ 2.325413] raid6: neonx2 gen() 663 MB/s [ 2.495416] raid6: neonx2 xor() 478 MB/s [ 2.665552] raid6: neonx4 gen() 796 MB/s [ 2.835623] raid6: neonx4 xor() 533 MB/s [ 3.005714] raid6: neonx8 gen() 703 MB/s [ 3.175760] raid6: neonx8 xor() 485 MB/s [ 3.175765] raid6: using algorithm neonx4 gen() 796 MB/s [ 3.175768] raid6: .... xor() 533 MB/s, rmw enabled [ 3.175771] raid6: using intx1 recovery algorithm [ 3.175984] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc/pinctrl@01f02c00/usb0_vbus_pin@0, deferring probe [ 3.177092] SCSI subsystem initialized [ 3.177252] libata version 3.00 loaded. [ 3.177484] usbcore: registered new interface driver usbfs [ 3.177538] usbcore: registered new interface driver hub [ 3.177614] usbcore: registered new device driver usb [ 3.177796] media: Linux media interface: v0.10 [ 3.177837] Linux video capture interface: v2.00 [ 3.177898] pps_core: LinuxPPS API ver. 1 registered [ 3.177902] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 3.177917] PTP clock support registered [ 3.178254] Advanced Linux Sound Architecture Driver Initialized. [ 3.179377] clocksource: Switched to clocksource arch_sys_counter [ 3.179523] VFS: Disk quotas dquot_6.6.0 [ 3.179578] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.180187] simple-framebuffer 7e000000.framebuffer: framebuffer at 0x7e000000, 0x3f4800 bytes, mapped to 0xf0a80000 [ 3.180196] simple-framebuffer 7e000000.framebuffer: format=x8r8g8b8, mode=1920x540x32, linelength=7680 [ 3.199053] Console: switching to colour frame buffer device 240x33 [ 3.217288] simple-framebuffer 7e000000.framebuffer: fb0: simplefb registered! [ 3.225112] NET: Registered protocol family 2 [ 3.225634] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 3.225720] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 3.225831] TCP: Hash tables configured (established 8192 bind 8192) [ 3.225919] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 3.225973] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 3.226178] NET: Registered protocol family 1 [ 3.226566] RPC: Registered named UNIX socket transport module. [ 3.226570] RPC: Registered udp transport module. [ 3.226573] RPC: Registered tcp transport module. [ 3.226576] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.226814] Trying to unpack rootfs image as initramfs... [ 3.520024] Freeing initrd memory: 5012K [ 3.521968] audit: initializing netlink subsys (disabled) [ 3.522100] audit: type=2000 audit(3.510:1): state=initialized audit_enabled=0 res=1 [ 3.522271] Initialise system trusted keyrings [ 3.522392] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 3.529716] zbud: loaded [ 3.532770] NFS: Registering the id_resolver key type [ 3.532797] Key type id_resolver registered [ 3.532800] Key type id_legacy registered [ 3.532811] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.532814] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 3.533811] JFS: nTxBlock = 7760, nTxLock = 62080 [ 3.542065] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 3.549335] Key type asymmetric registered [ 3.549443] bounce: pool size: 64 pages [ 3.549504] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.549633] io scheduler noop registered [ 3.549637] io scheduler deadline registered [ 3.550032] io scheduler cfq registered (default) [ 3.550037] io scheduler mq-deadline registered [ 3.554693] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 3.556449] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 3.608571] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 3.611159] console [ttyS0] disabled [ 3.631309] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 41, base_baud = 1500000) is a U6_16550A [ 3.631357] console [ttyS0] enabled [ 3.635226] brd: module loaded [ 3.641528] loop: module loaded [ 3.642817] libphy: Fixed MDIO Bus: probed [ 3.644268] usbcore: registered new interface driver catc [ 3.644313] usbcore: registered new interface driver kaweth [ 3.644317] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 3.644360] usbcore: registered new interface driver pegasus [ 3.644414] usbcore: registered new interface driver rtl8150 [ 3.644476] usbcore: registered new interface driver r8152 [ 3.644519] usbcore: registered new interface driver lan78xx [ 3.644576] usbcore: registered new interface driver asix [ 3.644619] usbcore: registered new interface driver ax88179_178a [ 3.644661] usbcore: registered new interface driver cdc_ether [ 3.644703] usbcore: registered new interface driver cdc_eem [ 3.644752] usbcore: registered new interface driver dm9601 [ 3.644795] usbcore: registered new interface driver sr9700 [ 3.644853] usbcore: registered new interface driver CoreChips [ 3.644912] usbcore: registered new interface driver smsc75xx [ 3.644973] usbcore: registered new interface driver smsc95xx [ 3.645015] usbcore: registered new interface driver gl620a [ 3.645058] usbcore: registered new interface driver net1080 [ 3.645108] usbcore: registered new interface driver plusb [ 3.645152] usbcore: registered new interface driver rndis_host [ 3.645196] usbcore: registered new interface driver cdc_subset [ 3.645240] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 3.645306] usbcore: registered new interface driver cdc_ncm [ 3.645351] usbcore: registered new interface driver huawei_cdc_ncm [ 3.645394] usbcore: registered new interface driver cdc_mbim [ 3.645403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.645406] ehci-platform: EHCI generic platform driver [ 3.645555] ehci-platform 1c1a000.usb: EHCI Host Controller [ 3.645580] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1 [ 3.646196] ehci-platform 1c1a000.usb: irq 27, io mem 0x01c1a000 [ 3.669419] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 [ 3.669690] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.669697] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.669702] usb usb1: Product: EHCI Host Controller [ 3.669708] usb usb1: Manufacturer: Linux 4.11.12-sun8i ehci_hcd [ 3.669713] usb usb1: SerialNumber: 1c1a000.usb [ 3.670252] hub 1-0:1.0: USB hub found [ 3.670294] hub 1-0:1.0: 1 port detected [ 3.670874] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.670892] ohci-platform: OHCI generic platform driver [ 3.671043] ohci-platform 1c1a400.usb: Generic Platform OHCI controller [ 3.671066] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2 [ 3.671199] ohci-platform 1c1a400.usb: irq 28, io mem 0x01c1a400 [ 3.743624] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.743631] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.743637] usb usb2: Product: Generic Platform OHCI controller [ 3.743642] usb usb2: Manufacturer: Linux 4.11.12-sun8i ohci_hcd [ 3.743647] usb usb2: SerialNumber: 1c1a400.usb [ 3.744117] hub 2-0:1.0: USB hub found [ 3.744153] hub 2-0:1.0: 1 port detected [ 3.744742] usbcore: registered new interface driver cdc_wdm [ 3.744826] usbcore: registered new interface driver usb-storage [ 3.745508] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0 [ 3.745514] sun6i-rtc 1f00000.rtc: RTC enabled [ 3.745561] i2c /dev entries driver [ 3.748895] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 3.750063] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 3.809405] sunxi-mmc 1c0f000.mmc: base:0xf13d2000 irq:25 [ 3.810305] ledtrig-cpu: registered to indicate activity on CPUs [ 3.810378] hidraw: raw HID events driver (C) Jiri Kosina [ 3.810534] usbcore: registered new interface driver usbhid [ 3.810537] usbhid: USB HID core driver [ 3.810989] Initializing XFRM netlink socket [ 3.811680] NET: Registered protocol family 10 [ 3.828718] Segment Routing with IPv6 [ 3.828797] NET: Registered protocol family 17 [ 3.828828] NET: Registered protocol family 15 [ 3.828876] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.828917] 8021q: 802.1Q VLAN Support v1.8 [ 3.828954] Key type dns_resolver registered [ 3.829318] Registering SWP/SWPB emulation handler [ 3.829956] registered taskstats version 1 [ 3.829960] Loading compiled-in X.509 certificates [ 3.830032] zswap: loaded using pool lzo/zbud [ 3.831494] Btrfs loaded, crc32c=crc32c-generic [ 3.839011] Key type encrypted registered [ 3.844868] ehci-platform 1c1b000.usb: EHCI Host Controller [ 3.844900] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3 [ 3.845118] ehci-platform 1c1b000.usb: irq 29, io mem 0x01c1b000 [ 3.856568] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.858479] mmc0: new high speed SDHC card at address 59b4 [ 3.859081] mmcblk0: mmc0:59b4 00000 7.48 GiB [ 3.860321] mmcblk0: p1 [ 3.869434] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 3.869617] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.869624] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.869629] usb usb3: Product: EHCI Host Controller [ 3.869635] usb usb3: Manufacturer: Linux 4.11.12-sun8i ehci_hcd [ 3.869640] usb usb3: SerialNumber: 1c1b000.usb [ 3.870151] hub 3-0:1.0: USB hub found [ 3.870186] hub 3-0:1.0: 1 port detected [ 3.870791] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.870822] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 4 [ 3.871037] ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 [ 3.899393] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.899569] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.899576] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.899581] usb usb4: Product: EHCI Host Controller [ 3.899586] usb usb4: Manufacturer: Linux 4.11.12-sun8i ehci_hcd [ 3.899591] usb usb4: SerialNumber: 1c1c000.usb [ 3.900093] hub 4-0:1.0: USB hub found [ 3.900126] hub 4-0:1.0: 1 port detected [ 3.900671] ehci-platform 1c1d000.usb: EHCI Host Controller [ 3.900694] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 5 [ 3.900862] ehci-platform 1c1d000.usb: irq 33, io mem 0x01c1d000 [ 3.929388] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00 [ 3.929562] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.929568] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.929573] usb usb5: Product: EHCI Host Controller [ 3.929579] usb usb5: Manufacturer: Linux 4.11.12-sun8i ehci_hcd [ 3.929583] usb usb5: SerialNumber: 1c1d000.usb [ 3.930074] hub 5-0:1.0: USB hub found [ 3.930104] hub 5-0:1.0: 1 port detected [ 3.930628] ohci-platform 1c1b400.usb: Generic Platform OHCI controller [ 3.930649] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6 [ 3.930769] ohci-platform 1c1b400.usb: irq 30, io mem 0x01c1b400 [ 4.003536] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.003543] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.003548] usb usb6: Product: Generic Platform OHCI controller [ 4.003554] usb usb6: Manufacturer: Linux 4.11.12-sun8i ohci_hcd [ 4.003558] usb usb6: SerialNumber: 1c1b400.usb [ 4.004062] hub 6-0:1.0: USB hub found [ 4.004097] hub 6-0:1.0: 1 port detected [ 4.004640] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.004661] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7 [ 4.004793] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 [ 4.073536] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.073543] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.073548] usb usb7: Product: Generic Platform OHCI controller [ 4.073554] usb usb7: Manufacturer: Linux 4.11.12-sun8i ohci_hcd [ 4.073559] usb usb7: SerialNumber: 1c1c400.usb [ 4.074123] hub 7-0:1.0: USB hub found [ 4.074154] hub 7-0:1.0: 1 port detected [ 4.074704] ohci-platform 1c1d400.usb: Generic Platform OHCI controller [ 4.074727] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8 [ 4.074862] ohci-platform 1c1d400.usb: irq 34, io mem 0x01c1d400 [ 4.143539] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.143546] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.143551] usb usb8: Product: Generic Platform OHCI controller [ 4.143556] usb usb8: Manufacturer: Linux 4.11.12-sun8i ohci_hcd [ 4.143561] usb usb8: SerialNumber: 1c1d400.usb [ 4.144096] hub 8-0:1.0: USB hub found [ 4.144128] hub 8-0:1.0: 1 port detected [ 4.144752] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 4.145084] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 4.145093] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 9 [ 4.145291] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.145298] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.145303] usb usb9: Product: MUSB HDRC host driver [ 4.145308] usb usb9: Manufacturer: Linux 4.11.12-sun8i musb-hcd [ 4.145313] usb usb9: SerialNumber: musb-hdrc.1.auto [ 4.145925] hub 9-0:1.0: USB hub found [ 4.145960] hub 9-0:1.0: 1 port detected [ 4.146729] of_cfs_init [ 4.146811] of_cfs_init: OK [ 4.146918] vcc3v0: disabling [ 4.146924] vcc5v0: disabling [ 4.146929] usb0-vbus: disabling [ 4.146932] ALSA device list: [ 4.146934] No soundcards found. [ 4.148452] Freeing unused kernel memory: 1024K [ 4.210247] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.210737] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.215005] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.259512] usb 4-1: new high-speed USB device number 2 using ehci-platform [ 4.275069] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.276706] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.277113] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.277527] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.277935] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.278380] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.278752] random: udevadm: uninitialized urandom read (16 bytes read) [ 4.477828] usb 4-1: New USB device found, idVendor=1737, idProduct=0078 [ 4.477838] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.477844] usb 4-1: Product: Linksys RangePlus Wireless Network USB Adapter [ 4.477849] usb 4-1: Manufacturer: Cisco-Linksys LLC [ 4.559432] usb 8-1: new low-speed USB device number 2 using ohci-platform [ 4.823449] usb 8-1: New USB device found, idVendor=045e, idProduct=00f9 [ 4.823460] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.823466] usb 8-1: Product: Microsoft Wireless Desktop Receiver 3.1 [ 4.823471] usb 8-1: Manufacturer: Microsft [ 4.941559] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/platform/soc/1c1d400.usb/usb8/8-1/8-1:1.0/0003:045E:00F9.0001/input/input0 [ 5.009720] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-1c1d400.usb-1/input0 [ 5.009795] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor [ 5.025226] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/platform/soc/1c1d400.usb/usb8/8-1/8-1:1.1/0003:045E:00F9.0002/input/input1 [ 5.089594] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-1c1d400.usb-1/input1 [ 5.517909] sunxi-mmc 1c0f000.mmc: smc 0 err, cmd 18, RD DTO !! [ 5.517949] sunxi-mmc 1c0f000.mmc: data error, sending stop command [ 5.518010] mmcblk0: timed out sending r/w cmd command, card status 0x900 [ 5.838687] random: fast init done [ 6.008398] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 6.510902] systemd[1]: System time before build time, advancing clock. [ 6.541371] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 6.541865] systemd[1]: Detected architecture arm. [ 6.610269] systemd[1]: Set hostname to <orangepipc>. [ 7.023974] sunxi-mmc 1c0f000.mmc: smc 0 err, cmd 18, RD DTO !! [ 7.024020] sunxi-mmc 1c0f000.mmc: data error, sending stop command [ 7.024075] mmcblk0: timed out sending r/w cmd command, card status 0x900 [ 7.424401] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.449732] systemd[1]: Listening on Syslog Socket. [ 7.479508] systemd[1]: Reached target Remote File Systems (Pre). [ 7.509767] systemd[1]: Listening on Journal Audit Socket. [ 7.539933] systemd[1]: Created slice User and Session Slice. [ 7.569634] systemd[1]: Listening on udev Control Socket. [ 7.600216] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.285193] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 9.469037] input: r_gpio_keys as /devices/platform/r_gpio_keys/input/input2 [ 9.533300] thermal thermal_zone0: failed to read out thermal zone (-16) [ 9.724525] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok [ 9.832307] rc rc0: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0 [ 9.837662] Registered IR keymap rc-empty [ 9.837989] input: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0/input3 [ 9.838129] sunxi-ir 1f02000.ir: initialized sunXi IR driver [ 9.880263] lirc_dev: IR Remote Control driver registered, major 244 [ 9.896406] mousedev: PS/2 mouse device common for all mice [ 9.911563] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0 [ 9.911576] IR LIRC bridge handler initialized [ 10.099477] usb 4-1: reset high-speed USB device number 2 using ehci-platform [ 10.299509] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected [ 10.354168] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 10.355002] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 10.356291] usbcore: registered new interface driver rt2800usb [ 10.369922] rt2800usb 4-1:1.0 wlx98fc11ca00b2: renamed from wlan0 [ 10.910102] systemd-journald[328]: Received request to flush runtime journal from PID 1 [ 10.960265] libphy: 1c30000.ethernet: probed [ 10.964606] Generic PHY 1c30000.ethernet-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=1c30000.ethernet-0:01, irq=-1) [ 10.964618] sun8i-emac 1c30000.ethernet: device MAC address slot 0 02:81:31:1b:c3:da [ 10.965884] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01 [ 10.965957] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01 [ 10.965962] sun8i-emac 1c30000.ethernet: device MAC address slot 2 01:00:5e:00:00:01 [ 10.965975] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.131715] random: crng init done [ 12.673680] IPv6: ADDRCONF(NETDEV_UP): wlx98fc11ca00b2: link is not ready [ 12.673859] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 12.676617] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 13.039959] sun8i-emac 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 13.194067] IPv6: ADDRCONF(NETDEV_UP): wlx98fc11ca00b2: link is not ready [ 13.194114] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.194260] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01 [ 13.194266] sun8i-emac 1c30000.ethernet: device MAC address slot 2 01:00:5e:00:00:01 [ 13.194271] sun8i-emac 1c30000.ethernet: device MAC address slot 3 33:33:ff:1b:c3:da [ 13.529563] IPv6: ADDRCONF(NETDEV_UP): wlx98fc11ca00b2: link is not ready [ 16.368152] wlx98fc11ca00b2: authenticate with 08:bd:43:a5:ae:54 [ 16.407902] wlx98fc11ca00b2: send auth to 08:bd:43:a5:ae:54 (try 1/3) [ 16.410065] wlx98fc11ca00b2: authenticated [ 16.419501] wlx98fc11ca00b2: associate with 08:bd:43:a5:ae:54 (try 1/3) [ 16.422956] wlx98fc11ca00b2: RX AssocResp from 08:bd:43:a5:ae:54 (capab=0x411 status=0 aid=10) [ 16.431758] wlx98fc11ca00b2: associated [ 16.432149] IPv6: ADDRCONF(NETDEV_CHANGE): wlx98fc11ca00b2: link becomes ready [ 283.748868] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01 [ 283.748911] sun8i-emac 1c30000.ethernet: device MAC address slot 2 01:00:5e:00:00:01 [ 283.748936] sun8i-emac 1c30000.ethernet: device MAC address slot 3 33:33:ff:1b:c3:da

Hello Everyone, At first I'm sorry for my English I started working with Ubuntu server version -> Armbian_5.30_Orangepipc_Ubuntu_xenial_default_3.4.113. For my purposes I needed to enable watchdog on my board. It took me a while, but I managed to do it. After setting up whole configuration, and then start stop tests everythink seems to work just fine (watchdog reboot my bord). To finish whole process I wanted to enable wdog to start at boot, but it didnt activate after reset. After some digging in Internet and investigation i figured out that in watchdog.service file one line is missed which was in all other services. So after adding [Install] WantedBy=default.target to service file and rebooting bord, watchdog starts working . I wanted to add this to the repo, but i coudn't find place where i had to do it So if somebody can and know where it is i would be grateful, for adding it Cheers,

I've installed Armbian again. Initially I logged in as root and 1234 password which worked. Then it asked to change the password. Something wen't wrong with it. My OrangePi PC boots fine and ok. When I open a terminal and try to do a "sudo this that" it asks my password and won't accept the one I gave, nor 1234. I've done the full installation a couple of times and same problem persists. How do I rest root password? The problem is that everytime I re-install everything and I'me at the very firts log (where I enter root and 1234) the screen scrolls so that I cannot see what it is asking since my monitor is 1600x1024. That I why I need to reset password afterwards. I' the only user.

Hi, I have problem with my Orange Pi PC, where I installed Armbian_5.30_Orangepipc_Ubuntu_xenial_default_3.4.113. I install python-jabberbot and python-daemon to create daemon to do queries by jabber comunication protocol. When I am active on ssh I get answers from bot in seconds, but when I try get answer without, I must wait about 1-2 minutes to answer. Do you konow what may be responsible for this behavior? Best regards, Leszek Mazur