There is no power on SATA and USB, when powered through 4.0 * 1.7 connector

[mrdeniska1234 0]

Armbianmonitor:

http://ix.io/1UtU

When connecting via a round connector, there is no power to SATA and USB, when connecting power to the USB-OTG, without disconnecting the round connector, power appears, when the power is turned off from the USB-OTG, the power on the ports does not disappear, while rebooting too. I tried to google, but to no avail

Thank you in advance

[Igor 2301]

Update boot loader to latest version - armbian-config -> system -> install/update boot loader ... and try again.

 

What kind of PSU are you using?

[mrdeniska1234 0]

I use PSU from my mi mix 2 phone, I also tried to power from power bank xiaomi on 20k mah, which supports fast charge. I will update this post after trying.

[Igor 2301]

I  tried on my board and everything is O.K. (with latest image)

It could be a hardware failure where software support can't help.

[mrdeniska1234 0]

please tell me what are the characteristics of your PSU? is it 5v 2a?

[Igor 2301]

5 minutes ago, mrdeniska1234 said:

please tell me what are the characteristics of your PSU

https://www.gwinstek.com/en-US/products/detail/GPE-X323

 

Mainly using fixed 5V / 5A output.

[mrdeniska1234 0]

On 9/7/2019 at 2:40 PM, Igor said:

Update boot loader to latest version - armbian-config -> system -> install/update boot loader ... and try again.

 

Trying this, nothing changed. apparently really not enough power. Thanks for the detailed answer!