Nano Pi Neo Core TP-Link Hotspot not working

[Kishore Saldanha]

Armbianmonitor:

http://ix.io/24Ky

Hi guys,

I am trying to use TP-Link dongle WN722N v3 as an access point . I am using Nano Pi Neo Core EMMC with expansion board running  Armbian Buster with Linux 5.3.9-sunxi . 

The device can detect wifi signals nearby as seen on nmtui in managed mode  . I followed the instructions on https://forum.odroid.com/viewtopic.php?f=52&t=25472&sid=84d2b8f1e7ad477e9907591eb7fb030d to configure as access point . 

However , I get an error every time like this . 

root@Cyborg:~# nmcli connection up HotSpot ifname wlx503eaaa2df7b
Error: Connection activation failed: Connection 'HotSpot' is not available on device wlx503eaaa2df7b because profile is not compatible with device (the device does not support Access Point mode)

Output of dmesg | tail -n 20 on inserting the dongle . 

[ 1225.431164] ---[ end trace 91514764a9d606b4 ]---
[ 1225.431176] RTW: rtw_wdev_free(wdev=3fa7fa4c)
[ 1225.431184] RTW: rtw_wiphy_free(phy1)
[ 1225.431222] RTW: rtw_usb_primary_adapter_deinit((null))
[ 1225.431227] RTW: rtw_dev_unload: bup==_FALSE
[ 1225.431239] RTW: +r871xu_dev_remove, hw_init_completed=0
[ 1225.431664] RTW: WARN free_recv_skb_queue not empty, 8
[ 1225.431719] RTW: usb attached..., try to reset usb device
[ 1225.557473] usb 3-1: reset high-speed USB device number 3 using ehci-platform
[ 1225.714010] In rtw_drv_init return -ENODEV
[ 1225.714340] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[ 1225.763898] r8188eu 3-1:1.0 wlx503eaaa2df7b: renamed from wlan0
[ 1226.629967] MAC Address = 50:3e:aa:a2:df:7b
root@Cyborg:~#

I know the dongle works  because I used it on a Nano Pi Duo running FriendlyARM's running Ubuntu Linux kernel version 4.14.0 . 

 

I am really confused . Is it a kernel issue ? My main intention is to use some GPIOs using Wiring Pi and run an apache webserver on it .  I want to use the dongle to serve HTML pages over a hotspot . Any help is appreciated .

[Igor]

2 hours ago, Kishore Saldanha said:

I am really confused . Is it a kernel issue ?

It's a driver - from 3rd party hardware Armbian have no resources (time, people, money) to do anything about - issue. What you can do beside using better dongle? Blacklist existing driver and try to build some other from the internet. Everything in this regard is available on Armbian: compiler and headers.

Moving to general section since it has nothing to do with Nanopi H3.

 

2 hours ago, Kishore Saldanha said:

I followed the instructions on

You could better use official way - you have way more chance to success: 

 

 

Quote

MT7601U

I think you will not see AP (while STA works normally) on this chip unless you fix the driver. IIIRC this function is simply broken / not done yet.

[Kishore Saldanha]

Hi Igor,

I tried using armbian-config . It downloaded hostapd and hostapd-realtek but it could not configure it as an access point .

Do you suggest any dongle for my application(low bandwidth , only for short distances , access-point) . I tried the 2$ Ralink adapter and TP-Link WN722N . 

This time maybe I'll buy something other than Realtek

[Igor]

27 minutes ago, Kishore Saldanha said:

Do you suggest any dongle

For AP use Realtek 8811 / 8812 / 8814AU. They works the best! 

 

27 minutes ago, Kishore Saldanha said:

I tried using armbian-config . It downloaded hostapd and hostapd-realtek but it could not configure it as an access point .

This works if you driver works properly. If you don't use 2$ shit