Jump to content

Problems with Zram on H2/3/5 boards - zram: Decompression failed! err=-22


Hammy
Go to solution Solved by Icenowy,

Recommended Posts

Armbianmonitor:

Good evening,

 

I ran into some problems with sbc-bench on a couple of Allwinner boards Orange Pi Zero, Orange Pi Zero+, Orange Pi One and Nanopi Neo 2 spcifically. The 7 Zip benchmark causes the following error:

 

./sbc-bench.sh: Zeile 611:  4206 Bus-Zugriffsfehler      "${SevenZip}" b >> ${TempLog}

 

Most likely due to a problem with the ZRam:

 

zram: Decompression failed! err=-22

 

This happens on all boards under Debian and focal with different SD cards and power supplies. The benchmark ran previously on this setups without any issues – unfortunately I don’t know when it stopped working and hence cannot narrow down the change that caused the problem.

 

The benchmark results and armbianmonitor output from the Orange Pi one as an example:

 

http://ix.io/2EPZ

http://ix.io/2ES2

 

Is this a known issue? Is there a solution?

 

Daniel

Link to comment
Share on other sites

Thanks for the info, is there any work around?

 

Switching to zstd caused the same error and crashed the board while benchmarking. After a reboot: http://ix.io/2F3t  - Interestingly it says:

### Activated 1 lzo-rle zram swap devices with 491 MB each

 

While

root@orangepizero:~# zramctl

NAME       ALGORITHM DISKSIZE  DATA  COMPR TOTAL STREAMS MOUNTPOINT

/dev/zram1 zstd        491,6M    4K    58B    4K       4 [SWAP]

/dev/zram0 zstd           50M  1,4M 184,1K  572K       4 /var/log

 

Daniel

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines