constantius Posted March 23, 2021 Posted March 23, 2021 https://www.electronics-lab.com/shenzhen-lc-technologys-cherry-pi-pc-v7-is-a-replica-of-orange-pi-pc/ http://linuxgizmos.com/allwinner-h3-based-cherry-pi-pc-rolls-as-orange-pi-pc-lookalike/ Works with Armbian images to Orange Pi PC ( Ubuntu 18.04 and 20.04 -XFCE 4.12 4.14 GUI ( Debian not tested ) You have to up down CPU frequencies from 1400MHZ to 1296MHZ Best regards
jock Posted March 24, 2021 Posted March 24, 2021 22 hours ago, constantius said: https://www.electronics-lab.com/shenzhen-lc-technologys-cherry-pi-pc-v7-is-a-replica-of-orange-pi-pc/ http://linuxgizmos.com/allwinner-h3-based-cherry-pi-pc-rolls-as-orange-pi-pc-lookalike/ Works with Armbian images to Orange Pi PC ( Ubuntu 18.04 and 20.04 -XFCE 4.12 4.14 GUI ( Debian not tested ) You have to up down CPU frequencies from 1400MHZ to 1296MHZ Best regards It looks like nothing more than scrapped orange pi's with another name and the ancient H3 SoC. I would not buy it.
Gabriel D Posted January 10, 2022 Posted January 10, 2022 (edited) I have bought a couple of them (one with 8gb emmc). It works fairly well and stable, and is nearly a clone of the OPPC+. However, I have noticed that it doesn't accept frequency scaling in armbian-config, display the cpu frequency in htop, or take a reboot without losing it's ability to identify the display it is connected to. I tried to see what the cpufreq-info was, and it said the driver was unknown with no info on all 4 cores. I think the power management must be different in some way. I tried to set a minimum and maximum processor speed in both Armbian Buster and Focal, and they both encounter errors when attempting to do so. I noticed when taking an installation directly from my Orange Pi PC+ to the Cherry Pi, the performance dropped considerably during video playback and the cpu temperature rose, so it isn't an exact clone hardware wise. Edited January 10, 2022 by Gabriel D type o
SA_ Posted January 23, 2022 Posted January 23, 2022 (edited) Would anyone be able to provide/direct to an image they have used for this board? Despite configuring the image in the original post as mentioned (and numerous others), I haven't been able to find/create an image that is anywhere near stable. Virtually every image I have tried experiences errors during the boot process or in normal operation (already ruled out other issues such as power), so I'm starting to wonder if it's a different issue entirely. Edited January 23, 2022 by SA_
guidol Posted January 25, 2022 Posted January 25, 2022 On 3/24/2021 at 1:38 PM, jock said: It looks like nothing more than scrapped orange pi's with another name and the ancient H3 SoC. I would not buy it. but its one of the boards that boot also "BASIC Engine NextGeneration" https://betest.freeflarum.com/d/87-h3-based-boards-that-boot-enginebasic-ng/23 and https://basicengine.org/nextgen.html
Recommended Posts