Th0mc Posted May 4, 2021 Share Posted May 4, 2021 Armbianmonitor: http://ix.io/3lJH Hi all, I'm a bit lost to find the root cause so I share all what I noticed Installed - I'm using Armbian_21.02.4_Odroidn2_buster_current_5.10.27.img image on a eMMC 64Gb on an Odroid N2+ board - I installed docker and have two containers activated from portainer/portainer-ce and linuxserver/plex images - I installed exFat-fuse and exFat-utils to be able to mount an external exFat drive connected via USB Issues - Right after booting, the USB drive is mounted but is not seen by Plex. Restarting the plex container make the trick but I have to do it each time - After some time, the mounting point is not anymore accessible and give me the ' Transport endpoint is not connected' error message' Whatever I tried, I'm not able to get it properly mounted again without rebooting the board (plug out, plug in) - After some time, the board is like 'shutdown'. Not able to reach it by ssh and not even have ip anymore - At anytime, if I try a 'soft' reboot, I have the same issue (red led on, blue one blinking) and I need to plug out/in to get it working I have searched a lot, the only thing I found was to plug the usb disk on the usb port near the hdmi port but I still have this issues **Edit** seems I don't have the shutdown issue for hours but again the 'Transport endpoint is not connected' and soft reboot issue. Thanks in advance for any help Please note that I previously use the same setup on RPi4 without any issue so I don't think the USB drive is the cause Tom 0 Quote Link to comment Share on other sites More sharing options...
Th0mc Posted May 4, 2021 Author Share Posted May 4, 2021 Just to add that armbianmonitor report above is when I have the ' Transport endpoint is not connected' issue. This one : http://ix.io/3lJR is just after a hard reboot when the disk is correctly mounted 0 Quote Link to comment Share on other sites More sharing options...
Th0mc Posted May 6, 2021 Author Share Posted May 6, 2021 After a few days running with my USB Drive plugged near HDMI port, I can say that I don't have anymore : - 'shutdown' state of the board - problem to have a soft reboot But I'm still issuing : - ' Transport endpoint is not connected' error message after a few hours - Not all the time (because it happens to work one time only), PLEX not seeing the mounted drive after booting and need a Plex container restart 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.