dolphs Posted June 2, 2021 Posted June 2, 2021 Just flashed rockpi-4a current buster image and it looks like I hit " Error: Unable to read database "/var/lib/vnstat/wg0": No such file or directory Merge "eth0+wg0" failed. ", which can be shown here Spoiler login as: root root@rockpi-4a's password: ____ _ _ _ _ _ | _ \ ___ ___| | ___ __ (_) | || | / \ | |_) / _ \ / __| |/ / '_ \| | | || |_ / _ \ | _ < (_) | (__| <| |_) | | |__ _/ ___ \ |_| \_\___/ \___|_|\_\ .__/|_| |_|/_/ \_\ |_| Welcome to Armbian 21.05.2 Buster with bleeding edge Linux 5.12.6-rockchip64 System load: 2% Up time: 12 min Memory usage: 6% of 1.93G IP: 192.168.10.66 CPU temp: 42°C Usage of /: 15% of 15G RX today: Error: Unable to read database "/var/lib/vnstat/wg0": No such file or directory Merge "eth0+wg0" failed. Also have been checking vnstat to merge wg0 but did not succeed, perhaps one can give me a hand please? TiA! These are the adapters present: Spoiler rockpi-4a:~:# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 86:67:c3:ba:43:ca brd ff:ff:ff:ff:ff:ff inet 192.168.10.66/24 brd 192.168.10.255 scope global dynamic noprefixroute eth0 valid_lft 3318sec preferred_lft 3318sec 3: wg0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN group default qlen 1000 link/none
Solution dolphs Posted June 2, 2021 Author Solution Posted June 2, 2021 looks like this helped in the end: " rockpi-4a:~:# vnstat -i wg0 --update " Spoiler Error: Unable to read database "/var/lib/vnstat/wg0": No such file or directory Info: -> A new database has been created.
Igor Posted June 3, 2021 Posted June 3, 2021 Nice catch. I have mitigated this problem this way: https://github.com/armbian/build/pull/2839/files and remove combinations at the end since i didn't find a better way https://github.com/armbian/build/pull/2848/files Well, all this has to be done automagically ...
Recommended Posts