KERNEL_CONFIGURE ignore my .config

[kentAVR]

I want configure kernel using ArmbianMini2.config

I build armbian with KERNEL_CONFIGURE=yes

When menuconfig ask me about settings there are nothing about CONFIG_BMP280. But in my ArmbianMini2.config i set

CONFIG_BMP280=n

In Linux menuconfig after loading ArmbianMini2.config and save armbian rename ArmbianMini2.config to ArmbianMini2.config.old.

I look at ArmbianMini2.config.old

CONFIG_BMP280=n

I look at ArmbianMini2.config or build/output/config/linux-rockchip64-current.config

CONFIG_BMP280=m

 

How it can be? There are also a lot of options where =n transform to =m...

 

ArmbianMini2.config ArmbianMini2.config.old linux-rockchip64-current.config

[Werner]

Official docs are here:https://docs.armbian.com/

Did you try to save your config after altering with default name? .config to say?

[kentAVR]

On 7/3/2021 at 9:11 PM, Werner said:

Official docs are here:https://docs.armbian.com/

Did you try to save your config after altering with default name? .config to say?

menuconfig is strange magic!

 

Look!

 

1) I set my settings of kernel.

2) I save my settings of kernel to file /home/a/Documents/myArmbians/8armbian/linux-rockchip64-current.config

3) I load settings from /home/a/Documents/myArmbians/8armbian/linux-rockchip64-current.config

4) I verify settings and its ok

5) I do Exit, armbian save my settings (and block file) and write me

[ o.k. ] Exporting new kernel config [ /home/a/Documents/myArmbians/8armbian/build/output/config/linux-rockchip64-current.config ]

6) I am going to file from 5) and verify and... My settings is reseted! WTF?
 

So right magic way is:

1) I set my settings of kernel.

2) I save my settings of kernel to file /home/a/Documents/myArmbians/8armbian/linux-rockchip64-current.config

3) Exit and STOP (Ctrl+Z) armbian build system.

4) put file from step 2) to /home/a/Documents/myArmbians/8armbian/build/userpatches/linux-rockchip64-current.config

5) wating message from armbian

[ o.k. ] Exporting new kernel config [ /home/a/Documents/myArmbians/8armbian/build/output/config/linux-rockchip64-current.config ]

6) do not stop build! Just go to this file and verify. Usually it contains my settings.

 

P.S. I use Orange Pi 4B