NanoPi Neo Core USBs dont work and bad DTB


 Share

1 1

Recommended Posts

Armbianmonitor:

Good morning,
I have a NanoPi Neo core where I am trying to use the usb ports (USB1, USB2 and USB3), the first thing to say is that all usbhost is active in armbian-config. The system does not recognize me anything in any of the 3, not a pendrive, or Wi-Fi or anything.

If I go to armbian-config, I see that the DTB system that has loaded is that of the NanoPi air, I do not know if it can influence.
USB devices receive power when connected.
Any idea if I have to activate something else or modify the DTB or something?

I have tried adding to armbianEnv.txt

this line at the end

fdtfile = sun8i-h3-nanopi-neo.dtb

but nothing.

Thanks and best regards!

image.png.401693d93f27f95bee894f7d59f50db4.png

Link to post
Share on other sites

Donate and support the project!

2 hours ago, MastinZgZ said:
Armbianmonitor:

The system does not recognize me anything in any of the 3, not a pendrive, or Wi-Fi or anything.

 

The system DOES see your USB-WiFi-Stick:
 

### lsusb:

Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

 

Do you got the Base-Board for the Neo Core or how do you wire the USB-Ports to the Core? Do you have a picture or diagram how do you donnect the devices? I "only" got a Core2 (H5) with Baseboard.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

1 1