Jump to content

Recommended Posts

Posted
  • Board Dimensions: 90mm x 122mm x 16mm
  • Heatsink Dimensions: 100mm x 123mm x 19mm
  • Weight: 253 g including heatsink
  • Rockchip RK3568 Processor
    • L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor
    • L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor
    • L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.992GHz)
    • ARMv8-A architecture with Neon and Crypto extensions
    • Mali-G52 MP2 GPU with 4 x Execution Engines (650Mhz)
  • 0.8Tops@INT8, integrated high-performance AI accelerator RKNN NPU
    • Supports one-click switching of Caffe/TensorFlow/TFLite/ONNX/PyTorch/Keras/Darknet
  • 4 or 8GiB LPDDR4 with 32-bit bus width memory
    • Data rate: 3120 MT/s, up to 1,560MHz
  • 1 x eMMC slot
  • 1 x Micro SD slot (DS/HS mode up to UHS-I SDR104)
  • 1 x NVME M.2 SSD (PCIe 3.0 x 2)
  • 1 x SATA3.0
  • 1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps)
    • Realtek RTL8211F (Ethernet transceiver)
    • LED indicators
    • Green LED: Flashing by data traffics at 100Mbps connection
    • Amber LED: Flashing by data traffics at 1000Mbps connection
  • 1 x HDMI 2.0 (up to 4K@60Hz with HDR, EDID)
  • 1 x MIPI-DSI (works with 800 x 1280 LCD)
  • 1 x 3.5mm phone jack
  • 1 x mono speaker output
  • 1 x HDMI sound
  • 2 x USB 2.0 host port
  • 2 x USB 3.0 host port (or 1 x USB 3.0 host + 1 x USB 2.0 OTG port)
  • 1 x Debug serial console (UART, 1.5Mbps N81)
  • 1 x SATA Connector
  • 1 x MIPI-CSI Camera Interface (15 pin)
  • 1 x MIPI-DSI LCD Interface (31 pin)
  • 1 x 40pin GPIO header
  • IR receiver for remote controller
  • RTC and backup battery holder (to keep time and date for several months without main power input)
  • System LED Indicators:
    • Red (POWER) – Solid light when DC power is connected
    • Blue (ALIVE) – Flashing “heartbeat” while Kernel is running. Solid On when in the u-boot stage.
  • 1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm
  • DC input : 7.5V ~ 15.5V
    • DC 12V/2A power adapter is recommended
    • IDLE : ≃ 1.25W
    • CPU Stress : ≃ 4.44W (Performance governor)
    • Power Off : ≃ 0W

 

https://www.hardkernel.com/shop/odroid-m1-with-8gbyte-ram/

  • Igor unpinned this topic
Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines