Clive Posted June 1, 2022 Posted June 1, 2022 Hi. I have an Orange PI Zero 2 It displays fine on a normal TV through HDMI but on the waveshare there is no display at all. The waveshare display works fine on the HDMI output of my Windows PC. I have chased my tail for 2 weeks looking for a solution but can't get it to work. If you can please point me in the right direction I would really appreciate it. https://www.waveshare.com/wiki/4inch_HDMI_LCD Thank You
Werner Posted June 1, 2022 Posted June 1, 2022 Providing logs with armbianmonitor -u helps with troubleshooting and significantly raises chances that issue gets addressed.
Clive Posted June 15, 2022 Author Posted June 15, 2022 I connected the HDMI display, booted and ran the diagnostics... Wishing you all the best and thanks. System diagnosis information will now be uploaded to http://ix.io/40cy Please post the URL in the forum where you've been asked for.
cluckly Posted June 28, 2022 Posted June 28, 2022 (edited) I have a waveshre 7inch 1024x600 hdmi display which is not working on rockpi 4b+ too. System diagnosis information is at http://ix.io/415G the spec of the display: https://www.waveshare.com/wiki/7inch_HDMI_LCD_(C) Edited June 28, 2022 by cluckly append LCD spec link
Werner Posted June 28, 2022 Posted June 28, 2022 6 minutes ago, cluckly said: I have a waveshre 7inch 1024x600 hdmi display which is not working on rockpi 4b+ too. System diagnosis information is at http://ix.io/415G Hi, besides the fact that you are using a different board take note that you are using either a user-built or unofficial image which issues may not receive any attention.
cluckly Posted June 28, 2022 Posted June 28, 2022 13 minutes ago, Werner said: Hi, besides the fact that you are using a different board take note that you are using either a user-built or unofficial image which issues may not receive any attention. Hi Werner, I'll try the offical image first. Thanks a lot. Best Regards, Cluckly
Recommended Posts