pistacik Posted January 14, 2017 Share Posted January 14, 2017 Hallo, I use Armbian for some time now, usually I can solve all problems myself. Recently, one of my boards has gone bad (or mad?). I started using this particular board on 10/11/2016. Installed Armbian (5.20) from images available on that day. Everything went nice, no problems, pretty much no load for whole days. On 20/12/2016 something began to use 1 core of CPU. No idea what. On 23/12/2016 board stopped responding completely. I haven't accessed/used system from 20/12/2016 so I was not aware of problem. I turned it off later. I removed SD card from board and used with other OrangePi One just fine. But this board behaves strange. I re-installed Armbian and it seems to work. Sort-of. cfinteractive plus watchdog consume 100 percent of CPU (I mean 1 core). dmesg - after boot first 4 messages are "wait hard syn message time out" followed by plenty of "hw message queue fifo full timeout" Only thing I manage to google is source code related to these messages. [ 109.080018] [ARISC ERROR] :wait hard syn message time out [ 109.080036] [ARISC ERROR] :message addr : f004b840 [ 109.080046] [ARISC ERROR] :message state : 2 [ 109.080054] [ARISC ERROR] :message attr : 2 [ 109.080062] [ARISC ERROR] :message type : 30 [ 109.080070] [ARISC ERROR] :message result : 0 [ 113.080021] [ARISC ERROR] :hw message queue fifo full timeout [ 113.080041] [ARISC ERROR] :message addr : f004b840 [ 113.080050] [ARISC ERROR] :message state : 2 [ 113.080058] [ARISC ERROR] :message attr : 2 [ 113.080066] [ARISC ERROR] :message type : 30 [ 113.080074] [ARISC ERROR] :message result : 0 I'll gladly provide additional information. Only strange ting hardware-wise I noticed: black plastic on pin headers seems to pull pins together and thus bend board slightly, but noticeably. So I removed plastic with pliers just to relieve board from unnecessary stress. I did that with all of my Oranges (Ones, PCs). Boards are definitely straighter. Is this OPI One FUBAR? How could that happen? Link to comment Share on other sites More sharing options...
Recommended Posts