20USD 4GRAM RK3528 host (cheap dq08 tvbox)

[fensoft]

What you need:
- A DQ08 (got mine from aliexpress)
- An sdcard (4g if you want to use external usb3 ssd or 32g if not)

 

If you're lazy and trust my image (you shouln't, as I can bundle malwares inside):
- flash this using this - usb2serial included
- put in DQ08 and plug it in ethernet
- scan for the ip using this
- in windows terminal, using password=1234:

ssh root@BOXIP

To build the sd card, i've used this tutorial:
- install wsl on your windows
- apply this patch

 

Spoiler

sudo wget --output-document=/usr/share/keyrings/armbian-next.gpg https://apt-test.next.armbian.com/armbian-next.gpg
cat << EOD | sudo tee /etc/apt/sources.list.d/armbian-next.list
deb [signed-by=/usr/share/keyrings/armbian-next.gpg] http://apt-test.next.armbian.com armbian main
deb [signed-by=/usr/share/keyrings/armbian-next.gpg] http://apt-test.next.armbian.com armbian-$(lsb_release -cs) main
EOD
sudo apt update && sudo apt list --upgradable | grep  -i armbian

- open wsl shell
- install docker on wsl:

curl -fsSL get.docker.com | sh

- run docker:

sudo /etc/init.d/docker start

- permit to use docker:

sudo usermod -aG docker $USER

- open a new shell (important)
- follow this

Spoiler

 

git clone https://github.com/ilyakurdyukov/rk3528-tvbox.git
cd rk3528-tvbox
git clone --depth=1 https://github.com/armbian/build armbian-build
cp -R armbian-patch/* armbian-build/
cd armbian-build
./compile.sh build BOARD=rk3528-tvbox BRANCH=legacy BUILD_DESKTOP=no BUILD_MINIMAL=yes EXPERT=yes KERNEL_CONFIGURE=no KERNEL_GIT=shallow RELEASE=bookworm
cd ../..
cat <<EOF > rk3528-tvbox/build.sh
#!/bin/bash
cd /build
IMAGE=\`ls /build/armbian-build/output/images/*.img\`
losetup -D
losetup --partscan /dev/loop0 \$IMAGE
mount /dev/loop0p1 /mnt
cd devicetree
cp orig/*.dtsi .
patch -p1 -i rk3528-tvbox.patch
make NAME=rk3528-vontar-dq08 PRESET=LINUX
cp rk3528-vontar-dq08.dtb /mnt/dtb/rockchip
sed "s#fdtfile=.*#fdtfile=rockchip/rk3528-vontar-dq08.dtb#" -i /mnt/armbianEnv.txt
losetup -D
cat \$IMAGE | gzip > /build/\`basename \$IMAGE\`.gz
EOF
chmod a+x rk3528-tvbox/build.sh
docker run -it -v /dev:/dev --privileged=true -v `pwd`/rk3528-tvbox:/build --rm armbian.local.only/armbian-build:initial /build/build.sh

 

- flash the img file found in Linux/Ubuntu/home/XXX/armbian-build/output/image using this
- put in DQ08 and plug it in ethernet
- scan for the ip using this
- in windows terminal, using password=1234:

ssh root@BOXIP

 

If, like me, you want to use an USB3 SSD:
- flash the usb3 drive with the same image
- plug to the box
-

e2label /dev/sda2 ssd

- change /boot/armbianEnv.txt:

rootdev=LABEL=ssd

- reboot
- check free size with:

df -h /

- optional: remove unused boot partition:

fdisk /dev/sda

+ d + 1 + w + q
- optional: remove unused data partition:

fdisk /dev/mmcblk0

+ d + 2 + w + q

 

If, like me, you have usb2serial adapters:
- follow this but remove all parameters at the end of

./compile.sh build

and during kernel configuration, enable this: Device Drivers -> USB Support -> USB Serial Converter Support -> FTDI and PL230x

Edited April 11 by fensoft

[SteeMan]

Please do not promote forks of Armbian on these forums.  If you what to help Armbian, please submit PRs and contribute code that makes Armbian better.  It doesn't help to have yet another fork of stuff out there that never gets contributed back.

 

Your warning about using external builds applies equally well to external git sources.  No one should trust this unless they inspect all the changes you have made from genuine Armbian.  User be warned.

[fensoft]

do you want me to remove all binaries ?

 

about tvbox in the genuine armbian, i'm pretty sure that i've read somewhere armbian would not support them

Edited April 11 by fensoft

[SteeMan]

They aren't officially supported, but there are many TV boxes that are Community Maintained and available on the Armbian download page.

 

No need to remove the binaries, your warnings are good enough.

[Hqnicolas]

@fensoft congratulations for your work, please stop acting like you dont live in society. Just do it in a PR. Or Compile 30x backdoor images to US.

Edited April 12 by Hqnicolas

[Shinjin]

Is it possible to install Armbian into internal memory without jumping though hoops?

[fensoft]

On 4/12/2024 at 7:02 AM, Hqnicolas said:

please stop acting like you dont live in society. Just do it in a PR. Or Compile 30x backdoor images to US.

Toxicity level over 9000, you better keep it for yourself next time.

 

About PR, I can't and dont want. It's not my patch. Feel free to do it yourself if it's so important.

[fensoft]

22 minutes ago, Shinjin said:

Is it possible to install Armbian into internal memory

If I understand well, boot loader is at the begining of the emmc. Doing armbian-install will probably ends with system not booting anymore.

[Shinjin]

Yes, but AFAIK on other TV boxes an internal install shouldn't touch vital portions of the emmc.

And Rockchip devices should still boot from SDCARD?

 

 

 

[fensoft]

I have the original software from vendor if needed. But, as I dont trust internal emmc, I never tried.

[Hqnicolas]

57 minutes ago, fensoft said:

I dont trust internal emmc

I have done the internal EMMC armbian and I dont trust this EMMC too...

Edited April 13 by Hqnicolas