Jump to content

Offcial images dont boot


Recommended Posts

I lost whole day yesterday to try boot with new images from Armbian download page - kernel 6.1 / kernel 6.8 bookworm/trixi and none boots...

If I take Ubuntu or Debian image I have no problem to boot from.

Do you have the same?

Link to comment
Share on other sites

I tried a few images and I wasn't able to use only the 6.8.10/11 because of video issues. All the others with kernel 6.1 worked fine. Maybe you're using the non-plus version of the images?

Link to comment
Share on other sites

8 hours ago, ricardo_brz said:

doesn't look like it's Armbian.

Because it isn't. That is some other people's work.

OP most likely used wrong image.

Link to comment
Share on other sites

how exactly are you writing to the SD card? I just did it today with Gnome Image Writer and it worked without any issue. The image I used was https://mirror-us-stl1.armbian.airframes.io/dl/orangepi5-plus/archive/Armbian_24.5.1_Orangepi5-plus_noble_vendor_6.1.43_gnome-oibaf_desktop.img.xz

 

There is no need to unpack. Right click -> open with Image Writer -> select destination (SD card) -> wait until the process finishes -> boot with SD card -> setup Armbian -> start using.

Link to comment
Share on other sites

For me all Armbian images stop after that:

 

DDR Version V1.08 20220617
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
Manufacturer ID:0x6
CH0 RX Vref:30.7%, TX Vref:21.8%,20.8%
CH1 RX Vref:31.7%, TX Vref:23.8%,22.8%
CH2 RX Vref:30.7%, TX Vref:21.8%,20.8%
CH3 RX Vref:31.7%, TX Vref:21.8%,21.8%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-orangepi (Jun 01 2023 - 11:41:40)
Trying to boot from MMC1
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(806278dba1...) + OK
## Checking uboot 0x00200000 ... sha256(cc23d8931f...) + OK
## Checking fdt 0x00311f08 ... sha256(d2dda3ef7c...) + OK
## Checking atf-2 0x000f0000 ... sha256(c00c7fd75b...) + OK
## Checking atf-3 0xff100000 ... sha256(71c3a5841b...) + OK
## Checking atf-4 0xff001000 ... sha256(2301cf73be...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 920.859 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-405-gb52c2eadd:derrick.huang
NOTICE:  BL31: Built : 11:23:47, Aug 15 2022
INFO:    spec: 0x1
INFO:    ext 32k is valid

 

Link to comment
Share on other sites

  • Werner locked this topic
Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines