technik007_cz Posted November 16, 2015 Share Posted November 16, 2015 Hi, I tried update/repair kernel on cubietruck today. I have /dev/sda1 on / type ext4 (rw... and /dev/nand1 on /mnt type vfat (rw) and I am running Ubuntu on this board. I entered command below as root: wget -q -O - http://upgrade.armbian.com | bash Last messages on screen: NAND install Converting and copying kernel. mkimage: Can't open /boot/zImage: No such file or directory Visit: forum.armbian.com in case of troubles or just for fun Link to comment Share on other sites More sharing options...
Igor Posted November 16, 2015 Share Posted November 16, 2015 Hmm, update while installed on /dev/sda seems to cause troubles. Other scenarios works. If you haven't rebooted, I think you will need to install kernel+uboot+dtbs+roots via apt-get metod I am working on this solution. Link to comment Share on other sites More sharing options...
technik007_cz Posted November 16, 2015 Author Share Posted November 16, 2015 No worries. I plugged microSD card what I am still keeping after transfer system to sda drive and I cubietruck is back running. I am going to repair boot stuff when I will have more time. Link to comment Share on other sites More sharing options...
Igor Posted November 18, 2015 Share Posted November 18, 2015 (edited) I made a script rework today and now it's much better and if it can't do the work it exits before doing any damage. Edited November 23, 2015 by Igor fix video link Link to comment Share on other sites More sharing options...
technik007_cz Posted November 23, 2015 Author Share Posted November 23, 2015 I tested your new script on same setup like before but with Jessie running and kernel 3.4.XXX. I can only confirm it works now ! Thank you for your effort Igor ! 1 Link to comment Share on other sites More sharing options...
Recommended Posts