Rencat Posted September 30 Posted September 30 I have connected USB 3.0 4 port hub to the type c of my radxa zero 3E but lsusb -t shows the hub is only on USB 2.0 as 480M. /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M and lsusb output Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub i checked the same hub with my windows labtop i was able to achieve USB 3.0 read and write speeds. kindly guide me how to make the hub detect as USB 3.0 on armbain debian 12 Bookworm Server. 0 Quote
Werner Posted September 30 Posted September 30 Providing logs with armbianmonitor -u helps with troubleshooting and significantly raises chances that issue gets addressed. 0 Quote
Rencat Posted September 30 Author Posted September 30 https://paste.armbian.com/zajugozolo kindly check above link for the log 0 Quote
NixiElectra Posted October 3 Posted October 3 (edited) I'm also face the same issue with USB Gigabit Ethernet on Zero 3W. https://paste.armbian.com/ozatawamaf Edited October 3 by NixiElectra 0 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.