Jump to content

Recommended Posts

Posted (edited)

At the same time as mmcblk1 disappeared someone had changed the ethernet port over to the secondary port as I could not get into the machine and tried the second port which had been configured to the same static IP address as the primary port was on.  

Edited by AaronNGray
Posted

Hi @AaronNGray,

Did you check if there is indeed an SD card inserted? If so, try to remove it then re-insert it while the system has booted.

Also, seems that you have an NVMe storage device attached, on which the OS was installed - not the SD card as you mentioned?

 

As @laibsch mentioned, the eMMC is detected and available as /dev/mmcblk0, but seems that SD card is not seen (if it was inserted).

 

Grt,

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines