Jump to content

No sound card detected


OpenglMan

Recommended Posts

Hello,

 

I have just built an image with the default parameters of the Lime A20 board. It seems that the system does not detect any sound card.

 

aplay -l

aplay: device_list:268: no soundcards found...

 

uname -a

Linux lime 4.13.6-sunxi

 

lsmod

Module Size Used by

cfg80211 376832 0

rfkill 20480 1 cfg80211

sun4i_gpadc_iio 16384 0

evdev 20480 1

at24 16384 0

sun4i_ts 16384 0

sun4i_gpadc 16384 0

nvmem_sunxi_sid 16384 0

sun4i_ss 24576 0

uio_pdrv_genirq 16384 0

uio 16384 1 uio_pdrv_genirq

 

As you can see above, there is no module related to sound.

 

If i use the same SD card with this image built in a Cubieboard2, i get the same error.

 

Any advice would be greatly appreciated,

 

Thanks in advance.

 

 

Link to comment
Share on other sites

Hello Igor, 

 

According to the previous link, i add the following code segment to the dts :

&codec { status = "okay"; };

 

The dts file is located in: 

build/cache/sources/linux-mainline/linux-4.13.y/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts

 

After that, i run compile.sh , but if i check the dts file again, i can't see the code segment that i added. 

 

So, how can i modify the device tree of the lime board or any other board?  (mainline kernel)

 

Thank you very much in advance

Link to comment
Share on other sites

51 minutes ago, OpenglMan said:

After that, i run compile.sh , but if i check the dts file again, i can't see the code segment that i added. 

 

A source is checked out by default. You need to switch to "edit" mode. CREATE_PATCHES=yes ...  

https://docs.armbian.com/Developer-Guide_Build-Options/

 

This will prompt you to make changes to the source code. Then you make them. After you are done, return and press ENTER. This will also create a patch in output/patches ... which you can move later to appropriate userpatches directory or submit upstream.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines