iMX8MP-SOM-4GB-IND/

[Sam Rossiter]

For this board https://www.olimex.com/Products/SOM/NXP-iMX8/iMX8MP-SOM-4GB-IND/open-source-hardware

 

It looks like Olimex have forked Armbian-build and done the board bringup: https://github.com/OLIMEX/imx8mp-build/commit/a3cb5ad2710cd3edf6a4c6c067b049af48b03fa5#diff-1b53368896f4902ddbb5db1fa206835ccbb04445cd8bcaa5fef353655794665a

 

How could I bring that code back into the main https://github.com/armbian/build/tree/main

 

I think I need to rebase the Olimex fork back to the main Armbian Repo?

 

Or should I fork the Armbian repo and then re-apply the Olimex changes to the fork?

[Igor]

1 hour ago, Sam Rossiter said:

I think I need to rebase the Olimex fork back to the main Armbian Repo?

Recommended. It looks like its not that far away.
 

1 hour ago, Sam Rossiter said:

Or should I fork the Armbian repo and then re-apply the Olimex changes to the fork?

With rebase you will see the diff and if this is all you need to apply.

[Sam Rossiter]

I looked at this for an hour and unfortunately can't figure it out.

 

It seems that Olimex didn't 'fork' from Armbian, instead did something else to make their clone of your code.

Edited 1 hour ago by Sam Rossiter
typo