Ilya Tulupov Posted November 16, 2017 Share Posted November 16, 2017 Hi everybody, just downloaded Armbian_5.30_Orangepizero_Ubuntu_xenial_default_3.4.113 and flashed. I can see "orangepizero" in network, also ip is pingable but ssh port is closed. Is it a known issue? Armbian_5.30_Orangepizero_Debian_jessie_default_3.4.113 from archive works fine. Thanks Link to comment Share on other sites More sharing options...
Den1982 Posted November 26, 2017 Share Posted November 26, 2017 (edited) Same problem. But I have lost not only ssh but ping too. This occurs after the expiration of the lease time of IP address. If I increase the lease time of IP addresses on my zyxel keenetic router, then increasing the time availability of the device on the network. But maximum lease time is 259200... This problem only ubuntu, but on debian it's all ok. PS. Forgot to add. This problem occurs after you reboot the system first time. Before initial configuration - ping is ok and ssh available at any time. Edited November 26, 2017 by Den1982 Link to comment Share on other sites More sharing options...
Igor Posted November 26, 2017 Share Posted November 26, 2017 On 16. 11. 2017 at 5:29 AM, Ilya Tulupov said: Armbian_5.30_Orangepizero_Ubuntu_xenial_default_3.4.113 Tested and works out of the box, check your router settings, cables, ... First boot: http://sprunge.us/jOIZ After apt update and upgrade: http://sprunge.us/WNYI After switching to next 4.13.16 kernel (armbian-config -> system -> alternative kernels -> next): http://sprunge.us/Igfc I would start reading here:https://docs.armbian.com/User-Guide_Getting-Started/ https://forum.armbian.com/forum/31-sd-card-and-power-supply/ Link to comment Share on other sites More sharing options...
zador.blood.stained Posted November 26, 2017 Share Posted November 26, 2017 If I remember correctly older images didn't have a required package installed (iputils-arping) so NM failed to renew a DHCP lease, though the initial lease was obtained correctly. https://github.com/armbian/build/commit/b971b10f24bdf869b2d7ed52db9c14f5d3012d26 1 Link to comment Share on other sites More sharing options...
Igor Posted November 26, 2017 Share Posted November 26, 2017 Huh. I tried with the reported image and it worked for me out of the box. Link to comment Share on other sites More sharing options...
zador.blood.stained Posted November 26, 2017 Share Posted November 26, 2017 7 minutes ago, Igor said: Huh. I tried with the reported image and it worked for me out of the box. Did you let it run for more than 24 hours? And did you check the syslog for NM complaining about arping missing? 1 Link to comment Share on other sites More sharing options...
Den1982 Posted November 26, 2017 Share Posted November 26, 2017 1 hour ago, zador.blood.stained said: If I remember correctly older images didn't have a required package installed (iputils-arping) so NM failed to renew a DHCP lease, though the initial lease was obtained correctly. https://github.com/armbian/build/commit/b971b10f24bdf869b2d7ed52db9c14f5d3012d26 apt-get install iputils-arping iputils-arping is already the newest version (3:20121221-5ubuntu2) Link to comment Share on other sites More sharing options...
Recommended Posts