orangepi5b : Armbian_25.11.1_Orangepi5-plus_trixie_current_6.12.58_minimal.img does not boot

[Jean-Marc]

Dear team,

On Armbian_25.11.1_Orangepi5-plus_trixie_current_6.12.58_minimal.img
not possible to boot kernel, only u-boot seems available ?

Bellow is the debug log on tty

DDR V1.13 25cee80c4f cym 23/08/11-09:31:58
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB
Manufacturer ID:0xff
CH0 RX Vref:28.5%, TX Vref:22.8%,21.8%
CH1 RX Vref:27.1%, TX Vref:21.8%,21.8%
CH2 RX Vref:27.9%, TX Vref:21.8%,21.8%
CH3 RX Vref:28.5%, TX Vref:20.8%,20.8%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-orangepi (Nov 15 2023 - 16:53:25)
Trying to boot from MMC1
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(7612223b82...) + OK
## Checking u-boot 0x00a00000 ... sha256(e17d8b540a...) + OK
## Checking fdt-1 0x00ad1370 ... sha256(5411c775cf...) + OK
## Checking atf-2 0x000f0000 ... sha256(b2af21b504...) + OK
## Checking atf-3 0xff100000 ... sha256(70505bb764...) + OK
Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000)
Total: 719.759 ms

 

....and nothing 

 

I also changed the verbosity level in /boot/armbianEnv.txt, but
without success!

Thanks in advance for your help

[Werner]

moved to staging

[Werner]

wrong image. you cannot simply use an image for board X and assume it works on board Y