Bleedingedge 7.1 rc2 usb problems

[j0ta]

Connecting a usb keyboard doesn't seem to work with 7.1  ..

 

[    2.836541] usb 7-1: new full-speed USB device number 2 using ohci-platform
[    3.024538] usb 7-1: device descriptor read/64, error -62
[    3.304535] usb 7-1: device descriptor read/64, error -62
[    3.596542] usb 7-1: new full-speed USB device number 3 using ohci-platform
[    3.780527] usb 7-1: device descriptor read/64, error -62
[    4.076543] usb 7-1: device descriptor read/64, error -62
[    4.180566] usb usb7-port1: attempt power cycle
[    4.372529] usb 7-1: new full-speed USB device number 4 using ohci-platform
[    4.780541] usb 7-1: device not accepting address 4, error -62
[    4.964529] usb 7-1: new full-speed USB device number 5 using ohci-platform
[    5.372526] usb 7-1: device not accepting address 5, error -62
[    5.372569] usb usb7-port1: unable to enumerate USB device

 

[Werner]

must be specific to this board. rock-3a which also uses RK3568 is not affected.

btw. bleedingedge is intended to be used by developers only since breakage just like you noticed, is very much expected.

[j0ta]

No problem, just to let you guys know

Everything else is working

 

Cheers !

[Werner]

Providing logs with 

armbianmonitor -u

 helps with troubleshooting and significantly raises chances that issue gets addressed.

[j0ta]

blank

Edited 13 minutes ago by j0ta

[Werner]

Hm does not contain 7.1.0 dmesg boot log

[j0ta]

Maybe because it's a "zombie" system with systemd removed and the monitor tools fails to address

 

Here's the dmesg of current system

 

https://paste.armbian.com/zuyaxiwugo.yaml