Helios64 and 6.18.35 Ko, with 6.18.10 Ok

[BipBip1981]

Hello everybody,

 

With 6.18.10-current-rockchip64 and rk3399-kobol-helios64.dtb-6.18.18-opp dtb file, Ok

With 6.18.35-current-rockchip64 and overlay helios64 patch with armbian-config, Ko

With 6.18.35-current-rockchip64 and k3399-kobol-helios64.dtb-6.18.18-opp dtb file, Ko

 

The crash is random... sometime crash:

- At the boot with red system light blinking

- At the opening of my LUKS ciffers drives 

- At a high cpu load

- With nothing special, all led are blue, system blinking but network and ssh is Ko

 

Is it possible to explain me how to see the problem or how to have log because I am in blind to have more details ?

Is it possible to explain me how to pass to the last 6.18.36 kernel to seen if it is better than 6.18.35 ?

 

Thanks a lot.

Edited June 22 by BipBip1981

[IBV]

Hi,

take a look at the build doc:

 

https://docs.armbian.com/Developer-Guide_Build-Preparation/

 

You could try to build the kernel only, typically you get the latest version of the stable branch

 

./compile.sh kernel EXPERT="yes" BOARD=helios64 ARTIFACT_IGNORE_CACHE='yes' BRANCH=current

 

[BipBip1981]

Hi, thank, I forget this method.

new result... same with 6.18.37:

With 6.18.10-current-rockchip64 and rk3399-kobol-helios64.dtb-6.18.18-opp dtb file, Ok

With 6.18.37-current-rockchip64 and overlay helios64 patch with armbian-config, Ko

With 6.18.37-current-rockchip64 and k3399-kobol-helios64.dtb-6.18.18-opp dtb file, Ko

 

more information:

On "Cold Boot": System blink red

After "Reset": Same crash like without DTB on previous Kernel like 6.18.10...

 

I try edge with 7.1 kernel but not compile, finish with error during process. 

 

Back to 6.18.10 and freeze with this kernel for this time, I don't have time to investigate more at this time.

 

Have a nice day 

Edited 15 minutes ago by BipBip1981