martos 3 Report post August 11, 2018 I buy a V88 mini 3 (2G ram / 8G EMMC) for make the test of MPP api and use it in ffmpeg. ( because i must wait for the version with amlogic ) 1 Install Armbian 2 Checkp MPP 3 Compile last ffmpeg 4 Test So let's go ... 0 Share this post Link to post Share on other sites
martos Topic author 3 Report post August 11, 2018 For install with etcher write sd card with xenial-minimal-rock64-0.5.15-136-arm64.img.xz (not other ) with etcher write usb stick bionic-minimal-rock64-0.7.9-1067-arm64.img.xz (or better ) boot on sd witout usb stick delete partition 6 and 7 , reboot with usb stick, activate eth1 ( all explain in the post off segv ) i continue ... 0 Share this post Link to post Share on other sites
martos Topic author 3 Report post August 11, 2018 first step cd ~/ mkdir -p ~/ffmpeg_sources ~/bin sudo apt-get update -qq && sudo apt-get -y install \ autoconf \ automake \ build-essential \ cmake \ git-core \ libass-dev \ libfreetype6-dev \ libsdl2-dev \ libtool \ libva-dev \ libvdpau-dev \ libvorbis-dev \ libxcb1-dev \ libxcb-shm0-dev \ libxcb-xfixes0-dev \ pkg-config \ texinfo \ wget \ zlib1g-dev \ yasm \ libx264-dev \ libx265-dev \ libnuma-dev \ libvpx-dev \ libfdk-aac-dev \ libmp3lame-dev \ libopus-dev \ mc \ locate cd ~/ffmpeg_sources && \ wget https://www.nasm.us/pub/nasm/releasebuilds/2.13.03/nasm-2.13.03.tar.bz2 && \ tar xjvf nasm-2.13.03.tar.bz2 && \ cd nasm-2.13.03 && \ ./autogen.sh && \ PATH="$HOME/bin:$PATH" ./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" && \ make -j4 && \ make install the famous HW video decoderapt install librockchip-mpp-dev aom cd ~/ffmpeg_sources && \ git -C aom pull 2> /dev/null || git clone --depth 1 https://aomedia.googlesource.com/aom && \ mkdir aom_build && \ cd aom_build && \ PATH="$HOME/bin:$PATH" cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$HOME/ffmpeg_build" -DENABLE_SHARED=off -DENABLE_NASM=on ../aom && \ PATH="$HOME/bin:$PATH" make -j4 && \ make install 0 Share this post Link to post Share on other sites
martos Topic author 3 Report post August 11, 2018 final : cd ~/ffmpeg_sources && \ wget -O ffmpeg-snapshot.tar.bz2 https://ffmpeg.org/releases/ffmpeg-snapshot.tar.bz2 && \ tar xjvf ffmpeg-snapshot.tar.bz2 && \ cd ffmpeg && \ PATH="$HOME/bin:$PATH" PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig" ./configure \ --prefix="$HOME/ffmpeg_build" \ --pkg-config-flags="--static" \ --extra-cflags="-I$HOME/ffmpeg_build/include" \ --extra-ldflags="-L$HOME/ffmpeg_build/lib" \ --extra-libs="-lpthread -lm" \ --bindir="$HOME/bin" \ --enable-hardcoded-tables \ --enable-gpl \ --enable-libaom \ --enable-libass \ --enable-libfdk-aac \ --enable-libfreetype \ --enable-libmp3lame \ --enable-libopus \ --enable-libvorbis \ --enable-libvpx \ --enable-libx264 \ --enable-rkmpp \ --enable-version3 \ --enable-libdrm \ --enable-libx265 \ --enable-nonfree && \ PATH="$HOME/bin:$PATH" make -j4 && \ make install && \ hash -r now waiting ... it could be long ... 0 Share this post Link to post Share on other sites
martos Topic author 3 Report post August 11, 2018 compile OK Very slow with my usb stick ... (my sd is 3x more faster ) Now test ! 0 Share this post Link to post Share on other sites
martos Topic author 3 Report post August 11, 2018 so test : Software transcoding /home/rock64/bin/ffmpeg -vcodec h264 -i http://192.168.1.50:8001/+1:0:19:401:4:20FA:EEEE0000:0:0:0 -s 320x240 /tmp/test.avi resut = frame= 507 fps= 16 q=8.6 Lsize= 1058kB time=00:00:22.40 bitrate= 386.8kbits/s dup=0 drop=6 speed=0.703x Hardware Transcoding (only decode ) /home/rock64/bin/ffmpeg -vcodec h264_rkmpp -i http://192.168.1.50:8001/+1:0:19:401:4:20FA:EEEE0000:0:0:0 -s 320x240 /tmp/test.avi error = 0 Impossible to convert between the formats supported by the filter 'Parsed_null_0' and the filter 'auto_scaler_0' Error reinitializing filters! Failed to inject frame into filter network: Function not implemented tested with some otehr file with ame result OK, i must find ... 0 Share this post Link to post Share on other sites
martos Topic author 3 Report post August 12, 2018 I think we loose something , a reference somewhere ( avlibxxx ) . I see some guy with same trouble witout reply . In my opinion i could retry but with compiling librockchip-mpp-dev and, of course, no doc on this ... So i ask to the dev ... 0 Share this post Link to post Share on other sites
martos Topic author 3 Report post August 12, 2018 wotks with : ffmpeg -hwaccel drm -hwaccel_device /dev/dri/card0 -c:v h264_rkmpp -i Sintel_Trailer.720p.DivX_Plus_HD.mkv -f null - -benchmark result = frame= 431 fps=174 q=-0.0 Lsize=N/A time=00:00:18.21 bitrate=N/A speed=7.35x !!! speed=7.35x !!! 0 Share this post Link to post Share on other sites
martos Topic author 3 Report post August 12, 2018 Source file ::https://download.blender.org/durian/movies/Sintel.2010.720p.mkv works with :: ffmpeg -hwaccel drm -hwaccel_device /dev/dri/card0 -c:v h264_rkmpp -i Sintel_Trailer.720p.DivX_Plus_HD.mkv -f null - -benchmark don't work with :: ffmpeg -hwaccel drm -hwaccel_device /dev/dri/card0 -c:v h264_rkmpp -i Sintel_Trailer.720p.DivX_Plus_HD.mkv /tmp/test.mkv error: [h264_rkmpp @ 0x55b3d47560] Decoder noticed an info change (1280x544), format=0 [h264_rkmpp @ 0x55b3d47560] Received a frame. [graph 0 input from stream 0:0 @ 0x55b3dd7190] Setting 'video_size' to value '1280x544' [graph 0 input from stream 0:0 @ 0x55b3dd7190] Setting 'pix_fmt' to value '181' [graph 0 input from stream 0:0 @ 0x55b3dd7190] Setting 'time_base' to value '1/1000' [graph 0 input from stream 0:0 @ 0x55b3dd7190] Setting 'pixel_aspect' to value '1/1' [graph 0 input from stream 0:0 @ 0x55b3dd7190] Setting 'sws_param' to value 'flags=2' [graph 0 input from stream 0:0 @ 0x55b3dd7190] Setting 'frame_rate' to value '24/1' [graph 0 input from stream 0:0 @ 0x55b3dd7190] w:1280 h:544 pixfmt:drm_prime tb:1/1000 fr:24/1 sar:1/1 sws_param:flags=2 [format @ 0x55b3ea6c00] Setting 'pix_fmts' to value 'yuv420p|yuvj420p|yuv422p|yuvj422p|yuv444p|yuvj444p|nv12|nv16|nv21' [auto_scaler_0 @ 0x55b3de8940] Setting 'flags' to value 'bicubic' [auto_scaler_0 @ 0x55b3de8940] w:iw h:ih flags:'bicubic' interl:0 [format @ 0x55b3ea6c00] auto-inserting filter 'auto_scaler_0' between the filter 'Parsed_null_0' and the filter 'format' Impossible to convert between the formats supported by the filter 'Parsed_null_0' and the filter 'auto_scaler_0' Error reinitializing filters! Failed to inject frame into filter network: Function not implemented Error while processing the decoded data for stream #0:0 [AVIOContext @ 0x55b3d3ba40] Statistics: 0 seeks, 0 writeouts [libvorbis @ 0x55b3ea7f00] 39 frames left in the queue on closing [AVIOContext @ 0x55b3d08120] Statistics: 66889 bytes read, 4 seeks 0 Share this post Link to post Share on other sites
martos Topic author 3 Report post August 12, 2018 works with copy : ffmpeg -hwaccel drm -hwaccel_device /dev/dri/card0 -c:v h264_rkmpp -i http://192.168.1.50:8001/+1:0:19:401:4:20FA:EEEE0000:0:0:0 -vcodec copy /tmp/test.mp4 so for kodi it's works but can't transcode ... If someone have an idea ... 0 Share this post Link to post Share on other sites
martos Topic author 3 Report post August 13, 2018 ok after open a ticket in mpp rockchip https://github.com/rockchip-linux/mpp/issues/49#issuecomment-412426759 with at the end the famous reply : "It is not us adding the support for ffmpeg." ok i open a ticket for ffmpeg https://trac.ffmpeg.org/ticket/7354#ticket wait and see ... 0 Share this post Link to post Share on other sites
martos Topic author 3 Report post August 13, 2018 I make a new install with new usb stick ( Transcend JetFlash 700 16GB ), Make all again, it's take less time ! so you need good usb stick. another news : ayufan have compiled a ffmpeg 3.4 with rkmpp ... so if you don't make compile you can just make apt install ffmpeg and you have a ffmpeg with Hardware Decode ... and gstreamer gstreamer1.0-rockchip1/bionic 1.10-5ayufan12 arm64 gstreamer1.0-rockchip1-extra/bionic 1.10-1 arm64 and kodi kodi/bionic 2:17.6+dfsg1-1ubuntu1 arm64 kodi-addons-dev/bionic 2:17.6+dfsg1-1ubuntu1 arm64 kodi-bin/bionic 2:17.6+dfsg1-1ubuntu1 arm64 kodi-data/bionic 2:17.6+dfsg1-1ubuntu1 all kodi-eventclients-common/bionic 2:17.6+dfsg1-1ubuntu1 all kodi-eventclients-dev/bionic 2:17.6+dfsg1-1ubuntu1 all kodi-eventclients-kodi-send/bionic 2:17.6+dfsg1-1ubuntu1 all kodi-eventclients-ps3/bionic 2:17.6+dfsg1-1ubuntu1 all kodi-eventclients-wiiremote/bionic 2:17.6+dfsg1-1ubuntu1 arm64 kodi-pvr-argustv/bionic 2.5.0+git20160923-3 arm64 kodi-pvr-dvbviewer/bionic 2.4.6+dfsg1-1 arm64 kodi-pvr-hdhomerun/bionic 2.4.2+git20160820-2build1 arm64 kodi-pvr-hts/bionic 3.4.13-1 arm64 kodi-pvr-iptvsimple/bionic 2.4.4+git20161211-1 arm64 kodi-pvr-mediaportal-tvserver/bionic 2.4.14+dfsg1-1build2 arm64 kodi-pvr-mythtv/bionic 4.12.12+dfsg1-1 arm64 kodi-pvr-nextpvr/bionic 2.4.7+git20161017-2 arm64 kodi-pvr-njoy/bionic 2.4.0+git20160518-2 arm64 kodi-pvr-vdr-vnsi/bionic 2.6.12-1 arm64 kodi-pvr-vuplus/bionic 2.4.12+dfsg1-1 arm64 kodi-pvr-wmc/bionic 1.4.4+git20160820-2 arm64 kodi-repository-kodi/bionic 2:17.6+dfsg1-1ubuntu1 all kodi-visualization-spectrum/bionic 1.1.1-1ubuntu2 arm64 libkodiplatform-dev/bionic 17.1.0-1 arm64 libkodiplatform16/bionic 17.1.0-1 arm64 0 Share this post Link to post Share on other sites
martos Topic author 3 Report post August 22, 2018 No news from the ffmpeg ticket, it could take 2 month before and dev read it ... 0 Share this post Link to post Share on other sites
hao 0 Report post August 29, 2018 May it support NVENC? 0 Share this post Link to post Share on other sites
Staars 9 Report post August 29, 2018 1 hour ago, hao said: May it support NVENC? NVENC = NVidia Encoder -> So the answer is No. 0 Share this post Link to post Share on other sites
JMCC 150 Report post August 29, 2018 If you just want to transcode anything, I recommend using Gstreamer instead, until the FFmpeg team adds encoding support for RKMPP (if that ever happens). Decoding works perfectly with Kodi and MPV, so far. You can also give a try to their incomplete VAAPI driver; it worked partially in the past, not sure whether it will work with recent kernels: http://rockchip.wikidot.com/rockchip-va-driver 0 Share this post Link to post Share on other sites
hao 0 Report post August 29, 2018 1 hour ago, Staars said: NVENC = NVidia Encoder -> So the answer is No. But Nvidia says that it support linux. I got it. But next, will its performance be better than NVENC? 0 Share this post Link to post Share on other sites
martos Topic author 3 Report post August 30, 2018 gstreamer is more powerfull to transcode BUT i can't use it in my project. ( gui for transcode flux mpeg from enigma2 receiver or tvheahend with low bandwith to external device : my cell phone) And put an nvidia in a TV boxe is very hard. I try it with pc with nvidia and it's works perfectly in h264 and h265 , but the cost is not the same ... For the moement the best soc is Odroid MC1 solo and after s912 , this soc can make the transcode in software and it's works. My opinion is , for the moment, no HW codec ( no allwinner , no amlogic, no rockchip, no Exynos) can't works with transcode with ffmpeg , so i wait for it . 0 Share this post Link to post Share on other sites
JMCC 150 Report post September 3, 2018 On 8/30/2018 at 10:18 AM, martos said: no Exynos Exynos works. It's the only one I made work so far. This media script will install ffmpeg with HW encoding support on a Xenial image, and I'm working on a Stretch version. 0 Share this post Link to post Share on other sites
martos Topic author 3 Report post September 3, 2018 It don't work well : it use v4l2m m2m , it's not a complet use of vdu but and it's the same with the new hack of HW amlogic , less cpu but slow to transcode For an only -vcodec copy it's works (kodi , ffplay ... ) BUT to transcode it's more quick in software 0 Share this post Link to post Share on other sites
