Banana Pi Pro Armbian Bionic - No Network....

[jiapei100]

I installed Armbian_5.59_Bananapipro_Ubuntu_bionic_next_4.14.65 onto my Banana Pi Pro. However, there is Internet for now.

$ip address

gives me the following messages:

 

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
     inet 127.0.0.1/8 scope host lo
        valid_lft forever preferred_lft forever
     inet6 ::1/128 scope host
        valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 02:86:02:42:2f:4e brd ff:ff:ff:ff:ff:ff
3. wlan0: <NO-CARREIR,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
    link/ether 98:3b:16:e9:79:43 brd ff:ff:ff:ff:ff:ff

 

 

It looks like this version of Ubuntu does NOT come with a suitable driver for Banana Pi Pro?

 

I even modified /etc/network/interfaces to

# Network is managed by Network manager
auto lo
iface lo inet loopback

#Wifi
auto wlan0
iface wlan0 inet static
    address 192.168.0.82
    netmask 255.255.255.0
    network 192.168.0.0
    broadcast 192.168.0.1
    gateway 192.168.0.1
    dns-nameservers 192.168.0.1 8.8.8.8
    wpa-ssid  XXXXXXXX
    wpa-psk YYYYYYYY

 

 

Have NO idea what to do now... Should I build the network driver from scratch? But, which driver is it?

Anyway, please give me some suggestions?

 

 

Have a nice day.

Pei

 

 

 

[Igor]

Manual for start perhaps?

 

https://docs.armbian.com/User-Guide_Getting-Started/#how-to-connect-to-wireless

[jiapei100]

@Igor

 

Several months passed. I totally forgot... Sorry... Problem solved !!!

Thank you so much... Have a nice day...