Kevin Welsh Posted March 16, 2016 Share Posted March 16, 2016 I need some help getting Eth0 working on an ITEAD device. At this point, I see the device (Eth0), but it does not seem to create DHCP traffic (testing with Wireshark) using dhclient eth0 I'm starting from the Cubietruck image. Link to comment Share on other sites More sharing options...
Igor Posted March 16, 2016 Share Posted March 16, 2016 You might only need a proper u-boot init config. Try Banana image ... check if original config for this board exits in mainline U-boot ... if not, some research and development will be needed. Link to comment Share on other sites More sharing options...
Recommended Posts