SBC News

GL.inet Brume 2 is an OpenWrt router, or rather a “security gateway” as the company calls it, powered by a MediaTek MT7981B (Filogic 820) dual-core Cortex-A53 processor, and equipped with a 2.5GbE WAN port and a Gigabit Ethernet LAN port. The device also comes with a USB 3.0 port for storage and a USB Type-C port for power. It is offered with either a plastic enclosure (GL-MT2500 model) or an aluminum allow case (GL-MT2500A model), and with WireGuard and OpenVPN, is suitable to host a VPN server and “monitor, manage, and configure SD-WAN settings”. Brume 2 (GL-MT2500/GL-MT2500A) specifications: SoC – MediaTek MT7981B (Filogic 820) dual-core processor @ 1.3 GHz System Memo…

Description Hardkernel bumbped their kernel sources, so those patches are not needed anymore. How Has This Been Tested? [x] Build test only Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

With only a few months passing since our last new joiner update, it should come as no surprise that the Collabora crowd has expanded yet again. Our flexible disposition affords us an exceptional bunch to onboard when opportunity knocks, but also leaves room to hear new voices as we shape our path forward. View the full article

We’ve previously tested Ubuntu 22.04 on Khadas VIM1S Amlogic S905Y4 SBC, so we’ll switch to Android 11 in the second part to check out the user experience and benchmark the system under Android. Installing Android 11 on Khadas VIM1S board with OOWOW We’ll basically follow the same procedure as with Ubuntu to flash the Android OS. Press and hold the Function button, press the Reset button, and release the Function button. to enter the OOWOW Wizard, and if an Ethernet cable is not connected, select Network to configure Wi-Fi as the installation process requires downloading an image from Khadas servers. This time, we’ll select the latest Android 11 image namely vim1s-android…

ATOMS3 Lite is the latest ESP32-S3 IoT platform from the M5Stack Atom series wireless programmable controllers, doing without the 0.85-inch display and IMU sensor found in the ATOM S3 development kit simply using an RGB LED instead. M5Stack ATOM S3 Lite features the ESP32-S3FN8 WiFi and Bluetooth SoC with 8MB SPI flash, an infrared transmitter, a USB-C port for power and programming, a few I/O pins, user and reset buttons all in just a 24x24x9.5mm housing. ATOMS3 Lite specifications: Wireless MCU – Espressif Systems ESP32-S3FN8 dual-core 32-bit Xtensa LX7 microcontroller with AI vector instructions up to 240MHz, RISC-V ULP co-processor, 512KB SRAM, 2.4GHz WiFi 4 (802.11…

Description In order to have as low maintenance costs with packages, merge them together. bookworm bullseye -> bookworm buster -> bookworm common focal -> lunar jammy -> lunar kinetic -> lunar lunar sid -> bookworm Difference is only in different components for Ubuntu or Debian. If we move this to build script, we can merge things even more. Jira reference number AR-1557 How Has This Been Tested? Files which are gone VS. armbian master. Need to check if we miss anything from those: [ ] Bookworm CLI https://paste.armbian.com/qapiyimeco.apache [ ] Bullseye CLI https://paste.armbian.com/ixiduvaquq.apache [ ] Jammy CLI https://paste.armbian.com/m…

After the T-Display-S3 AMOLED board, LILYGO has launched another ESP32-S3 board with an AMOLED display named the T-Track that features a smaller 1.1-inch AMOLED display and a trackball that allows the user to navigate any menu or user interface shown on the display. The rest of the board’s specifications are very similar with an ESP32-S3R8 dual-core chip with 8MB PSRAM providing WiFi and BLE connectivity, a 16MB SPI flash for storage, two rows of pins for up to 18x GPIOs, a Qwicc connector for module expansion, and support for USB-C charging and a LiPo battery for power. T-Track specifications: Wireless MCU – Espressif Systems ESP32-S3R8 dual-core Tensilica LX7 @ up to 24…

Description Enable the DLN2 driver for support the USB IO board View the full article

Description As per subject, by forum user request - nothing fancy, just an ID added to some source code files How Has This Been Tested? [x] Compiled current 6.1 kernel [x] Compiled edge 6.4 kernel Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Dear Armbian Community, We’re excited to bring you the latest Armbian updates. Infrastructure Improvements In the previous month, we dedicated our efforts to enhancing our Content Delivery Network (CDN). This involved upgrading redirector and the main rsync server to ensure faster and more reliable access to Armbian resources. This month, we’re shifting our focus towards improving development and maintenance management, both internally and externally. We are also in the process of refining our support policies to better serve the Armbian community. Wallpaper Competition We’re thrilled to announce the successful conclusion of our recent wallpaper competition. We rece…

Description Devicetree is already in https://github.com/armbian/linux-rockchip so just a board config is enough How Has This Been Tested? [x] ./compile.sh BOARD=rock-5-itx BRANCH=vendor BUILD_DESKTOP=no BUILD_MINIMAL=no DEB_COMPRESS=xz KERNEL_CONFIGURE=no RELEASE=bookworm KERNEL_GIT=shallow, flashed to emmc and boot Checklist: Please delete options that are not relevant. [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules Vie…

The final installment of a series explaining how Collabora is helping shape the video virtualization story for Chromebooks with a focus on the future plans for cros-libva and cros-codecs. View the full article

Description The u-boot was tied to a specific tag. Now I am setting it to branch so that updates can be directly pulled into Armbian as well. Also removed a patch that since has been merged into the upstream repository and rebased the patches. The compilation of u-boot used to crash the docker desktop on my macbook, so included a fix for that as well. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh BOARD=khadas-vim4 BRANCH=legacy u-boot Checklist: Please delete options that are not relevant. [ ] My code follows the style guidelines of this pro…

Collabora is heading to Amsterdam with talks, demos, and workshops covering Embedded Linux, KernelCI, Bluetooth & Auracast, mainline video capture for Rockchip, and more. Join us to see our latest open source work in action! View the full article

The Raytron SE5 1280 is a high-resolution uncooled infrared module designed for integration into OEM thermal imaging systems. Based on a 1280 × 1024 uncooled VOx infrared detector with a 12 μm pixel pitch, the module delivers more than 1.3 million infrared pixels in a compact form factor measuring no more than 29 × 29 × 15.7 mm and weighing less than 26 g. 1280 × 1024 VOx Detector for High-Resolution Thermal Imaging At the core of the SE5 1280 is a 1280 × 1024 uncooled VOx infrared detector with a 12 μm pixel pitch, operating in the 8–14 μm long-wave infrared (LWIR) band. With more than 1.3 million infrared pixels, the detector provides a substantially higher spatial reso…

Description Support Xunlei Onecloud Xunlei Onecloud used to be popular in China due to it's cheapness(Only 50 yuan, about 8 dollar). Due to the lack of drivers, the vpu(Video Processing Unit) and hdmi are not working. Fortunately I found a thirdpart kernel xdarklight/linux support them. I will open another PR for it due to it affect not only this but also another meson8b deviecs - Odroid C1. Also I didn't add u-boot parameter. Beacuse: I didn't find a suitable u-boot source It isn't a development board, it could only boot from emmc's u-boot How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details…

Description Switch rockchip64 family to u-boot v2022.04 This PR supersedes u-boot upgrade part from #3719 Jira reference number AR-1228 How Has This Been Tested? Testing with rk3399 boards [ ] Khadas Edge-V [ ] NanoPi M4V2 [ ] RockPi 4 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Vecow has announced a series of new system-on-modules and development kits based on Mediatek Genio 350, Genio 500, or Genio 1200 processors for AIoT applications ranging from smart security, smart retail, and traffic vision to digital signage. This follows last week’s news about ADLINK LEC-MTK-I12000 SMARC module and devkit powered by MediaTek Genio 1200 Cortex-A78/A55 AIoT processor, but Vecow also offers solutions based on the entry-level Genio 350 quad-core Cortex-A53 processor, and the mid-range Genio 500 octa-core Cortex-A73/A53 processor. ESOM-MT-350 Genio 350 system-on-module and devkit Specifications: SoC – MediaTek Genio 350 quad-core Cortex-A53 processor @ 2.0GH…

From KernelCI's new home, the latest on Zink (OpenGL on Vulkan), OpenXR & Monado, PipeWire in the automotive industry, JPEG2000, and GStreamer on the Magic Leap One, Collaborans gave talks in 6 different devrooms, as well on the main track. View the full article

Berlin, Germany - from 05/11/2015 to 07/11/2015: The systemd.conf is the first conference devoted to the systemd project. It aims to bring developers, distribution packagers and devops professionals together to present, discuss, and work on that topics that will shape the future of the systemd project. View the full article

We wrote about the UP 4000 SBC with an Intel Apollo Lake processor and Raspberry Pi form factor yesterday. But today, I noticed the UP community had put up a benchmarks comparison between the UP 4000 board, the original UP board (Atom x5-8350), the Raspberry Pi 4, and NVIDIA Jetson Nano. They used several of the Phoronix Test Suite benchmarks running on Ubuntu 20.04 (x86) or Ubuntu 18.04 (Arm) on all four boards. The UP 4000 board used featured an Intel Celeron N3350 dual-core processor @ 2.40GHz, the 2GB RAM version of the UP Board, an RPi 4 with 4GB RAM, and a Jetson Nano developer kit with 4GB RAM. As one would have expected, the UP 4000 is ahead in most tests, even t…

Description Enable Plymouth for onecloud How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Build and boot to check Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Firefly EC-R3588SPC industrial mini PC is based on the Rockchip RK3588S octa-core Cortex-A76/A55 processor and offers various interfaces used in industrial settings such as RS485 and RS232 serial interfaces, a CAN Bus, a relay, and digital input. The system is offered with up to 32GB RAM and 128GB eMMC flash, supports M.2 NVMe or SATA storage, as well as Gigabit Ethernet, Fast Ethernet, WiFi 4, Bluetooth 5.0, and 4G LTE cellular connectivity. You’ll also find 8K-capable HDMI and DisplayPort (USB-C) video outputs, some USB ports, and a 3.5mm audio jack. Firefly EC-R3588SPC specifications: SoC – Rockchip RK3588S octa-core processor with CPU – 4x Cortex-A76 cores @ up to 2.4…

Description Forgot to add this to the script linter at PR. Jira reference number AR-1399 View the full article

Description In order to achieve full compatibility between kernel, headers and libc, we need to build kernel per distribution, native, with distro compilers. In order to achieve that, we also need to store kernel into its repository. This method also significantly increases arm64 build load. To do: [ ] secure at least two serious arm64 irons [ ] merge sub components Jira reference number AR-1407 How Has This Been Tested? [x] Basic tests Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to t…

Mekotronics R58X-4G is an update to the company’s R58X Rockchip RK3588 mini PC with support for 4G LTE mini PCIe modules and PoE power. The computer is sold with up to 16GB RAM, up to 128 GB eMMC flash, support SATA and NVMe storage, offers two 8K capable HDMI and DisplayPort video outputs, one 4K HDMI input, two Gigabit Ethernet ports, a WiFi 6 and Bluetooth 5.2 module, a few USB ports, and a terminal block with RS232 and RS485 interfaces. Mekotronics R58X-4G specifications: SoC – Rockchip RK3588 octa-core processor with four Cortex-A76 cores @ 2.4 GHz, four Cortex-A55 cores @ 1.8 GHz, an Arm Mali-G610 MP4 GPU, a 6TOPS NPU, 8K 10-bit decoder, 8K encoder System Memory – 4…

Description Based on https://github.com/armbian/build/issues/4690 Jira reference number [AR-9999] How Has This Been Tested? [x] Using the command [ ] ??? [ ] Profit Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules This obviously needs adjustment for armbian-next. View the full article

Digi International ConnectCore MP13 system-on-module (SoM) is powered by the just-announced STMicro STM32MP13 Cortex-A7 microprocessor and integrates a pre-certified WiFi 5 and Bluetooth 5.2 module for applications in the medical, smart energy, and industrial sectors. The module is also equipped with up to 1GB RAM and 1GB SLC NAND flash, and exposes I/Os through LGA pads and/or castellated holes with interfaces such as dual GbE, USB 2.0, I2S and SPDIF for audio, CAN FD, analog inputs, and more. Contrary to the company’s earlier DigiConnect Core MP15 based on STM32MP15 MPU, the MP13 does not provide multimedia functions, display, and camera interfaces. Digi ConnectCore MP1…

Description As described in the forum topic https://forum.armbian.com/topic/35677-tinkerboard-not-booting-after-updates/#comment-185896, upgrading on Asus Tinkerboard breaks the bootloader and prevents the entire system to reboot. As side effect - but not yet reported by anyone - should also break other rk3288 and rk322x board bootloaders. This PR restores the previous post-install platform_install.sh script for each board/family as it was before the family merge. Jira reference number AR-2109 How Has This Been Tested? [x] Compiled tinkerboard target, extracted the u-boot .deb package and manually inspected platform_install.sh script, not tested on a live system [x] C…

Description This PR is a cherry-picked commit from an old PR https://github.com/armbian/build/pull/4643 Unfortunately I seem to have borked the linked PR. Using git rebase main usually works, but with a PR going this far back, something seems to not have rebased as expected. Please let me know if you know why this is 😄 The commit includes a fix from https://github.com/armbian/build/commit/7488222b2aac8bc6a395b6714dbac3f88177585e View the full article

Legacy: use TAG instead of BRANCH (gives us more control) Current: update DTS files Current: add needed patches up to v1.0.8 Fixup bluetooth node and disable by default (half broke anyway) Misc fixups to bananapif3.wip and spacemit.conf file View the full article

This week in Armbian development saw significant progress across board support, desktop environments, and infrastructure. Notably, NanoPC T6 LTS Plus was added as a reusable board, and support for Ubuntu 26.04 LTS ("Resolute") expanded to desktop package coverage and testing. Multiple improvements targeted desktop environments, including package updates, installation fixes, and branding enhancements for browsers. Kernel and bootloader updates were implemented for various boards, with mainline kernel bumped to 7.0 stable and u-boot upgrades for Rockchip devices. Infrastructure enhancements included new CI workflows, multi-arch unit tests, and migration to a REST API. Sever…

Earlier this month, we saw how the humble ESP32-S3 could be turned into an SDR transmitter and receiver; then we saw developer h0m3us3r release the w1700k-sdr project, which turns a Gemtek W1700K Wi-Fi 7 router into a wideband SDR receiver. The LR2021-SDR open-source project by Samuel Reynolds (SAMS0N1TE) follows the same principle and turns the Semtech LR2021 LoRa transceiver into a software-defined radio (SDR) capable of receiving signals from 100 MHz to 2.74 GHz. Using an undocumented command in the chip’s ROM, this project exposes raw 16-bit I/Q samples, allowing software to decode P25 Phase 1 digital voice, POCSAG pager messages, and analog FM signals without an exte…

We’ve previously seen WiFi security cameras promising a year of battery life with products like the Eufy EverCam, but the Ingenic T31-based Smart Video Application Development Kit by Innophase may allow for the development of even more power-efficient WiFi AI security cameras with AI processing last can last over one year. The development kit combines Ingenic T31 MIPS & RISC-V camera SoC with Innophase Talaria TWO INP101x ultra-low-power (57µA @ DTIM10) Wi-Fi & BLE wireless module, that is estimated to last 14.4 months on a 3,000 mAh battery while operating at a 99.3% idle, 0.7% video capture ratio. Development kit content: Board with Ingenic T31 MIPS processor @ …

With the 5.5 kernel released earlier this week, here's a detailed look at Collabora’s contributions, including work to improve upstream support of peripherals used together with the i.MX 6 family of processors. View the full article

A Coruña, Spain - from 07/12/2015 to 09/12/2015: The Web Engines Hackfest is a hacking oriented invitation-only event involving members from all parts of the Web Platform community, including those who work on Blink, WebKit, Gecko, and Servo. View the full article

Wireless power, no matter how inefficient it may be, sounds good and even looks good with the “5V remote wireless power supply LED pack” we feature in this post. It also feels magical with the LEDs lighting up thanks to magnetic resonance coupling technology. The solution comes with a coil as a transmitter and each LED bead also includes a small coil as a receiver. When the two are coupled, energy can be transferred from the transmitter to the receiver through the air, paper, or plastic casing, and the LEDs will light up. The magnetic field intensity in this technology is said to be similar to that of the Earth’s magnetic field, and it will not be harmful to human health …

No descriptionView the full article

Description There was complain on forums that current way of blocking weak password is out of standard. Warning on weak password should be enough. Jira reference number AR-1385 How Has This Been Tested? [ ] Build fresh image and see if it works. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Switch CURRENT to 6.1.y and remove older patches Jira reference number AR-1484 How Has This Been Tested? [x] Build test View the full article

Heata, which began as an innovation project with British Gas, is a UK company that connects a server to your hot water cylinder and provides hot water to the house master for free up to 4.8 kWh per day, and at least 2.5 kWh as per contractual obligations. Companies spend millions of dollars to cool the servers hosted in their data centers and most of that heat is completely wasted. So Heata decided to create a win-win solution that lowers their cooling cost and provides free hot water to whoever has their server installed in their house. The installation process is said to be tested and approved by British Gas so you don’t lose your hot water cylinder warranty, and the he…

Description I want to add a ppa to a new appgroup. I need ca-certificates before running apt update or I will get No system certificates available. Try installing ca-certificates.. Log: https://paste.armbian.com/oponabanom How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] apt update success with ppa Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes g…

Description The kernel build fails with: [🐳|🔨] drivers/net/wireless/rtl88x2bu/os_dep/linux/wifi_regd.c: In function 'rtw_regd_init': [🐳|🔨] drivers/net/wireless/rtl88x2bu/os_dep/linux/wifi_regd.c:409:36: error: 'REGULATORY_IGNORE_STALE_KICKOFF' undeclared (first use in this function) [🐳|🔨] 409 | wiphy->regulatory_flags |= REGULATORY_IGNORE_STALE_KICKOFF; [🐳|🔨] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [🐳|🔨] drivers/net/wireless/rtl88x2bu/os_dep/linux/wifi_regd.c:409:36: note: each undeclared identifier is reported only once for each function it appears in [🐳|🔨] make[6]: *** [scripts/Makefile.build:252: drivers/net/…

Description Legacy - 5.15.123 -> 5.15.124 Current - 6.1.42 -> 6.1.43 Edge - 6.4.7 -> 6.4.8 Toggled CONFIG_RCU_TRACE in linux-sunxi-current.config to fix booting on 32-bit kernel How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Booted legacy, current and edge images on Orange Pi Prime (sun50i H5) [X] Booted legacy, current and edge images on NanoPi Duo2 (sun8i H3) Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas…

Original version destroyed journal on command postrotate as files in /var/log.hdd/journal are overwritten by cat. With the patch journal is not damaged anymore. Description In original version in postrotate files in /var/log.hdd/journal are deleted by the command dest="/var/log/$file" cat $file > $dest as /var/log/journal is a symling to /var/log.hdd/journal files are cated on themselves which ends up with an empty file. How Has This Been Tested? check journal by journactl. There is no data earlier than today 0:00. Also "journalctl --verify" shows that journal is damaged. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a s…

This picks up from where we left off: https://github.com/armbian/build/pull/6771 Added Linux Legacy and Current. Legacy: 6.1.15 Current: 6.1.95 Wireless has been given its own function and patch directory. Bluetooth firmware added to armbian/firmware. esos.elf moved to: packages/blobs/riscv64/spacemit/ Host machine used for builds: Ubuntu Noble (aarch64) Images tested: Ubuntu Noble Minimal and Debian Sid Information: https://docs.banana-pi.org/en/BPI-F3/BananaPi_BPI-F3 https://gitee.com/bianbu-linux Flashing u-boot to eMMC: (This is not apart of the PR and needs to be added in the future.) echo 0 > /sys/block/mmcblk2boot0/force_ro sleep .50 dd if="bootinfo_emm…

A boot.cmd file still needs to be created, but this is functional. Overlay support is now baked into the syslinux patch. View the full article

this patch will fix ps4 controllers not working correctly on legacy and vendor kernel View the full article

Description Build breaks CI, temprally disabling. @FantasyGmm Re-enable once its sorted out. Checklist: [x] My code follows the style guidelines of this project View the full article

Three demos. One stand. From end-to-end HDR and a brand-new SoC running PanVK, to NVK and WebGPU out of the box — discover how Collabora pushed open source graphics forward at Embedded World 2025. View the full article

This week in Armbian development saw significant progress across board support, desktop environments, and infrastructure. Notably, NanoPC T6 LTS Plus was added as a reusable board, and support for Ubuntu 26.04 LTS ("Resolute") expanded to desktop package coverage and testing. Multiple improvements targeted desktop environments, including package updates, installation fixes, and branding enhancements for browsers. Kernel and bootloader updates were implemented for various boards, with mainline kernel bumped to 7.0 stable and u-boot upgrades for Rockchip devices. Infrastructure enhancements included new CI workflows, multi-arch unit tests, and migration to a REST API. Sever…

Linus Torvalds announced the release of Linux 7.3 on LKML last Sunday: It’s Sunday afternoon, and this week I somehow kept my wits together long enough to keep track of the day of the week, so the release isn’t randomly delayed. Will wonders never cease? Anyway, nothing very special seems to have happened this last week, so as expected the final 7.3 is out, and thus tomorrow the merge window for 7.4 opens. Except I’m on my annual family vacation, so instead of merging anything first thing in the morning, I’ll spend most of the day on a boat and under water. I’ll get back to merging in the afternoon, but I expect my schedule to be a bit unusual for a while. I hope I can st…

Description Don't add any packages to CSC repositories (stretch, bionic, ...), but generate index. Jira reference number AR-1177 How Has This Been Tested? [ o.k. ] Using config file [ /home/igorp/Devel/build/userpatches/config-example.conf ] [ o.k. ] Command line: setting REPOSITORY_UPDATE to [ update ] [ o.k. ] Using user configuration override [ userpatches/lib.config ] [ warn ] Skipping adding packages (not supported) [ stretch ] [ warn ] Skipping adding packages (not supported) [ bionic ] [ o.k. ] Checking and adding to repository buster [ main ] [ o.k. ] Creating section [ main ] [ o.k. ] Checking and adding to repository bullseye [ main ] [ o.k. ] Adding bullseye …

Microchip has just announced the 1 GHz SAMA7G54 single-core Arm Cortex-A7 microprocessor (MPU) with MIPI CSI-2 and parallel camera interfaces, as well as up to four I2S, one SPDIF transmitter and receiver, and a 4-stereo channel audio sample rate converter. The company specifically launched a single-core processor to offer a lower power solution for AI camera and audio solutions, and the chip is coupled with the MCP16502 power management IC that has been optimized to provide the best power/performance ratio for the SAMA7G54. Microchip SAMA7G54 specifications: CPU – Arm Cortex-A7 based MPU @ up to 1GHz with 256KB L2 cache Memory – DDR2/DDR3/DDR3L/LPDDR2/LPDDR3 up to 533MHz…

In less than 10 days, Collabora will be in Brussels to take part in this year's edition of FOSDEM! Come say hello, or catch one of the dozen talks (in the main track and 6 different devrooms) given by Collaborans! View the full article

Seoul, South Korea - From 20/10/2015 to 23/10/2015: We will be exhibiting at the GENIVI Showcase during the All Member Meeting. View the full article

Seeed Studio has introduced a new CAN Bus Grove module based on 120 MHz Gigadevice GD32E103 Arm Cortex-M4+ microcontroller with support for CAN FD at up to 5Mbps and controlled by AT command over a serial interface. The new module appears to be a drop-in replacement for the company’s $19.90 Serial CAN-BUS Grove module based on Microchip MCP2551 and MCP2515, and the main benefit of the new GD32E103 module is that it is much more cost-effective going for only $4.90 including shipping. GD32E103 CAN BUS Grove module specifications: MCU – Gigadevice GD32E103 Arm Cortex-M4F microcontroller @ up to 120 MHz with 64KB to 128KB flash, 20KB to 32KB SRAM CAN Bus – 2-pin terminal bloc…

Description Maintenance. How Has This Been Tested? [x] Build test of all variants manually [x] Build in CI Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

What comes after Qualcomm Robotics RB3, RB5, and RB6 platforms? Apparently, it’s Qualcomm Robotics RB1 and RB2 platforms powered by Qualcomm QRB2210 and Qualcomm QRB4210 processors respectively and optimized for cheaper, smaller robots with lower power consumption. But Qualcomm is one of the lamest companies known to man, so they did not include any photos when announcing the Robotics RB1 and RB2 platforms, so I’ll focus this post on Lantronix Open-Q 2210RB and 4210RB system-in-packages (SiP) based on the same processors, as well as the Open-Q RB1/RB2 development kit. Open-Q 2210RB and 4210RB SiP The new system-in-packages are very similar to the earlier Open-Q 2290CS and…

Renesas RZ/T2L is a cost-optimized single-core Arm Cortex-R52 microprocessor (MPU) with an EtherCAT controller based on the same architecture as the higher-end Renesas RZ/T2M dual-core Cortex-R52 processor introduced last year, but at about half the size. The new MPU enables high-speed and accurate real-time processing performance required for AC servo drives, inverters, industrial robots, collaborative robots, etc.. used in factory automation (FA), medical equipment, building automation (BA), and other sectors and applications where EtherCAT is being adopted. Renesas RZ/T2L key features and specifications: CPU – Arm Cortex-R52 clocked at up to 800MHz with 16KB L1 I/D cac…

Makeblock Ultimate 2.0 is an educational robot kit that can be used to easily create up to 10 different types of robots. An Arduino-compatible Mega 2560 MCU board serves as the main controller and there are over 550 mechanical parts and electronic modules. The robot can drive up to 4 encoder and stepping motors, control up to 10 servo motors to work simultaneously, and can also be connected to Arduino and Raspberry Pi boards for more complex projects. The review/tutorial is fairly long, so if you are short on time, you can jump to different sections by clicking on some of the links below: MegaPi control board and main modules description mBlock 5 visual-programming IDE in…

The recommended name for enable GPIOs property in regulator-gpio is enable-gpios. This is also required by bindings: meson-g12b-bananapi-cm4-cm4io.dtb: regulator-vddio-c: Unevaluated properties are not allowed ('enable-gpio' was unexpected) Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Patch is obsolete. The rk3399 has a crypto IP handled by the rk3288 crypto driver so since 6.2 there is a node for it. Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. on RockPi 4b crypto is able to complete init, which otherwise fails Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my ow…

No descriptionView the full article

Description ddbr was failing on a recent jammy build. The issue is that lsblk output has changed sometime since this script was written. The logic to parse out the $runfrom drive was returning duplicate info, so instead of 'mmcblk0' the value was 'mmcblk0 mmcblk0' Having this duplicate value was causing an error further down the script. Fix is to add ' | sort | uniq' this was already being done on the other lsblk outputs, just not this one. I've run into this before, and I guess at that time, I forgot to submit a PR for the fix, or it was for a different script that had the same issue. Changes to be committed: modified: packages/bsp/common/usr/sbin/ddbr Jira refere…

Description Mainline kernel linux-6.7.y has broken dsi panel since 6.7.6, so we use back v6.7.5 avoid it. Other sm8250 device xiaomi 10 doesn't support panel in kernel so it should be fine. Use typec pd patch from lujianhua and now the typec port can auto switch to host mode when usb deivices are plugged in. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=xiaomi-elish BRANCH=sm8250 DEB_COMPRESS=xz KERNEL_GIT=shallow DEB_COMPRESS=xz [x] Xiaomi pad5 pro works fine. Checklist: [x] My code follows the style guidelines of this project […

Description The vendor config of rk35xx is originally for rk3588 which doesn't need this driver. But rk3568 need it. CONFIG_NET_VENDOR_MOTORCOMM=y is introduced by rewrite-kernel-config, I guess it should be fine. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh BOARD=hinlink-hnas BRANCH=vendor BUILD_DESKTOP=yes BUILD_MINIMAL=yes DEB_COMPRESS=xz KERNEL_CONFIGURE=no RELEASE=jammy KERNEL_GIT=shallow [x] Tested on hinlink hnas which has 4 2.5 inch sata. Checklist: Please delete options that are not relevant. [x] My code follows the style guideline…

Description How Has This Been Tested? Setting a version to pinning file and reinstalling / upgrading packages. Checklist: [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

BIOSTAR BIWCL-PAT is a 3.5-inch industrial SBC built around the Intel Core Series 3 “Wildcat Lake” SoC family, ranging from the Core 3 304 to the Core 7 360. The board supports up to 64GB DDR5-6400 memory, three independent displays, and dual 2.5GbE networking. It also features three M.2 slots for NVMe storage, Wi-Fi/Bluetooth, and 4G/5G cellular connectivity, along with USB 3.2 ports, four serial interfaces, and an 8-bit digital I/O header. The compact 148 x 102mm form factor makes it suitable for industrial automation, edge computing, AIoT, human-machine interfaces (HMI), and POS/kiosk applications. BIOSTAR BIWCL-PAT specifications: Wildcat Lake SoC (one or the other) I…

Description As the Linux Kernel maintainers have decided that an exposed SPI interface is not a device, add a compatible device type to fix the intentional breakage of spidev functionality for single board computer usecases Jira reference number AR-1196 How Has This Been Tested? Compilation testing, functional testing proved concept for Sunxi (@The-going), Rockchip64 (@lanefu) Implemented on: [X] Meson64 [X] Sunxi (pre-existing, not part of this PR) [ ] Rockchip64 [ ] Rockchip Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ …

What better way to start the new year than by highlighting the newest members of our engineering and administrative teams who joined in Q4 2019! Please join us in welcoming Antonio, Afonso, Narciso and Eleni! View the full article

For those who like their I/O packetised, GLib now has a companion for its GIOStream class — the GDatagramBasedinterface, which we’ve implemented as part of R&D work at Collabora. View the full article

ITEAD has introduced the SONOFF NSPanel Pro Smart Home control panel running Android 8.1 on a Rockchip PX30 quad-core Cortex-A35 processor and acting as a Smart Home gateway thanks to an 802.15.4 radio for Zigbee 3.0, and 2.4 GHz 802.11b WiFi for connectivity. The NSPanel Pro follows the ESP32-powered SONOFF NSPanel introduced just last year but offers much more flexibility with Android, 2GB RAM, 8GB eMMC flash, and also offers a slightly larger 3.95-inch capacitive touchscreen display with 480×480 resolution. SONOFF NSPanel Pro specifications: SoC – Rockchip PX30 quad-core Cortex-A35 processor with Arm Mali-G31 GPU System Memory – 2GB DDR3 Storage – 8GB eMMC 5.1 flash Di…

A TDP (Thermal Design Power) value in Watts will usually be provided for Intel and AMD processors to help manufacturers design an appropriate thermal solution for a given processor, and it’s often used to estimate power consumption by consumers. But TDP is also often configurable, and manufacturers may decide to increase to decrease the value for higher performance or lower power consumption, so we’ll show you how to check the TDP value, or more exactly PL1 and PL2 power limits in both Windows 11 and Linux (Ubuntu 22.04). Note that TDP is being replaced by PBP (Processor Base Power) in newer processors, with PL1 (Long Duration) corresponding to BPB, and PL2 (Short Duratio…

Description Many network cards (wired and wireless) now require specific firmware to work, these are usually included in linux-firmware. The idea of this commit is to include some common firmware in armbian-firmware to solve driver loading problems. After that we can remove the same firmware files on armbian-firmware. Note: Didn't copy the brcm part from linux-firmware because I don't have the relevant hardware to test. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] rtl8153 (NanoPi R1S H5) [x] mt7921 (Radxa ROCK3A) Checklist: [x] My code follows the style…

Description Partly resolves #4306. How Has This Been Tested? If the kaslrseed command hasn't been compiled in to u-boot, it gracefully skips generating the kASLR [X] Booted on a NanoPi R4S Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [X] Any dependent changes have been merged and published in downstream modules View the full article

SMDT AIoTBOX-3568GK is an industrial control PC powered by a Rockchip RK3568 quad-core Cortex-A55 AIoT processor and offering plenty of interfaces including six USB ports, four RS232 ports, and terminal blocks with RS485 and CAN bus interfaces. The embedded computer ships with 2GB RAM and 16GB eMMC flash by default, and also features HDMI and LVDS display interfaces, 3.5mm jacks for headphones and microphone, as well as network connectivity through a Gigabit Ethernet port, WiFi, and optional Bluetooth and/or 4G LTE. AIoTBOX-3568GK specifications: SoC – Rockchip RK3568A quad-core Cortex-A55 processor @ up to 2.0GHz with Arm Mali-G52 2EE GPU with support for OpenGL ES 1.1/2…

Description This script calls amixer to set various mixer volumes, by simply trying a bunch of mixer names for each sound card in the system. In practice, this meant the amixer command was called 158 times for each sound card. The overhead of all these forks and probably also amixer startup added together to produce a noticable slowdown in startup. For example on an Orange Pi PC, the script took about 6 seconds per soundcard. This was on a system with a few extra USB soundcards (6 alsa cards in total): $ time bash ./armbian-audio-config.original real 0m35.662s user 0m20.145s sys 0m15.145s This commit modifies the script to spawn amixer only once per alsa …

Wilderness Labs Meadow F7v2 Feather is an STM32F7 Arm Cortex-M7 development board following the Adafruit Feather form factor and programmable with C# through a lightweight implementation of the .NET framework. We had previously seen the .NET Framework running on Android and Linux thanks to Xamarin’s Mono, but I don’t think I had ever a microcontroller-class board supporting the .NET framework and C# programming. But that’s exactly what the Meadow F7v2 Feather does. Meadow F7v2 Feather specifications: MCU – STMicro STM32F7 Arm Cortex-M7 microcontroller @ 216 MHz with 2D graphics and JPEG accelerators Memory – 32MB RAM Storage – 64MB flash Connectivity – 2.4 GHz WiFi and BL…

Description We are using debsums to check packages integrity. This packages is present in all distributions, we only need it for checking. After the installation, package was removed. Lets move this from packages lists. Jira reference number AR-1455 How Has This Been Tested? [x] Assembly of one rootfs Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings View the full article

Description linux-rk3399-legacy.conf is unused. Remove it. How Has This Been Tested? No references to file found in build system, only to linux-rockchip64-legacy.conf, which is for the same kernel. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description This tries to lower the DRAM frequency of Tritium H5 like what is done on other H5 boards, because I met stability issues when running Klipper on it. How Has This Been Tested? I built a U-Boot deb and flashed it to my Tritium H5, and the stability enhances. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Update odroidxu4-current kernel to 6.1.76. How Has This Been Tested? not yet, just committing current work. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Add the patching config file for rk35xx-vendor to easily patch in dts files by putting them in the dt folder. How Has This Been Tested? [x] Put new dts files in patch/kernel/rk3588-vendor/dt and successfully ran ./compile.sh build BOARD=nanopc-cm3588-nas BRANCH=vendor BUILD_DESKTOP=no BUILD_MINIMAL=no KERNEL_CONFIGURE=no RELEASE=bookworm. New patches were applied. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any d…

Description As per subject, bump rockchip 32 bit edge kernel to 6.9. Patches have been left as is because all of them applied fine, except for the device tree overlay compilation and installation. The device tree things have changed in 6.9 and the patch does not apply anymore. After some headeaches with the terrible makefiles, the second commit of this PR contains some hints on how I did the job and can serve as a icebreaker for other families perhaps. In particular: Some little accomodations in the overlay Makefile. the kernel makefile already supports dtbo files, but it wants the sources with .dtso extension, so all the device trees in overlay directory must be rena…

Description In an effort to reduce wifi driver burdens AR-1745, I went through the 6.10 kernel to check if any third party wifi drivers can be removed. The following drivers are part of the mainline kernel as of 6.10: RTL8723CS (driver: RTW88) RTL8811CU and RTL8821C (driver: RTW88) RTL8192EU (driver: RTL8XXXU) To give them some more time in the oven, use them not from 6.10 but from 6.11 onwards. I went through the Armbian forums, Atlassian and GiHub issues to see if anyone had used those drivers for these chips in the past and had reported issues. But I haven't found anything yet. RTL8723DS is also supported by RTW88, but I have not touched that driver since it is st…

Description Uboot from rockchips's latest 6.1 rkr3 SDK is here: https://github.com/ArmSoM/u-boot/tree/rk3576-6.1-rk3.1 And the two patches fixing sd card boot is already there. Add config CONFIG_ROCKCHIP_EARLY_DISTRO_DTB to load dtb from kernel so that devices like rk806 pmic is supported by uboot: DM: v2 no mmc device at slot 1 mmc@2a310000: 1 (SD), mmc@2a330000: 0 Bootdev(atags): mmc 1 MMC1: Legacy, 52Mhz PartType: EFI 258194 bytes read in 385 ms (654.3 KiB/s) DTB(Distro): /boot/dtb/rockchip/rk3576-armsom-sige5.dtb No misc partition boot mode: None dw_dp_bind zyb enter I2c1 speed: 100000Hz PMIC: RK8060 (on=0x80, off=0x80) vdd_cpu_big_s0 init 850000 uV vdd_npu_s0 7500…

Axera AX8860P is a new 16-core Cortex-A55 SoC with up to 128 TOPS/256 TOPS (FP4) NPU, 256-bit LPDDR5/5X memory, and PCIe 5.0 connectivity, aiming to power desktop AI solutions competing with NVIDIA DGX Spark at a fraction of the cost. Dr. Qiu Xiaoxin, founder and CEO of Axera, unveiled the new AX8860/AX8860P processor a few days ago at the China International Industrial Fair, along with upcoming products from Sipeed and Radxa. Axera AX8860P key features and specifications: CPU – 16x Arm Cortex-A55 processor AI – Up to 256 TOPS VPU – 64-channel decode, 16-channel encode Memory – Up to 128GB 256-bit LPDDR5x with 273GB/s bandwidth Interconnect – PCIe 5.0 + AXLink (C2C) casca…

Samsung Electronics has unveiled its first Universal Flash Storage (UFS) 4.0 solution based on the company’s 7th-generation V-NAND and a proprietary controller allowing speeds of up to 23.2 gigabits per second (Gbps) per lane or double the previous UFS 3.1 solutions. In more practical terms, Samsung UFS 4.0 storage will deliver a sequential read speed of up to 4,200 MB/s and a sequential write speed of 2,800 MB/s, corresponding to about 2x and 1.6x faster speeds over UFS 3.1 storage. Samsung also claims that power efficiency has been enhanced with a sequential read speed of up to 6.0 MB/s per milliampere (mA), or about a 46-percent improvement over UFS 3.1. An advanced Re…

Despite assurances by Eben Upton that there’s no supply shortage of Raspberry Pi CM4 modules for commercial and industrial customers, installations or projects requiring just a few modules may be out of luck. So alternatives are needed, and after seeing Rockchip RK3566-based SoMs compatible with Pi CM4, namely the Pine64 SoPine and Radxa CM3, Banana Pi is working on a Raspberry Pi CM4 compatible module powered by Amlogic A311D hexa-core Arm Cortex-A73/A53 processor. Banana Pi BPI-CM4 specifications: SoC – Amlogic A311D hexa-core processor with 4x Arm Cortex-A73 @ 2.0 GHz and 2x Arm Cortex-A53 @, Arm Mali-G52 MP4 (6EE) GPU, 5 TOPS NPU System Memory – 2GB/4GB LPDDR4 RAM Sto…

Multi-stream and broadcast audio features part of the Bluetooth LE Audio standard have been given a brand name by the Bluetooth Special Interest Group (SIG). Meet Bluetooth Auracast broadcast audio, or simply Auracast for shorts. As a reminder, Bluetooth Audio LE broadcast enables an audio transmitter, be it a smartphone, laptop, television, or public address system to broadcast audio to an unlimited number of nearby Bluetooth audio receivers that could be speakers, earbuds, or even hearing devices. Auracast broadcast audio will let users invite others to listen to the same music without disturbing others around them, for example, a group of friends could listen to the mu…

Sipeed has launched the Lichee RV Dock Pro kit for the company’s Lichee RV Allwinner D1 RISC-V module that builds on the earlier Lichee RV Dock carrier board and adds a MIPI/RGB LCD connector, two built-in microphones, as well as an on-board JTAG+UART debugger based on Bouffalo Lab BL702 microcontroller. Lichee RV Dock Pro specifications (preliminary): Supported system-on-module (SoM) – Lichee RV module with Allwinner D1 RISC-V processor @ 1 GHz, 512MB DDR3, MicroSD card slot, and USB Type-C OTG port Storage – Optional SPI flash Display interfaces HDMI port up to 4Kp30 MIPI LCD/RGB interface for up to 720p30 display Audio – 3W power amplifier, 2x analog microphone, suppor…

Dublin, Ireland - from 08/10/2015 to 09/10/2015: The GStreamer Conference is a conference for anyone interested in the GStreamer multimedia framework or Open Source and cross-platform multimedia. View the full article

Description Move to tag and remove not needed patches. Jira reference number AR-1297 How Has This Been Tested? [x] Build Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Radxa has been working on the ROCK 5 Compute Module (aka Radxa CM5) system-on-module compatible with Raspberry Pi CM4, but based on the more powerful Rockchip RK3588S octa-core Cortex-A76/A55 SoC. Just like the Raspberry Pi Compute Module 4, it comes in a 55 x 40mm form factor, but instead of just two high-density 100-pin board-to-board connectors, the module includes three to cater for the additional I/Os from the Rockchip processor, just like they did for the Radxa CM3 equipped with a Rockchip RK3566 processor. Radxa CM5 specifications: SoC – Rockchip RK3588S octa-core processor with 4x Cortex‑A76 cores @ up to 2.4GHz, 4x Cortex‑A55 core @ 1.8GHz Arm Mali-G610 MP4 “Odi…

AMD has added two new low-cost, low-power members to its UltraScale+ family with the Artix UltraScale+ AU7P FPGA and the Zynq UltraScale+ ZU3T MPSoC. Both devices are manufactured with the 16nm FinFET process and offer entry points to the transceiver-based UltraScale+ family with features such as high I/O-to-logic density, UltraRAM, DSP, and more. AMD Artix UltraScale+ AU7P FPGA The new AU7P FPGA is the smallest from the Artix UltraScale+ family with four 12.5Gbps transceivers, up to 82K system logic cells, 216 DSP slices, 4.9 Mbit RAM, and 248 I/Os. It is offered in a 10.5 x 8.5mm InFO package. The company says the chip provides up to 50% lower static power, 20% more I/O…

Bumps Vucko130/delete-older-releases from 0.2.1 to 0.2.2. Release notes Sourced from Vucko130/delete-older-releases's releases. v0.2.2 Full Changelog: https://github.com/Vucko130/delete-older-releases/commits/v0.2.2 Commits 4fc1741 Update action.yml 69fe4bf Create dependabot.yml 134ac2b Create codeql.yml 653dc03 Merge pull request #20 from HiGarfield/master 5128841 Merge pull request #15 from smallprogram/master 5fbfcd7 run with node16 c190a0c update index.js See full diff in compare view Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase. Depe…

MLfix is an open-source tool that combines novel unsupervised machine-learning pipelines with a new user interface concept that, together, help annotators and machine-learning engineers identify and filter out label errors. View the full article

We wrote about the new Z-Wave Long Range (LR) standard aka “Z-Wave Plus LR” promising four times the range and 10-year battery life in September 2020 but hadn’t heard much about it since then, at least until now, as Zooz has launched the ZST39 LR USB Stick and ZAC93 LR GPIO module based on a Z-Wave 800 Series chip, with the GPIO module compatible with Home Assistant Yellow and Raspberry Pi SBCs. Zooz 800 Series Z-Wave Long Range GPIO Module ZAC93 LR ZAC93 LR specifications: Z-Wave Frequency – 908.42 MHz (US, CA, MX) / 921.4 MHz (AU, NZ) / 868.42 MHz (EU) Wireless Range – Up to 1 mile/1.6 km in open space with Long Range enabled (up to 300 meters in open space, up to 76 m…

https://github.com/armbian/build/blob/main/patch/kernel/archive/rockchip-6.3/01-linux-0002-rockchip-from-list.patch#L248-L291 this looks like better alternative for this patch. and this patch has build issue when build mmc and dw_mmc-rockchip as module, no export symbol for mmc_power_off I should use bug report to create an issue to discuss, but I can't open docs.google.com. Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify yo…